How to Replace Driver Side Valve Cover 2005-2015 Nissan Xterra
HTML-код
- Опубликовано: 26 янв 2022
- Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ia/NSEVC00003
Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket. This video shows you how to install a new valve cover gasket in your 2005-2015 Nissan Xterra.
• Check here for more videos on the 2005-2015 Nissan Xterra: • Nissan Xterra 2005-201...
This process should be similar on the following vehicles:
2005 Nissan Xterra
2006 Nissan Xterra
2007 Nissan Xterra
2008 Nissan Xterra
2009 Nissan Xterra
2010 Nissan Xterra
2011 Nissan Xterra
2012 Nissan Xterra
2013 Nissan Xterra
2014 Nissan Xterra
2015 Nissan Xterra
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oci/1AXAA00013
• 13mm Wrench 1aau.to/oac/1AXAA00010
• 10mm Socket 1aau.to/obC/1AXAA00017
• 12mm Socket 1aau.to/ob4/1AXAA00015
• 8mm Socket 1aau.to/obC/1AXAA00017
• Trim Tool Set 1aau.to/oaq/1AXXX00006
• Hose Clamp Pliers 1aau.to/oj/1AXAA00076
• Locking Pliers 1aau.to/oA/1AXAA00139
• Needle nose pliers 1aau.to/oF/1AXAA00051
• Needle nose pliers 1aau.to/oF/1AXAA00052
• Straight Cutters
• Ratchet 1aau.to/ocx/1AXAA00016
• Torque Wrench 1aau.to/oa8/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oK/1AXSS00035
• Pick 1aau.to/oU/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Nissan Xterra 2005-2015 2nd Generation: • Nissan Xterra 2005-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Honestly keep dominating with you all’s videos you all are dominating for repair videos as far the variety of makes and models you work. So well shot so well explained
This has to be the first do-it-yourself video that I could sit through and watch without getting irritated. Thanks so much, and my God you're even using power tools.
I'd cover that Plenum opening with blue masking tape while working around it and removing the Valve Covers. This way I don't have much to worry debris or a nut/bolt going down in there.
Good step by step video, very helpful..
Thanks for sharing. 🤜🏻🤛🏻
+ELEVO Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
Just did this job and video helped allot
21 lb/ft for the bolts on this plastic upper intake manifold?? Has to be a mistake.
Nice vídeo. Thanks
No mention of torque specs, the correct order for doing the bolts on the valve cover...kind of important information, no?
He did tell the torque specs on the covers and the collector.
Does the red wire near the firewall happen to be for added heated mirrors?
What is the name of the solenoid that needs the gasket at 14:36?
Thanks
Would this be the same on a 2011 Nissan Frontier Pro 4X (6cilinder)?
If it's a VQ40DE engine it's all the same from 2005-2015.
My Haynes says 96 inch lbs on the plenum bolts.
TK Ticher
how tor eplace the valve cover gasket
step 1: break all plastic brackets
step 3: remove Helmholtz resonator
step 2: remove air filter box