WAGNER PowerPainter 90 Extra | Spray painting on bare plaster

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024

Комментарии • 13

  • @Tejvir
    @Tejvir 4 года назад

    Do you need to paint a mist cost when painting with the Wagner spray paint machine?

    • @WAGNERContractor
      @WAGNERContractor  3 года назад

      Hello than you for your question. When applying paint to bare plaster it is always advisable to apply a mist coat first.

  • @Bullsheet_Bob
    @Bullsheet_Bob 3 года назад

    Can you use water to clean it after use. Or do you need special cleaning liquid

    • @WAGNERContractor
      @WAGNERContractor  3 года назад +3

      Hello Mr X. What you clean the sprayer with will be determined by what you were spraying. Please follow the guidance for your material - whatever they suggest to dilute the material with is the same as you will use to clean the sprayer with. For example, water based products will only need to be cleaned out with water. Solvent based products will need to be cleaned with solvent cleaners. Thanks - The Wagner Professionals.

    • @Bullsheet_Bob
      @Bullsheet_Bob 3 года назад

      @@WAGNERContractor thanks.

  • @inkinen
    @inkinen 2 года назад

    Why is this sprayer recommended for interior jobs? I was planning to use it outside, mainly for water based exterior paints.

    • @wagnermarketing496
      @wagnermarketing496 2 года назад

      Hello If you are using water based exterior wood and metal paints this machine is suitable. You can also use Masonry paint but only use the smooth version not the textured type. Masonry paint is usually water based which make the paint easier to dilute and also easier to clean the machine afterwards. With Masonry paint we would recommend a 519 or a 619 tip. Kind Regards WAGNER Professionals

    • @inkinen
      @inkinen 2 года назад

      @@wagnermarketing496 Thanks for the reply! I will buy this machine then.

    • @WAGNERContractor
      @WAGNERContractor  9 месяцев назад

      👍

  • @turgutcoskun3228
    @turgutcoskun3228 3 месяца назад

    Nası sipariş verebilirim Aynı makinadan Alıcam bana yardımci olabilirmisiniz

    • @WAGNERContractor
      @WAGNERContractor  3 месяца назад

      Hi, for Turkey please contact FD GRUP MAKINA Boya INS. Özankara Sitesi, 1475 cadde No. 24 Ivedik OSB, 06378 Ankara, Türkei | Phone: 0312 287 41 01 | E-Mail: fduz@fd-grup.com

  • @josephkelly8189
    @josephkelly8189 3 года назад

    Would it be ok to work this from a generator

    • @WAGNERContractor
      @WAGNERContractor  3 года назад

      Hello Joseph, this is not something we would normally recommend - the PP90 is designed to run on standard domestic voltage and not outside of normal domestic conditions. Thanks - The Wagner Professionals.