Don'y forget to shoot me a text dbpsquad!! *804-837-1293* this is going to be SUPER FUN to chat with you guys and share some BTS!! If you did't check out the C& Corvette and Mach 1 *click here!* ruclips.net/video/DUR38NzmG1A/видео.html
60 ft on Jakes car is the lack lid low end torque, imo, from the CJ and stock converter. Hades still had the torque down low to get out the first 60ft because of the stock intake. The CJ is killing low end and needs a converter allow higher rpm launch to make up for that loss. Just my opinion. Stay safe guys!
Derek! I have a 2008 procharged GT. I notice the car will bog down if I don’t let it warm up.. you have any similar issues with Blucifer.. it only does it for a brief minute.. I notice when it does bog down the air/fuel ratio is slightly off but then in a few seconds it levels off.. any thoughts.. then it’s a beast.. my tuner says it’s normal in these types of super chargers this is common.
I would trade you some GT350 seats, but Brandon already sat on those Recaros. Y’all gotta get that Teletubby in the gym. Just because he’s the best driver in the squad doesn’t mean he gets to roll around in life.
Niggas wondering why it spun on the second hit LOL 14:11 maybe cause DBP wasn’t in the car on the second hit for the extra weight unlike the first dig since it didn’t spin LMFAO no brain….but I love the channel!!! I really want a Gen 3 Powertrain with a TR6060 swap or TR56 on a S197 or a Gen 2 with that setup….All you need is Coilovers or Drag Shocks/Springs with Wheel Hop Kit, Long Tube Headers, Ported Hi-Ram or Low-Ram Holly Manifold or Ported Cobra Jet Manifold, Ported Throttle body, OPGs+CS, Stg2 NA Cams, Clutch (preferably a Sprung Twin Disk), Short Shifter (Transmission Mounted), Fuel Pump/Injectors with Fuel Return, 4-4.5 inch Intake with a Velocity Stack out the Grill, 3.73 or 4.10 Gears (depending on Dig/Roll racing), and VP C85 or M5 Fuel (if your feeling confident), along with some Weight Savings/Carbon Fiber goodies…..like Front and Rear K-Member, “Half” Gut till front seats, Light Weight Brakes, Drag Pack with 15 inch rear, Radials, Carbon Fiber Racing Seats, and last but not least Carbon Fiber Doors….that would be a ONE HELL of an NA setup for Digs or Rolls depending on Suspension!!!
Sad weekend Derek, my Mach was rear ended, kid was doing 50 in a 25 and stuffed my prized mischievous purple metallic Mach 1. Looks to be totaled . My forever special Mustang is toast. I’m heartbroken and sick toy stomach. I’ll post pictures on your Facebook page. I’m truly devastated.😢
Like when you hook up with Jake! Trust me I’m not sleeping on the Mach one they are beasts! Jake’s mustang is sick love it! Put that exhaust on and maverick will sound awesome!
Derek, I would love for you to drive my car, if one day we could meet in WV when you guys come down there to the track. I have the 2019 procharged 10R80. I wish you could have driven it before you got rid of Hadies dude. Bro it's a rocket 🚀
Glad to hear you’ll be down here for streetcar takeover. I go every year to the car meet event held at Twin Peaks. Lots of really sick car and at the end of the night it turns into a mf movie. It gets wild out there, the cops let you do burnouts
Don'y forget to shoot me a text dbpsquad!! *804-837-1293* this is going to be SUPER FUN to chat with you guys and share some BTS!!
If you did't check out the C& Corvette and Mach 1 *click here!* ruclips.net/video/DUR38NzmG1A/видео.html
The interaction phone is a dope idea. People are really gonna appreciate that.
Apollo is legit my favorite S550 right now, she MOVES
Just watched jakes vid and now here what a great day
Ngl this made me miss Hades, that car still had so much potential. One of the greatest builds we never got to see😢
60 ft on Jakes car is the lack lid low end torque, imo, from the CJ and stock converter. Hades still had the torque down low to get out the first 60ft because of the stock intake. The CJ is killing low end and needs a converter allow higher rpm launch to make up for that loss. Just my opinion. Stay safe guys!
You right
You won't be disappointed in the kooks. I run those with corsa Extreme, and it's crazy loud. You should get the steeda clutch spring for the mach.
bro i just started the video and gotta say the intros are getting better and better.
Jake a good dude ✅️
Loving content bro. Killing your playlists. On Hades currently. You’ve inspired to finally start getting my 14 GT/CS right 😂
Man the 13-14 GT’s are beautiful bro! I have a 2014 GT in deep impact blue and I love it! Congrats!
gt500 fans helped a lot on my 13 paxton car. also have lund turn on fans at low speed. i never get a over 205 even when it’s over 95 degrees outside
10:08 THAT MUSTANG LOUD ASF AND FAST
He got 2 phones one for the fans and one for the bands💵😂
Let’s goooooo. Proud of your hard work Derek 🎉🎉 thanks for the response!
The new intros go soooo hard
I've got this setup and love it for skirting around.
Dude I need more of this gt
That car moves 🔥🔥
Yes sir derek,jake, and brqndon get together it is going to be a bangger
Really like Jake's s550 that matte black with the drag tires looks really good if I had a s550 I'd want it to look similar to that
Yeah his color scheme is pretty fire ngl
You should definitely do a inner chiller setup on it. Gavin from its just a 6 did it
Apollo is no joke
He is the real one
Great job dude, keep it up.
Love it man. Can’t wait till the Kooks. Thinking of doing the same. I have the Borla Atak on mine right now.
He does text back! 🤘🏽💙
Welcome back kik brother wow we missed ya maiiinnn
Ready for the new Gear!
I have that same setup on my Mach 1 that you’re gonna get Derek! Let me tell you it sounds beautiful and unique your gonna fall in love with it !
Def will stop by introduce myself if i see you . I don't have a mustang any more but love your content. Bring blucifer
Killer intro 💪🏽💪🏽💪🏽
Nice Mustang
So what kind of weight reduction ?
Seats
Wheels/tires
Aftermarket exhaust probably takes out about 40 lbs
Appreciate the response man! ✌🏻🤘🏻🤘🏻🤘🏻
Awesome video
Wonder why aftermarket headers make gains over factory. You would think factory would have the best flow, they designed the engine and know it best.
"its not obnoxious or anything its pretty tame".... 5 minutes later: "my ear is shot" lolll
The edits on the video 😂you gotta do more of these bro! Keep up the great work!
that intro was tuff🔥🔥
Would you ever do a positive displacement on the Mach1
He already has a centrifugal supercharger so that’s a no to a bolt on supercharger
Vid idea review on the 2024 mustang
Let's goooo. Can't wait for more content
Love from the gram love your contact Dereck
how many “FBO E85” builds we gonna do here. get on with it
Change the thermostat
Derek!
I have a 2008 procharged GT. I notice the car will bog down if I don’t let it warm up.. you have any similar issues with Blucifer.. it only does it for a brief minute.. I notice when it does bog down the air/fuel ratio is slightly off but then in a few seconds it levels off.. any thoughts.. then it’s a beast.. my tuner says it’s normal in these types of super chargers this is common.
Did you try a 160 degree thermostat and a hi flo radiator? Its supposed to be a huge improvement over stock.
🙌 yess
I would trade you some GT350 seats, but Brandon already sat on those Recaros. Y’all gotta get that Teletubby in the gym. Just because he’s the best driver in the squad doesn’t mean he gets to roll around in life.
I ran an 11.8 with mine.
Try pulling off the cervini hood rain tray and it may help you get some of that heat out from under there
He already did. It’s a couple videos back.
Take the new headers and get them ceramic coated. Save the interior heat. So worth it.
Minion looked like a kangaroo whenever he got buff.
I ran the super coolant additive and my car ran 8 degrees cooler on the same 107° degree day
Niggas wondering why it spun on the second hit LOL 14:11 maybe cause DBP wasn’t in the car on the second hit for the extra weight unlike the first dig since it didn’t spin LMFAO no brain….but I love the channel!!! I really want a Gen 3 Powertrain with a TR6060 swap or TR56 on a S197 or a Gen 2 with that setup….All you need is Coilovers or Drag Shocks/Springs with Wheel Hop Kit, Long Tube Headers, Ported Hi-Ram or Low-Ram Holly Manifold or Ported Cobra Jet Manifold, Ported Throttle body, OPGs+CS, Stg2 NA Cams, Clutch (preferably a Sprung Twin Disk), Short Shifter (Transmission Mounted), Fuel Pump/Injectors with Fuel Return, 4-4.5 inch Intake with a Velocity Stack out the Grill, 3.73 or 4.10 Gears (depending on Dig/Roll racing), and VP C85 or M5 Fuel (if your feeling confident), along with some Weight Savings/Carbon Fiber goodies…..like Front and Rear K-Member, “Half” Gut till front seats, Light Weight Brakes, Drag Pack with 15 inch rear, Radials, Carbon Fiber Racing Seats, and last but not least Carbon Fiber Doors….that would be a ONE HELL of an NA setup for Digs or Rolls depending on Suspension!!!
what’s the biggest size the shirts will come in???
Yesssir 🔥🔥🔥🔥🔥
Thanks for the txt brotha!!
You gotta take blucifer for sure
No scamming! The number legit works!
I got kooks 1 7/8 headers with hi flow cats on my gen 1 its perfect. Nice at idle and screams at WOT
Kooks is top
But ArH and stainless works are top too
Sad weekend Derek, my Mach was rear ended, kid was doing 50 in a 25 and stuffed my prized mischievous purple metallic Mach 1. Looks to be totaled . My forever special Mustang is toast. I’m heartbroken and sick toy stomach. I’ll post pictures on your Facebook page. I’m truly devastated.😢
Thats right kooks is the best headers
Is a tune required if you add longtubes with cats?
It’s legit, it’s him
What front lip does Apollo have?
Why does the color of the car change for like 15 seconds at the end of the vid
Can you explain what he met by drag mode will limit till 7th gear ? I’m always doing my roll races in drag.
Hey Derek how was your Mach 1 bumper conversion. Now I am scared to get one since Jake said that aftermarket bumpers aren’t that good? Thank you 🙏
Mine was A1 frfr
@@DerekBaranProductions bet bro thank you
At the end when he's talking I noticed the car behind him turn black what's up with that.
Is the intake manifold really worth it for power gains like the gt350 intake manifold
top end you should gain some power but you should also expect to lose a little bit of low end torque
Beadlocks on a n/a
*it’s those heavy beadlocks get rid of them you’ll run a 1,6 60ft*
Like when you hook up with Jake! Trust me I’m not sleeping on the Mach one they are beasts! Jake’s mustang is sick love it! Put that exhaust on and maverick will sound awesome!
Bluci deserves to be driven
Street car take over take my boy bluecifer
Derek, I would love for you to drive my car, if one day we could meet in WV when you guys come down there to the track. I have the 2019 procharged 10R80. I wish you could have driven it before you got rid of Hadies dude. Bro it's a rocket 🚀
Lol we are filming, suck in!
bro take blucifer to Charlotte
10r80 Procharged, Stainless Works Long Tubes here! Sorry bro, 10-speed for the win.
Texted you brother. Thanks for the stang content✊🏾‼️
I felt that high school pick up bro 😂
🔥🔥
Take blucifer and show some love to it and thanks for the text bro appreciate it
Channel been popping off recently!!! ❤
Put a 500 radiator in it.
Are gen 2 5.0 headers the same as gen 3 headers ?
15+
Good video. Love seeing you guys having fun . Best part of the video was meatball trying to hump the midget . LoL
Glad to hear you’ll be down here for streetcar takeover. I go every year to the car meet event held at Twin Peaks. Lots of really sick car and at the end of the night it turns into a mf movie. It gets wild out there, the cops let you do burnouts
All Maverick content all the time…when you going to sell that S197 already? Come on, you know you will…😎😂
I text derek and got a reply..then he called me fat.
It’s legit boys he responded to me twice 😅😅😅
Take Maverick.
2:26 Jake is definitely a scammer 🤣🤣🤣
Chill 😂😂😂
He is a scammer bruh Derek isn’t tho lol
I got a response!!!
idk what my number is but im sub 500!!
Hell yeah bro, give aways, merch allat🔥🔥🔥🔥🔥🔥count me in
Take bluesifer
Yoooo it’s jamessssssss
Let’s goooo hope I’m in the vid
Mmmmm now that is a stang 🫡