Toyota Tacoma (3.4L) - Power Steering Pump Replacement

Поделиться
HTML-код
  • Опубликовано: 28 дек 2024

Комментарии • 43

  • @timtrent8655
    @timtrent8655 27 дней назад

    Very direct and to the point. This helped me change the pump on my Tacoma. Thank you very much!!

  • @lmontes09
    @lmontes09 2 месяца назад

    Thanks for the great vid. These is what I look for in DYI vids, no fluff no BS down to the point! Excellent work!😎👍👍

  • @partstractor5242
    @partstractor5242 9 месяцев назад +2

    Vid is gold. Thanks for the upload

    • @hyr0llr
      @hyr0llr  9 месяцев назад

      Thank you.

  • @ernestogarcia8014
    @ernestogarcia8014 4 месяца назад

    Where does the return line go? The other end of the hose

  • @awakedust
    @awakedust 5 месяцев назад

    This is actually a really well made video, despite the blurry lens. It was exactly what I needed to convince me I could do this in one afternoon ( I was pinched for time!).
    Thank you!
    I would recommend people do a good flush before removing the old pump (see timmythetoolman video). My PS system had TONS of gunk in it.

    • @hyr0llr
      @hyr0llr  5 месяцев назад

      @@awakedust much appreciated.

  • @0v3r_cat
    @0v3r_cat 2 месяца назад

    Thx bro.. mine went out this morning soon as I got to work.. great vid.. thx

  • @erickguzman2932
    @erickguzman2932 8 месяцев назад +1

    Where did you source the washers and o ring?

    • @hyr0llr
      @hyr0llr  8 месяцев назад

      They come with the new pump

  • @ffyfy1
    @ffyfy1 7 месяцев назад

    Love your video thank you. Do you by chance know the torque spec on the pulley nut?

    • @hyr0llr
      @hyr0llr  7 месяцев назад

      Online i found 32 ft lb

    • @hyr0llr
      @hyr0llr  7 месяцев назад

      www.toyota-4runner.org/attachments/maintenance-detailing/53459d1321461747-belt-diagram-2002-4runner-comp-pdf

    • @ffyfy1
      @ffyfy1 7 месяцев назад

      Just subscribed, thanks for such a quick answer.

  • @johnmca5643
    @johnmca5643 2 месяца назад

    Thank you.....that's above my skill level. I'm pretty sure that's my problem.
    My squealing stops when I turn the wheel fully left and right.

    • @hyr0llr
      @hyr0llr  2 месяца назад

      Its not too bad of a job taking your time.but i completely understand. Hope the video was helpful regardless. Take car

  • @adriancastro7673
    @adriancastro7673 8 месяцев назад +1

    Is it safe to drive the truck if its making the noise while i wait for the new pump to be delivered. Or would you recommend not driving it till i fix it?

    • @hyr0llr
      @hyr0llr  8 месяцев назад +2

      If its making this same noise itll be fine. The noise is just the bearings arent happy anymore. If it sounds worse than this, id hold off.

  • @richarddiaz8248
    @richarddiaz8248 2 месяца назад

    Beautiful job

  • @luiscolon6952
    @luiscolon6952 22 дня назад

    Great Video Man🫡 what’s crazy about mine is, it didn’t even have that whining noise!mine was ticking and making a different sound! Replaced belts, no help! Changed the pulley, temporary silence, but then a more subtle ticking sound! But now my power steering pump is leaking! So I wonder if that will be the main culprit in all of this or if there a few different issues at play here!!!???!!!We shall find out! Keep ya updated, if anyone would be interested or if you have any input ( constructive, of course!) I’m all ears! (Technically I’m all EYES 👀, cuz I’m reading, NOT listening!😅)But I’ll be using this video for my swap!

  • @WIZARDELCAMPO
    @WIZARDELCAMPO 2 дня назад

    Podrías pasar el link de donde lo compraste?

    • @hyr0llr
      @hyr0llr  2 дня назад

      @@WIZARDELCAMPO rockauto.com

  • @dmironyuk
    @dmironyuk 6 месяцев назад +1

    What was the fluid level upon checking? "no response, guess he ran it dry😄"

    • @hyr0llr
      @hyr0llr  5 месяцев назад

      @@dmironyuk my bad some. Some messages i dont get a notifications on my phone.

    • @hyr0llr
      @hyr0llr  5 месяцев назад

      @@dmironyuk fluid level was fine after.

    • @hyr0llr
      @hyr0llr  5 месяцев назад +1

      I can only imagine my phone blowing up to comments throughout my videos on my channel. Again a i apologize.

    • @dmironyuk
      @dmironyuk 5 месяцев назад

      @@hyr0llr no worries 👌

  • @snowman1754
    @snowman1754 6 месяцев назад

    Mine is making that noise but I also notice that the pulley wobbles a little should I replace both??

    • @hyr0llr
      @hyr0llr  6 месяцев назад +1

      The pulley is on the shaft so i would say just the pump is fine. Unless somehow the pulley itself is bent.

  • @Wraith8162
    @Wraith8162 5 месяцев назад

    Was yours vibrating/rattling prior to replacement?
    Mine is making the exact same noise yours was making, I changed fluid as it was dark/black (324k miles) and the whine/rattling remains.
    Would you say replacement is necessary?
    Appreciate it.

    • @hyr0llr
      @hyr0llr  5 месяцев назад

      @@Wraith8162 it was not rattling. Just was making the whine.
      If you can pinpoint the noise to the pump then i would say yes on replacement.

  • @dadennis4696
    @dadennis4696 3 месяца назад

    What pump did you use and where did you get it ??

    • @hyr0llr
      @hyr0llr  3 месяца назад

      @@dadennis4696 i believe napa

  • @danielcito6729
    @danielcito6729 5 месяцев назад

    After driving for a few months does it still whine or pretty much like new? Feel any different on the wheel? I’m doing mine soon

    • @hyr0llr
      @hyr0llr  5 месяцев назад

      this is my buddies car , and he hasn't told me anything since it being replaced. So I would assume its all still good lol.

  • @zachgray118
    @zachgray118 4 месяца назад

    Thanks man I appreciate it!

  • @jacobmcclure4391
    @jacobmcclure4391 8 месяцев назад

    Bro my pressure line is so stuck how was yours so easy

    • @hyr0llr
      @hyr0llr  8 месяцев назад

      Try to the use the longest ratchet you have or breaker bar. Or even use the double wrench method.😊

    • @jacobmcclure4391
      @jacobmcclure4391 8 месяцев назад

      @@hyr0llrfor some reason my whole thing is spinning so I’ve gotta hold one side with a wrench then undo the bolt. Thanks!

  • @joseperiv
    @joseperiv 6 месяцев назад +2

    Sin limpiar🤦🏻‍♂️

    • @CarlosHernandez-cm5yx
      @CarlosHernandez-cm5yx Месяц назад

      “Without cleaning the reservoir” I agree doesn’t the diffuser/filter retain a lot of gunk?