GREAT VIDEO, SIR! You make it so easy to do. Now I am going to get a belt and I will try to do it myself, just like you showed it in this FANTASTIC video. Thank you very much.
Thank you! Thank you! Your video helped me so much! I’m a single women living in a tiny house. I watched your video, ordered the part, when it arrived I fixed it myself in 15 minutes.
@@janicepedrick1976 This one is easy, it's because you don't have a 90 degree angle on the drain hose. The drain hose needs to go up at a 90 degree from the machine (there should have been a zip strip holding it up that way) then down to drain. If you leave the hose down at the floor level there's no seal to stop gravity from pulling the water out. Think of it like a trap under your sink. It needs that curve to seal the water from moving.
@@Imnobodyk mines a single tub costway from Amazon it just today stard stalling during agitation I have to keep rearranging the clothes to get them untangled...so ...wtf ? I just unboxed it and installed it 2 days ago so it's brand new I've only used it the way you're supposed to
Thank you bro , you made me a very happy man , I bought this machine for my girlfriend 2 years ago , I bought it from a Colombian woman , kept telling girlfriend not to loaded up so much , so started to malfunction, so decided to watch repair vids , I found yours , it was a blessing for two reasons ……..I am so static , joyful , once I took the back plastic cover off to my surprise, I noticed I large ziplock plastic bag stashed inside with some sort of package wrapped on a cotton fabric , Lord behold !! After opening bag unwrapping whatever was in package we found $9 k dollars neatly wrapped in the dirty cotton cloth , so this was a very nice Christmas present , thank you , and thank Santa . Second we noticed the belt was kind of worn out . Gracias amigo , we are getting a new belt , and we will be donating part of this money to a shelter .
Fantastic video! I got one of these from a neighbor and I love it. Just wanted to do a bit of maintenance on it and this video empowers me to do it. Thank you for encouraging us to repair instead of trashing these goods 🌎
This is an awesome video; I have saved it to my "Home Repairs" folder. I've also been inspired to open the back of my new washer again, and note what kind of belt it uses. I've only used my washer four times, but there's a carpet of what looks like tiny bits of shredded belt underneath it. I'll be buying a replacement belt now in case supply chain issues make that impossible in a future time when the present belt finally fails.
Nice DIY tutorial, man! Your video helped me tremendously to fix my friend's washer that wasn't draining out the water. I wish all DIY tutorials were similar to yours.
Are replacement belts on portable washing machine all standard size? I have a 1.0 cu.ft. Farberware washing machine and can not find a replacement belt. Can you tell me where I might purchase one.
Thank you very much for the helpful video! Could you please send me the part number of the belt or the link to purchase it? Thanks in advance and have a good day!
Thank you so much for making this video! The machine I bought at the start of the pandemic has just crapped out on me. I definitely don't have the money to buy a new washer or to pay for a repair technician. I have the confidence to make the repairs now :)
Thank You for your video!! I've had the small washer for 7+yrs & today had to replace rubber hose. I'm going to change the belt, thanks to your informative video & description of other issues. Thanks again for making this!!!
This video is clear, to the point and relatable. Thank you! I bought mine second hand and had to immediately put it outside. It was riddled with mold but I needed it badly and went through allot of trouble to get it. After washing it several times with vinegar it was almost completely mold free. I learned that I needed to put a cup of vinegar in it to prevent mold from growing back. In short, keep your machine opened, aired and use vinegar to prevent mold from growing.
Great tutorial. I Needed a new draining hose and felt I could replace it myself. After taking the back off, my Haier washer,(smaller version), I saw that there was still some water left in the tub after washing a small load. This wasn't visible from looking inside the tub Didn't know how I would remedy this until i saw your video....the TUB...of course. I was thinking of buying plastic drop cloths, etc. hoping that that would be enough. Thank you for your view from the bottom of the machine. I now feel that I can complete this task myself. Thank you for your video.
@@Imnobodyk No i actually didnt, id planned on ordering the parts and changing them myself but i couldnt due to injury and decided it wasnt worth it if i had to pay someone else to do the work. I gave it to someone bc i didnt just want to throw it out.
What a champ. Thanks for the video, mate. I actually came on here as my machine (same Haier as yours) is making a loud buzzing noise when it drains. Likely the drainage pump but I'm also going to replace the belt as it's so simple to do. Extremely informative and perfectly presented. Cheers.
Hi, thanks for the video. I have a Magic Chef brand and hear a clicking sound when the washers changes direction clockwise and counter clock wise. This sound is very annoying and sounds like something is broken. Please let me know if you or some of your viewers know. Thank you in advance.
Hey great DIY video. I have two questions - (1) Can an extremely worn out belt also cause leaks? My washing machine (exact same make and model as yours) is leaking with no visible leaks from the hoses or pipes. After watching your video I opened and checked my machine and the belt was extremely loose and completely shredded with pieces stuck to the sides like soot. (2) where did you buy the belt from? I am unable to find it. Thanks.
This was a great video! Have a belt on order. My washer didn't come with wheels. It's hard to believe that a PORTABLE machine doesn't have wheels! LoL I bought a little cart for portable washing machines because I couldn't get casters on it! I decided to go ahead and replace the drain hose while I have the machine tilted into the bathtub (thanks for that tip too!) Because it's old and yucky! LoL Thank you so much for the video!
Hi there. My washer will spin but not agitate. From watching your videos, it looks like the shifter/actuator must be broken. It's juts a small Haier portable washer (HLPN21) and I've already fitted a new belt. Do you know how to fix/replace that part? It looks nothing like this one, unfortunately. Thank you.
My machine don't DRAIN the water. Can you do a video on how to fix that. I know you say it's easy but I would like to see a visual. I would appreciate it. Just got it from Craigslist for $5 bucks. My boyfriend but a new DRAINING HOSE. Now just need to know about the DRAINING pump. I have to put the hose in a bucket to drain out the water. Then dump it in the sink. Like 4x.. Very tiring.
Thank you so much for your video. Iam having a different problem! Apparently theirs a small spigot in the back of the drum that shoots water .u uploaded a short How can I fix that??
I loved your Video. My Hairer machine is making a clicking sound when I wash my clothes. I took the bk off but couldn't see anything. Can I turn it on it's front? Is there oil in there? Is it dangerous??? Pls help, thank you! ❤❤❤ I will wait for your reply!
Good quality video and narration. 1st thing I noticed about your fan belt is...... not to replace the belt yet as it's not that worn, but tighten the pulley so the belt is tighter, retighten the pulley nut. So....how do I "fix" the water level sensor? Is the water level sensor in any way synched to the agitation cycle? My water wouldn't turn off automatically and the agitator isn't working. I'm guessing my water level sensor.
Thanks man, that’s a great tutorial you have made. I’m thinking mine is the pump as it will only drain when the waste pipe is lower than the hole at the back…gravity only working.
thank you for sharing the video but the laundry I have is the same as you now it's not turning on it's off when it's washed so when I turn it on it didn't work for me is anyway you can help me
I'm on my second Haier HLP21N and I love it! The first was refurbished but worked fine until it didn't. It took some trial and error to realize it was a cracked lid. If the lid does not register as closed, it will fill with water but never pulse. Bought a new lid but the pin that holds it in was impossible, impossible, impossible to put back together! Got another one, used, because this has been discontinued. I'm surprised you bought a new one in 2020. It worked almost as well and I was super careful with the lid. But the plastic is very prone to cracking, and that's what it did! Oh no, here we go again, but at least now I knew the issue was the lid, not 100 other things. I superglued the cracked piece back on. But putting the lid on seemed to be impossible again, until I got it just right and now my machine is back working ... except it has developed a leak on the bottom. I will check your other videos and if you haven't fixed a similar problem, I hope you will consider it! I just subscribed. Thanks for the video, even though it wasn't the problem I had, I may just replace the belt anyway. Listen, everyone, be careful with your lid and don't store stuff on it!
Mine just stopped spinning this week for the first time and I got it back in June of 2020. It also started sparking near the bottom when it would start spinning. I hope just replacing the belt will fix mine.
Hey Virgil. Replacing the belt should work if you go under the machine and find the belt that is there now to be loose and floppy. I'm not sure about the sparks. Lol. Could be clothing jammed up in something. Good luck and Becareful!
Omg...you make it look so easy. Now my washer (moosoo mw45) when i start it up shows me E4, all it oes is beep but nothing will happen it wont fill , wont wash, wont do anything. Please help if possible...thank you beforehand.
Hey Alex. If you find water leaking from the bottom and there is no holes or structural damage to the drum then the drain pump and drain hoses need to be replaced. Thanks
So I hope you still look at this!!So E2. Well opened the back and pillowcase was in there. I started the machine over it worked and then E2!! I'm not sure what to do. My machine isn't that old but still please help!!
such a helpful video! Could you tell me What's the model of the belt and where you got it? You flipped it too fast, I can't even take a screenshot and take a closer look at it😅. Thank you!
I have the same washer from haier. The ground on the plug broke. I have the replacement plug with ground....i just dont know which color wire is the ground
i have an issue with same washer machine ..was working fine before ,but top lid piece broKE so i had to replace it with a new lid cover but now keeps filling up with water but wont stop ,,what seem to be the problem?
Thank you for this. I’m a 73 year old woman who likes to tackle my own repairs if at all possible. I’ve been looking for info on why there is water under the drum in my portable Avanti washing machine. There is a little plug in the back that will drain a tiny bit of water and collects some lint- and I found a dime in it once- but after I release the water there is still water sloshing around. It seems to drain fine when doing laundry- the clothes aren’t unduly wet and there is no water left in the drum- the hoses have water left in them though. I don’t know if that’s normal. Everything gets extremely tangled up though if you have a couple of pairs of jeans and long sleeve tops it’s one tangled mess- you have to unbraid it. Lol… so maybe something in the spinning is screwed up. Or the pump. Anyway, I thought I would have to take off the top and couldn’t figure out how- not to mentioned terrified I wouldn’t be able to get it back on properly. .. now I know I can take off the bottom and see what’s going on in there- though a flood of water might pour out. And I’m going to buy an extra belt just to have it around. Thanks again. You made a great video!
Ms. Ohmercy, you have inspired me to try and tackle this myself ( I am 65 yrs old ) got my machine in the bath tub, took the bottom off and removed the worn out belt. Unfortunately the manufacturer does not have the replacement belt. Any suggested places to look for it?
@@patriciapersonett2365 Not sure if you have the HLP21N machine but I would bet that you can replace that belt at any appliance parts store. Bring it with you if you can't find the part number in a manual or online.
6:05… Nobody is going to pay $300 to fix a machine they can get for $288 new (online only). A machine almost exactly like your Haier HLP21N (but it’s an HLP21E) is sitting right outside my apartment dumpster right now. I’m debating whether to pull it inside my unit and try to fix it, depending upon how the rest of this video goes. I appreciate your video very much, as the washer down our hallway has been broken down for a long time. And it doesn’t look like it’s ever going to get fixed.
The drain pump module ( I show it in this video) should be replaced. That tends to wear out too. It's plug out plug in module and should be easy to be replaced.
100,000 thumbs up! I inadvertently bought a machine from a woman who caring for a dying patient. The care giver put heavy fecal soiled linen into the machine over a period of time. She was not a clean person, and I am desperate to sterilize my pre- owned machine. Do you have any advice on how I can clean off the soil and buildup of scum located on the OUTSIDE of the tub, within the shell or cavity of the machine? Thank you for any help you can provide. Do I need to just get rid of the machine?
Hey donnamaco supermarkets sell machine cleaner liquids2 that you can use which sterilizes and cleans machines. You can also run a hot wash cycle with ammonia, bleach ( and vinegar) that will clean the machine out.
OK so I have the same washer and it's only been working on the lowest cycle. When I try to do the full cycle, it starts to fill and simultaneously drains water and then it stops and beeps three times. I replaced the belt (awesome and easy instructions!) and it's still doing this - any idea why?
Thanks for the video! I have the same washer and everything seems to work perfectly fine besides the spin setting. The machine washes and drains but once the water all drains it beeps 10 times and does not spin leaving my clothes very damp. Is this something a new belt would fix or do I need to fix the lid? I read a few posts about Haier and lid malfunctions. :(
I think that's what he's telling you. If your clothes are coming out damp he said that that may be the remedy. It's not spinning properly, needs a new belt.
Hi Olaf, I have this same model washer and I'm having an issue where water is flowing into the machine and coming right out the drain hose. It's not properly filling up the wash tub. Any thoughts on what could cause that?
lol thanks fillip to do what you advised, mine was different😚 butttt I did find that my drain hose was plugged with a dryer sheet….how right so clueless thanks
How do you get the drain hose to stay on the washer? I spent so much time trying to fix it and the drain pipe keeps falling off. Also the water inlet has a mesh thing in it so when i add the house to the washer inlet, i have water spraying. HELP Please
Hi Rose. Get a washer for the inlet hose. If it still leaks then use plumbers tape. If it still leaks after that then a new hose is needed. The inlet hoses are easy to break and need replacing after a couple of years anyway. As for the drain hose to me ot sounds like the connecting piece is broken. That can be replaced as well. Google for the parts. I found a lot of stuff on Amazon and local hard ware/plumbing stores sell generic universal hoses and connectors that can work.
Hi, I’m having the same problem with my washing machine, not spinning. Can’t find the drive belt on Amazon, that fits this model. Can you send model number,please.
I have a Giantex portable top loader, looks pretty similar to this unit. The drum is leaning to the left and bangs on the side during the spin cycle. Could it just be a worn out belt causing it to lean to the side like that? Where did you find the part# for your belt?
My wife purchased that same Giantex. Adjust the legs on the bottom first to stabilize the base. I had googled for the belt. Haier has a lot of parts for the brand. Giantex didn't seem to have a website for parts. In fact when you Google for Giantex parts the haier parts website comes up first. I would remove the belt and take it to a local plumbing supply store to see if the have a similar size belt.
I have just gotten one step closer to being the smartest man on Earth, Thanks
GREAT VIDEO, SIR! You make it so easy to do. Now I am going to get a belt and I will try to do it myself, just like you showed it in this FANTASTIC video. Thank you very much.
Thank you! Thank you! Your video helped me so much! I’m a single women living in a tiny house. I watched your video, ordered the part, when it arrived I fixed it myself in 15 minutes.
Hello sorry to bother you do you know where the I can purchase the belt
Hey cam you tell me why my mini washer drains the water while filling up for a wash load
@@janicepedrick1976 This one is easy, it's because you don't have a 90 degree angle on the drain hose. The drain hose needs to go up at a 90 degree from the machine (there should have been a zip strip holding it up that way) then down to drain. If you leave the hose down at the floor level there's no seal to stop gravity from pulling the water out. Think of it like a trap under your sink. It needs that curve to seal the water from moving.
@@Inolvidable_213 anyword as to what the name of hose is called and where to buy it?
@@Imnobodyk mines a single tub costway from Amazon it just today stard stalling during agitation I have to keep rearranging the clothes to get them untangled...so ...wtf ? I just unboxed it and installed it 2 days ago so it's brand new I've only used it the way you're supposed to
Which belt do I order? Can you please put the link or exact description of the belt you bought?
Thank you! This video gives me hope that I don't need to buy a whole new machine.
Thank you bro , you made me a very happy man , I bought this machine for my girlfriend 2 years ago , I bought it from a Colombian woman , kept telling girlfriend not to loaded up so much , so started to malfunction, so decided to watch repair vids , I found yours , it was a blessing for two reasons ……..I am so static , joyful , once I took the back plastic cover off to my surprise, I noticed I large ziplock plastic bag stashed inside with some sort of package wrapped on a cotton fabric , Lord behold !! After opening bag unwrapping whatever was in package we found $9 k dollars neatly wrapped in the dirty cotton cloth , so this was a very nice Christmas present , thank you , and thank Santa . Second we noticed the belt was kind of worn out .
Gracias amigo , we are getting a new belt , and we will be donating part of this money to a shelter .
😮
Thank you so much!! Bought this on marketplace used, seller didn't tell me it was broken, so you saved my purchase 😅😅 many thanks from a single mom!
Fantastic video! I got one of these from a neighbor and I love it. Just wanted to do a bit of maintenance on it and this video empowers me to do it. Thank you for encouraging us to repair instead of trashing these goods 🌎
This is an awesome video; I have saved it to my "Home Repairs" folder.
I've also been inspired to open the back of my new washer again, and note what kind of belt it uses. I've only used my washer four times, but there's a carpet of what looks like tiny bits of shredded belt underneath it. I'll be buying a replacement belt now in case supply chain issues make that impossible in a future time when the present belt finally fails.
Thank you for helping all of us . Bless you and yours
Great video! Thanks for sharing! What’s the part number for the belt??
Nice DIY tutorial, man! Your video helped me tremendously to fix my friend's washer that wasn't draining out the water. I wish all DIY tutorials were similar to yours.
Hi. Did you swapped the draining pump or the belt or both?
My husband is repairing our little Harry with the same symptoms. This is an excellent tutorial, thank you.
Are replacement belts on portable washing machine all standard size? I have a 1.0 cu.ft. Farberware washing machine and can not find a replacement belt. Can you tell me where I might purchase one.
Thank you very much for the helpful video! Could you please send me the part number of the belt or the link to purchase it? Thanks in advance and have a good day!
NEW V BELT for HAIER WD-0350-21 HLP021WM HLP20E HLP21E HLP21N HLP021 XQBM22C
Thank you so much for making this video! The machine I bought at the start of the pandemic has just crapped out on me. I definitely don't have the money to buy a new washer or to pay for a repair technician. I have the confidence to make the repairs now :)
Thank You for your video!! I've had the small washer for 7+yrs & today had to replace rubber hose. I'm going to change the belt, thanks to your informative video & description of other issues. Thanks again for making this!!!
This video is clear, to the point and relatable. Thank you!
I bought mine second hand and had to immediately put it outside. It was riddled with mold but I needed it badly and went through allot of trouble to get it. After washing it several times with vinegar it was almost completely mold free. I learned that I needed to put a cup of vinegar in it to prevent mold from growing back. In short, keep your machine opened, aired and use vinegar to prevent mold from growing.
Thanks a million; one of the best video's on the internet 👏👍🏼 You're saving people a lot of 💰
Wow thank u so much I'm a senior and on a fixed income .thank you so much.your a big help to me.
Great tutorial. I Needed a new draining hose and felt I could replace it myself. After taking the back off, my Haier washer,(smaller version), I saw that there was still some water left in the tub after washing a small load. This wasn't visible from looking inside the tub Didn't know how I would remedy this until i saw your video....the TUB...of course. I was thinking of buying plastic drop cloths, etc. hoping that that would be enough. Thank you for your view from the bottom of the machine. I now feel that I can complete this task myself. Thank you for your video.
Where did you get the tube from ?
Amazing tip with that socket wrench.
Trying to find a diagram for the unit to get to the lid sensor. You are the only person show any repair work at all. Appreciate your video.
Dude you’re a lifesaver. I was just about to order a new machine. I think I need a belt & a pump 🧐
Did you ever buy a belt and pump? Mines not draining, did yours start working?
@@Imnobodyk No i actually didnt, id planned on ordering the parts and changing them myself but i couldnt due to injury and decided it wasnt worth it if i had to pay someone else to do the work. I gave it to someone bc i didnt just want to throw it out.
What a champ. Thanks for the video, mate. I actually came on here as my machine (same Haier as yours) is making a loud buzzing noise when it drains. Likely the drainage pump but I'm also going to replace the belt as it's so simple to do. Extremely informative and perfectly presented. Cheers.
Can anybody tell me where to find a belt for this machine
Name : 0-408E replacement belt
Hi, thanks for the video. I have a Magic Chef brand and hear a clicking sound when the washers changes direction clockwise and counter clock wise. This sound is very annoying and sounds like something is broken. Please let me know if you or some of your viewers know. Thank you in advance.
Hey great DIY video. I have two questions - (1) Can an extremely worn out belt also cause leaks? My washing machine (exact same make and model as yours) is leaking with no visible leaks from the hoses or pipes. After watching your video I opened and checked my machine and the belt was extremely loose and completely shredded with pieces stuck to the sides like soot. (2) where did you buy the belt from? I am unable to find it. Thanks.
Thank you so much..Great video ♡
I have an exact same washing machine.
Where can I buy this belt??
Amazon type n O408E hlp21n it should come right up
Awesome video (albeit longer than necessary). The trick with the 13mm helped to put on the new belt. Thank you! 👍🏼
You are very welcomed 👍
Thank you .I was about to order new machine ,you saved me $$$$
Thank you 🙏
This was a great video! Have a belt on order. My washer didn't come with wheels. It's hard to believe that a PORTABLE machine doesn't have wheels! LoL I bought a little cart for portable washing machines because I couldn't get casters on it!
I decided to go ahead and replace the drain hose while I have the machine tilted into the bathtub (thanks for that tip too!) Because it's old and yucky! LoL
Thank you so much for the video!
Where’d you buy the belt
What size belt is it ?.. thanks
Thank you for your awesome video. I have a leak in the hose from the tub to the pump. Got some ideas from watching your video.
what size is that belt?
Where can I purchase the hose for this model
We have this washer. When in spin it really makes a banging noise. We have checked that it's not off balance but sounds like something banging. Thanks
Clear descriptions, great angles , wonder what else your channel has to offer. Awesome knowledge exchange
Thank you!!! Very help!! You speak clearly and well.
Any advice on how to do the drain pump! Please help! :-) I just ordered the pump but I dont know how to remove and replace it.
Where did you order it? Because I need one and no one can find one for me
Hi there. My washer will spin but not agitate. From watching your videos, it looks like the shifter/actuator must be broken. It's juts a small Haier portable washer (HLPN21) and I've already fitted a new belt. Do you know how to fix/replace that part? It looks nothing like this one, unfortunately. Thank you.
Where do I purchase the belt please????
My machine don't DRAIN the water. Can you do a video on how to fix that. I know you say it's easy but I would like to see a visual. I would appreciate it. Just got it from Craigslist for $5 bucks. My boyfriend but a new DRAINING HOSE. Now just need to know about the DRAINING pump. I have to put the hose in a bucket to drain out the water. Then dump it in the sink. Like 4x.. Very tiring.
Did you figure it out ?
Thank you so much your videos save me $ 300 dollars
Glad to help out Funnycotton!!! Happy New Years!
Thanks for the information, I do have the same exact washing machine, its been 4 years now going strong! Fingers crossed🤞🏼
Thank you so much for your video. Iam having a different problem! Apparently theirs a small spigot in the back of the drum that shoots water .u uploaded a short
How can I fix that??
Hi. Do you know how to disconnect the draining hose from the machine? What tools are needed? Please kindly advise. Thank you!
I loved your Video. My Hairer machine is making a clicking sound when I wash my clothes.
I took the bk off but couldn't see anything. Can I turn it on it's front?
Is there oil in there? Is it dangerous??? Pls help, thank you! ❤❤❤ I will wait for your reply!
OMG the video I needed! Now to take my broken machine out of storage and fix it!
Thanks!
Glad I can help. Go fix it my friend.
Good quality video and narration. 1st thing I noticed about your fan belt is...... not to replace the belt yet as it's not that worn, but tighten the pulley so the belt is tighter, retighten the pulley nut. So....how do I "fix" the water level sensor? Is the water level sensor in any way synched to the agitation cycle? My water wouldn't turn off automatically and the agitator isn't working. I'm guessing my water level sensor.
Thank you for this video, super easy to follow, going to tackle this tomorrow, you just saved me a WHOLE lot of $$$$!!!
Hi! How are you?
Can you tell us the # of the belt?
I try in ebay but is not giving me the right number
Thanks man, that’s a great tutorial you have made. I’m thinking mine is the pump as it will only drain when the waste pipe is lower than the hole at the back…gravity only working.
Does yours stop working completly because this my problem niw I don't know if I should belt ir pumb any I dea ?
Could you add a link to the belt??
thank you for sharing the video but the laundry I have is the same as you now it's not turning on it's off when it's washed so when I turn it on it didn't work for me is anyway you can help me
Thanks, I was able to fix my portable Panda washing machine. A penny was stuck in a pump.
Do you have anything on unclogging the drain pump?
I have a Comfee portable washer that's clicking loudly on the spin cycle. Any info on what that is? Is it worth trying to fix myself?
I'm on my second Haier HLP21N and I love it! The first was refurbished but worked fine until it didn't. It took some trial and error to realize it was a cracked lid. If the lid does not register as closed, it will fill with water but never pulse. Bought a new lid but the pin that holds it in was impossible, impossible, impossible to put back together! Got another one, used, because this has been discontinued. I'm surprised you bought a new one in 2020. It worked almost as well and I was super careful with the lid. But the plastic is very prone to cracking, and that's what it did! Oh no, here we go again, but at least now I knew the issue was the lid, not 100 other things. I superglued the cracked piece back on. But putting the lid on seemed to be impossible again, until I got it just right and now my machine is back working ... except it has developed a leak on the bottom. I will check your other videos and if you haven't fixed a similar problem, I hope you will consider it! I just subscribed. Thanks for the video, even though it wasn't the problem I had, I may just replace the belt anyway. Listen, everyone, be careful with your lid and don't store stuff on it!
How can I fix the agitator ? I need help can’t figure it out
Mine just stopped spinning this week for the first time and I got it back in June of 2020. It also started sparking near the bottom when it would start spinning. I hope just replacing the belt will fix mine.
Hey Virgil. Replacing the belt should work if you go under the machine and find the belt that is there now to be loose and floppy. I'm not sure about the sparks. Lol. Could be clothing jammed up in something. Good luck and Becareful!
My machine it was quite when is spinning but now is to laud Do you thing I have to replace it too!
Omg...you make it look so easy. Now my washer (moosoo mw45) when i start it up shows me E4, all it oes is beep but nothing will happen it wont fill , wont wash, wont do anything. Please help if possible...thank you beforehand.
Thank you! Extremely helpful and $$ savings. Have you experienced water leaking from the bottom?
Hey Alex. If you find water leaking from the bottom and there is no holes or structural damage to the drum then the drain pump and drain hoses need to be replaced. Thanks
So I hope you still look at this!!So E2. Well opened the back and pillowcase was in there. I started the machine over it worked and then E2!! I'm not sure what to do. My machine isn't that old but still please help!!
such a helpful video! Could you tell me What's the model of the belt and where you got it? You flipped it too fast, I can't even take a screenshot and take a closer look at it😅. Thank you!
Did you figure it out? He hadn’t replied to anyone who asked what kind of belt to get that I can see and I need to order one too!
Do you have a video on how to fix the water leaking? my washer doesn't keep the water in. Looks exactly like that one.
How do you change the bearing on that machine
thank you so much for this. I did exactly as you directed and yay! It works perfectly.
Do you know what to do if the machine doesn't stop filling?
I have the same washer from haier. The ground on the plug broke. I have the replacement plug with ground....i just dont know which color wire is the ground
i have an issue with same washer machine ..was working fine before ,but top lid piece broKE so i had to replace it with a new lid cover but now keeps filling up with water but wont stop ,,what seem to be the problem?
Hey from where u got the belt?
Thank you for this. I’m a 73 year old woman who likes to tackle my own repairs if at all possible.
I’ve been looking for info on why there is water under the drum in my portable Avanti washing machine. There is a little plug in the back that will drain a tiny bit of water and collects some lint- and I found a dime in it once- but after I release the water there is still water sloshing around.
It seems to drain fine when doing laundry- the clothes aren’t unduly wet and there is no water left in the drum- the hoses have water left in them though. I don’t know if that’s normal.
Everything gets extremely tangled up though if you have a couple of pairs of jeans and long sleeve tops it’s one tangled mess- you have to unbraid it. Lol… so maybe something in the spinning is screwed up. Or the pump.
Anyway, I thought I would have to take off the top and couldn’t figure out how- not to mentioned terrified I wouldn’t be able to get it back on properly. .. now I know I can take off the bottom and see what’s going on in there- though a flood of water might pour out.
And I’m going to buy an extra belt just to have it around.
Thanks again. You made a great video!
Ms. Ohmercy, you have inspired me to try and tackle this myself ( I am 65 yrs old ) got my machine in the bath tub, took the bottom off and removed the worn out belt. Unfortunately the manufacturer does not have the replacement belt. Any suggested places to look for it?
@@patriciapersonett2365 Not sure if you have the HLP21N machine but I would bet that you can replace that belt at any appliance parts store. Bring it with you if you can't find the part number in a manual or online.
6:05… Nobody is going to pay $300 to fix a machine they can get for $288 new (online only). A machine almost exactly like your Haier HLP21N (but it’s an HLP21E) is sitting right outside my apartment dumpster right now. I’m debating whether to pull it inside my unit and try to fix it, depending upon how the rest of this video goes. I appreciate your video very much, as the washer down our hallway has been broken down for a long time. And it doesn’t look like it’s ever going to get fixed.
Did you fix it?
if my belt is fine, if it is agitating, but not spinning out, any ideas what else it could be?
The drain pump module ( I show it in this video) should be replaced. That tends to wear out too. It's plug out plug in module and should be easy to be replaced.
100,000 thumbs up! I inadvertently bought a machine from a woman who caring for a dying patient. The care giver put heavy fecal soiled linen into the machine over a period of time. She was not a clean person, and I am desperate to sterilize my pre- owned machine. Do you have any advice on how I can clean off the soil and buildup of scum located on the OUTSIDE of the tub, within the shell or cavity of the machine? Thank you for any help you can provide. Do I need to just get rid of the machine?
Hey donnamaco supermarkets sell machine cleaner liquids2 that you can use which sterilizes and cleans machines. You can also run a hot wash cycle with ammonia, bleach ( and vinegar) that will clean the machine out.
Do you know what the fix would be when your portable washer is too loud? like it feels like tis dragging on to something
Hi there hope everything is good I have a magic chef washer and in the normal cycle washes but doesn’t rinse any idea what the problem could be Thanks
OK so I have the same washer and it's only been working on the lowest cycle. When I try to do the full cycle, it starts to fill and simultaneously drains water and then it stops and beeps three times. I replaced the belt (awesome and easy instructions!) and it's still doing this - any idea why?
Hello. What's the belt #. Also can you have a video on how to change the hose . Thanks
Google the serial number on your machine for the correct parts
Thanks for the video! I have the same washer and everything seems to work perfectly fine besides the spin setting. The machine washes and drains but once the water all drains it beeps 10 times and does not spin leaving my clothes very damp. Is this something a new belt would fix or do I need to fix the lid? I read a few posts about Haier and lid malfunctions. :(
I think that's what he's telling you. If your clothes are coming out damp he said that that may be the remedy. It's not spinning properly, needs a new belt.
I have the same exact washer but my haier washer wont hold water...what could I do?
Hi, need your help please. My portable washing machine doesn't spin during wash cycle. But it works fine on spin cycle.
How do you do a master reset on a Haier?
Do you know why my machine is not pumping out water? Can you teach me how to replace it? Thank you!
Hi Olaf, I have this same model washer and I'm having an issue where water is flowing into the machine and coming right out the drain hose. It's not properly filling up the wash tub. Any thoughts on what could cause that?
What kind of belt model is it?
My machine do no start can you recommend something
What is the part number for the belt please ?
Great video. Where did you buy that belt?
Amazon sells them but I got mine from a plumbing supplier selling thru eBay
@@olaf2046 what size was the belt?
Hi help!! My black and decker port washer does not stop, keeps filling with water! What is wrong with it?!
What would you call when it’s leaking from the bottom, since first use
Hi. It would be the pump. Replace the pump and also check for structural damage like a crack or hole.
lol thanks fillip to do what you advised, mine was different😚 butttt I did find that my drain hose was plugged with a dryer sheet….how right so clueless thanks
what about if the dial doesn't work unless you move it your self?
How do you get the drain hose to stay on the washer? I spent so much time trying to fix it and the drain pipe keeps falling off. Also the water inlet has a mesh thing in it so when i add the house to the washer inlet, i have water spraying. HELP Please
Hi Rose. Get a washer for the inlet hose. If it still leaks then use plumbers tape. If it still leaks after that then a new hose is needed. The inlet hoses are easy to break and need replacing after a couple of years anyway. As for the drain hose to me ot sounds like the connecting piece is broken. That can be replaced as well. Google for the parts. I found a lot of stuff on Amazon and local hard ware/plumbing stores sell generic universal hoses and connectors that can work.
Hi,
How to fix drain pump.my machine start leaking from drain pump.what do I need to do?I have mediam size Haier portable washing machine.
Thanks for this information and instructional video
Hi, I’m having the same problem with my washing machine, not spinning. Can’t find the drive belt on Amazon, that fits this model. Can you send model number,please.
I have a Giantex portable top loader, looks pretty similar to this unit. The drum is leaning to the left and bangs on the side during the spin cycle. Could it just be a worn out belt causing it to lean to the side like that? Where did you find the part# for your belt?
My wife purchased that same Giantex. Adjust the legs on the bottom first to stabilize the base. I had googled for the belt. Haier has a lot of parts for the brand. Giantex didn't seem to have a website for parts. In fact when you Google for Giantex parts the haier parts website comes up first. I would remove the belt and take it to a local plumbing supply store to see if the have a similar size belt.
Mine is doing the same. Did you figure out the issue?