Beth, I could not have done any of my mods without your tutorials! Watching SlingMods is great but being a woman, you're much easier to follow. THANK YOU!
This was a pretty simple install. Thanks for posting, cause my parts matched your video, but not the parts in the slingmods video. You helped me avoid some confusion.
Finally got them and I installed it, although I removed the left fender because I wanted the wire to be tied together with the other wires since I couldn't reach them. By the way in my kit they had a foot of black wire at the front and instead of Primer Sticks they had Primer Wipes, so make sure if anybody is doing this to look for those if you don't see the sticks don't panic like I did. :) Also I had only 3 extensions and then the 2 splitter, so don't panic about not having 4 extensions because it will work depending on what kit they ship. Thanks for the black tape tip, mine also had a tiny wire color showing. I love the lights, bright as I was expecting. and this was a rehearsal for the LED Front Fenders Reflector kit and Red Marker Brake light install. Thank you again Ryker Rydes.
You know, I was on the fence about these at first, because I'm not mechanically inclined and hooking up lights was a little intimidating to me. Weird, right? All of your installs are detailed and they give me confidence that I can do these too! They're definitely going to be my next mod purchase! Thank you for being such a Rock Star to the Ryker community. In my videos, I call you " The Legendary Ryker Rydes", and it fits! You're the best, Beth!!!!
Thank you soooooo much! Your kind words mean so much. Sometimes, when I feel burnt out, I read something like this and it motivates me to continue! Much love! ❤️
I like that "TRON" bike look. I watched many of your videos and keep watching more.thanks for putting them out there for us newbies to learn about the bike.
I installed these today on my tryke. The wires attached to the led strips were much longer than the ones that you got, so I had no issues there, luckily. I did do one thing a bit differently. I started at the top and connected the splitter and tested both my leds before attaching them. Everything went well. Your video certainly helped me cruise through the installation. Thanks again.
Thanks for the video, I was able to install them today...took me a couple of hours but your informative video in the garage with me was right on time!! They look great too!!
Thank you for your video, i put those on tonight, and they look awesome, thanks to your video, it took me only 30 min, but i watched the video 10 times!! Lol
Thanks for the video, it helped me out immensely even though my kit only came with 3 wires of various length. The cables on the light strips themselves are much longer now so I guess that makes up for it.
So I watched your video and orderd the same Fender lights from sling mods for my wife Ryker. Crazy I have 3 cords one is 47 in when it's 36 in and one is 34 in Long I'm going to have a lot of wires to so tied up afterwards thanks for the video it helped a lot
I love my 2019 Riker ride it out here on Long Island New York. Out on the end of Long Island beaches & roads are beautiful can’t wait for the spring to ride again✨👩🏻🚀🤙🏻🌈☀️🌸✨
Hey Mike! The video on Slingmods is off and doesn't match the parts correctly. I already spoke to them about it and they are working on a new one. I hope my video helps you out. Sadly, summer in Florida, which is a grueling 6 months, it is way to hot to ride. At least for me, I ride in jeans, motorcycle jacket, gloves and a helmet. At 114 degrees it's horrible! But, in the winter....that's my riding season!
Hey Tom, I know, I felt so silly with that mistake! I was going to cut that part, but figured I'd leave it in to show others what not to do! lol Stay tuned!
Thanks Wendy! Just added the link! But here it is so you don’t have to look for it. www.slingmods.com/canam-ryker-front-fender-led-running-light-strips-tricfenderz?vehicle=4
They look fantastic! 👌🏻 I love how much enjoyment you get from the customisation jobs you’re doing and how you’re not afraid to give it a try. That enthusiasm is gonna inspire others to personalise their Ryker and I personally think that is a big part of the fun of owning these awesome machines. Namaste 🙏🏻 P..S. It’s awesome that you refer to her as your baby. 😁
Hi!! Yes I absolutely love doing the modifications, so fun. I hope I can inspire at least one person to try and do it themselves. I want to start recording some Florida rides too. Start making videos like YOU! Namaste!
Ryker Rydes I think the hardest thing for me is knowing what to say. I put my crash helmet on and as soon as Ripley turns a wheel my mind goes completely blank lol. Seriously though, it’s fun and challenging and It’s great being able to look back on ryde outs. You’ll love it. 👍🏻 P.S. I think that your videos are brilliant and will already be inspiring lots of people.
@@TheBorderRyker Yeah I can imagine it being challenging trying to figure out what to say. You live in such a cool remote part of the world, that many of your viewers have never been. So just talking about your culture, things going on in your unique area are all fascinating to us. It may sound boring to you, but we love it. My favorite vids of yours are your rides in the city and country roads. Nice blend of the two. Just my thoughts! lol
Ryker Rydes yeah, it’s easy to forget that other people don’t see the same stuff every day. Thank You, or as we say in Gàidhlig, Tapadh Leibh. Ryde Safe. Namaste 🙏🏻
Great video Beth... I did a install of these on my RUclips channel.. I had no idea they would be so bright... They are almost a nuisance when you are riding down the freeway at night however they do look amazing...
Hey Bill, I just watched your youtube tutorial on this. It's weird, slingmods changed manufactures on this product. Your wiring is different than mine. Your vid matches slingmods, but mine is for the new wiring (comes with shorter wires off of the light strips). The original design was much better!
@@RykerRydes hey no worries young lady... I wish there was more people out there like you and myself doing these videos.. we can both do the same video over and over again and all we are doing is helping out the community...
@@RykerRydes they have already sent me the reflector kit both upper and lower reflectors that are going to be LED lights .. I just haven't filmed the video footage of it yet.... They want me to do a video taking the wheels off and doing it that way.... They said the wiring will be much easier with the wheel off...
To the lady of Ryker Rides, I've watched you try to fish a wire harness thru a tight fitting area too small for hands. Well what I do is get a 10in piece of coat hanger and some electrical tape that I purchased at Harbor Freight store (10 roll package for a few bucks) wrap the tape tightly around the 2 wires and, walla whadda ya no,, it's easier on the fingers?
That makes me sad! How can making your motorcycle more visible (less accidents) be illegal? How are you doing with the fires? I hope you and your family are safe. So glad you got the much needed rain!!
Another great video! Thank you for sharing! Because these are so bright at night does this cause a distraction for you while driving for a long period of time?
That’s a great question. When I first put them on, I thought they were way too bright and wished I could have but a dimmer switch on it. But now I love it and can’t imagine not having it. They are crazy bright, especially at night, but I want distracted drivers to see me. Short answer: no they don’t distract me over a long period of time. But most of my long rides are during the day. Not sure if that helped! 🤪
Great video !! I also saw the video on the back rest. The back rest looks great ! How well does it work ?? The price is very high i figured $100.00 but they are $200.00 on Amazon. Cheryl M. Ca.
Hi Cheryl!! Thanks so much for watching!! The backrest is my absolute, cannot ride without, add on. Whenever I used to ride, I got lower back fatigue. Now it’s perfect! If you buy it from Amazon, you can always return it if you don’t love it!
Another awesome video! You are one of people that made me decide to get a Ryker. I’ve had my Rally now for about a week and a half and I love it! Keep up the great work. P.S. where did you get the Can Am fender stickers from?
Yes I do! I is my favorite add on! Super bright. They have been great in the rain! I have had to glue the wire in the wheel well so it didn't hang down.. That was the only "fix" I've had to do.
I have a really crazy question. Would there be any way to mount these fender lights and then plug them into the wiring for the pre-existing lights that are on the fender?
Much nicer to watch a video with a woman doing the work pretty hair glasses on the head finger nails painted toenails very relaxing to watch someone else work especially a woman✨🤓✌🏻&❣️✨
SlingMod did the same thing to me. They sent me something different than what the install video showed. Only in my case, it did not work. Because I waited a few months to install it, they said they would not replace it.
Jack,, Thank you so much for watching! I’m sorry you had issues. If you call Slingmods now, just asked for an extension wire, a 12 inch one would work perfectly! Slingmods definitely needs to redo their video! I hope my video helps people get a clearer idea of how to install it.
@@RykerRydes Thanks for the advice. My LED's from Slingmod/TricLED was not for the Ryker fenders. It was another kit for the 'Knight Rider' strobe. They showed the install with LEDs on a flexible strip, like your install, but they sent me the ones on a PCB. When I bent it around the nose (as they showed), the PCB broke. They refused to send me the correct one because I waited too long to install it ("Out of Warranty"). Just a heads up with dealing with the two companies. Ryde Safe. -Jack
@@-jackinspokane6648 Wow, that is disappointing to hear. Slingmods was so great with sending me out an extra piece. They even threw in a nice t shirt. I tend to buy a lot from Amazon, their returns are so easy.
Hi really enjoy your channel. Please keep doing how to video. I live in Miami Florida. The riding around it is great if you are talking at the same time about future mod to your ryker. Very impress by you detailed explanation on the video. My question is have you had issue with the wheel coming off like a few people have had??
Hey Felix! Not sure what you mean by the wheel coming off?? Thanks sounds terrifying! I have never had any problems. I did take my bike in for a wheel nut recall, is that what you are referring too?
I bought these light because of you an its a very simple plug & play. They're my favorite feature so far, but im debating on the front an rear A-arm lights/turn signals. But how do you get your wires not to rub?
Hi Chulo! Which wires rubbing are you referring to? 🤔 I am usually much quicker at replying!!! Been crazy busy building my new website: www.RykerRydes.com check it out.
Did you purchase the brake flasher from Slingmods? They should both work at the same time with a splitter. But the fender lights will not flash like the the brake light (I wish it did)
@@RykerRydes Yes I purchased the lights from Slingmods, I was told I didn't need a splitter the wires could "piggyback" on each other, I'll let you how it turns out.
Do you find them to be blinding at night? Particularly the red facing the driver. I really like these, but don't want to be preoccupied with the red if it's so bright it is annoying at night. Also, do you ever wear shoes? lol
First off, NO, I never wear shoes (or at least I try not to) unless I am on my bike! Ok, as far as the fender lights, yup they are crazy bright, but I don't really mind. Being seen is so important on these bikes. You can always buy those yellow nighttime glasses it they bother you at first?
@@RykerRydes Sounds good. I'm debating between stuff like this, or just getting a set of underflow type lights that would be whatever color while riding and turn red when the brake is applied. But love your videos...now if only I could win the lottery to do all these things!
Hello! Thank you for the videos! I just received my 2019 Ryker Rally yesterday and have learned so much about it with your videos. I feel more confident approaching modifications on it with your help :) I'd like to do this mod, but I'm curious to know if these lights also work with the turn signal?
Welcome to the family!!! Congratulations 🎊 No, sadly, these lights do not work with the turn signals. But I believe that Slingmods does sell replacement reflectors that blink with when using your signals.
Thank you for sharing the videos that you do. You and Bill both are awesome for helping people in the Ryker world. Two questions... One, do you find the lights bothersome riding at night or being more of a hindrance trying to see? Question 2, I noticed your Can-Am logos on your air intake and on your front fenders... Are they reflective and where did you get them?
Hi Dave! Thanks for your comment and for watching. Funny Bill and I have become friends through this. He is a great guy and has really helped me out a lot. As for your questions: #1 Not the lights are not a hinderance. At first they seemed way too bright and wanted to find a dimmer switch, but now, I can't imagine the bike with out it. I am all about making sure distracted drivers see me! #2 The replacement logos on the air intakes are aftermarket, iridescent, stickers. Not reflective. The ones on top of the fenders are the original logo stickers that came on the air intakes. I just relocated them. If you check out ETSY, there are tons of people that will make custom REFLECTIVE stickers for you. I am getting one made that says Ryker Rydes with the youtube logo. Have an awesome day!
@@RykerRydes hahahaha. true! I am currently in the process of making a matching trunk bag to go with mine. lol. keep those videos coming . I think I will start a savings account titled Ryker accessories:-)
i was contemplating getting the LED light set you purchased vs the the reflectors. This is a @Ryker Rydes much better cost effective purchase. Are you also stating there are additional parts you needed (wire wise) that Should have been included or that you need to buy?
I was not short on wires. The current Slingmod’s video has slightly different wiring vs what they sent out. I got nervous and had them mail me an extra 12” piece (free) but never ended up needing it. Ps thanks for watching!!
The lights are a simple plug and play design. It does not have an on/off switch. I suppose if you where mechanical you could add a toggle switch. Ps sorry for my delayed response, I am still on my bike trip.
Hello, based on your experience with these motorcycles, can you help me with this question, a new agency Ryker motorcycle when it has its first oil change, for your attention to my question, thank you.
Yes they are on anytime your bike is on. It does not come with the ability to turn them off. I do wish they worked with the blinkers but have not found a way to do that!
Hi! Thanks for watching! Slingmods sells an expansion kit that would work. www.slingmods.com/canam-ryker-front-fender-led-running-light-strips-tricfenderz?vehicle=4
Hi Trey! I can only speak from my experience, and my Ryker has NEVER been in the shop! There was a wheel nut recall but that took 5 minutes. I am in a Ryker riding group and no one has ever mentioned any problems. If you buy new, it is under warranty, so no stress!
i have had mine since July/2019 and have not had it in the shop for any mechanical issues. They could be saying that because Can-Am wants you to do the first maintenance after 500 miles. And they could be in the shop because the owners don't do there on modifications. lol
Don’t those hurt your eyes when riding at night? I feel like you would have a lot of light pollution while riding at night. Maybe even glare on your helmet face shield. 🤷🏼♂️
"Everything is simple until you're actually doing it." The story of any repair or upgrade job I've ever done. Another great video.
So funny!! Thanks for watching!!!
instablaster
Beth, I could not have done any of my mods without your tutorials! Watching SlingMods is great but being a woman, you're much easier to follow. THANK YOU!
Anne, thank you for taking the time to share this with me!! Happy to help! Ride safe my wind sister.
This was a pretty simple install. Thanks for posting, cause my parts matched your video, but not the parts in the slingmods video. You helped me avoid some confusion.
Glad it helped! My pleasure!
They look Awesome Beth ... Love em, another great tutorial! 👍😁🤘 Beanie
Thanks Beanie!
Hey Ryder - very good video and I appreciate your candid comments of the products you install and critique. Video on.
Thanks! Will do! Thanks for your kind words!
Mine just came in the mail yesterday. I'm going to go install them this evening. Your video helped me alot. Thanks!!
Glad I could help. You will love these!!
Finally got them and I installed it, although I removed the left fender because I wanted the wire to be tied together with the other wires since I couldn't reach them. By the way in my kit they had a foot of black wire at the front and instead of Primer Sticks they had Primer Wipes, so make sure if anybody is doing this to look for those if you don't see the sticks don't panic like I did. :) Also I had only 3 extensions and then the 2 splitter, so don't panic about not having 4 extensions because it will work depending on what kit they ship. Thanks for the black tape tip, mine also had a tiny wire color showing. I love the lights, bright as I was expecting. and this was a rehearsal for the LED Front Fenders Reflector kit and Red Marker Brake light install. Thank you again Ryker Rydes.
My absolute pleasure! It seems like sling mods changed their wiring a little bit. Thank you for giving everyone a heads up!
As I have only just started to watch I will comment for future projects. Use wire coat hanger wire to poke through to hook your bendy wires.
Good tip, thanks Moto!
You know, I was on the fence about these at first, because I'm not mechanically inclined and hooking up lights was a little intimidating to me. Weird, right? All of your installs are detailed and they give me confidence that I can do these too! They're definitely going to be my next mod purchase! Thank you for being such a Rock Star to the Ryker community. In my videos, I call you " The Legendary Ryker Rydes", and it fits! You're the best, Beth!!!!
Thank you soooooo much! Your kind words mean so much. Sometimes, when I feel burnt out, I read something like this and it motivates me to continue! Much love! ❤️
@@RykerRydes, trust me, you're very well loved and respected in the Ryker community, and we are truly grateful for your commitment and expertise.
Those lights look really nice and plenty bright too. Very nice addition to the machine.
Thanks Max. I love anything that makes the bike safer.
@@RykerRydes if all goes well I will have the 900 this week and am going to put the same lights on mine after seeing yours.they look really awsome.
@@maxmcneeley74 check out my website for more lighting ideas: www.RykerRydes.com
I like that "TRON" bike look. I watched many of your videos and keep watching more.thanks for putting them out there for us newbies to learn about the bike.
I ordered these and the lights under the seat tonight. You can bet I have saved your video to help me when I get them in!
Thanks Heather!! You are awesome!
I installed these today on my tryke. The wires attached to the led strips were much longer than the ones that you got, so I had no issues there, luckily.
I did do one thing a bit differently. I started at the top and connected the splitter and tested both my leds before attaching them.
Everything went well. Your video certainly helped me cruise through the installation. Thanks again.
Thanks so much! So happy it helped!!!
At work Beth ... Will watch when I get time, can't wait! 👍😁🤘 Beanie
wow that was awesome , keep those videos coming Beth ! :)
Thanks so much. I really appreciate it!!
Thanks for the video, I was able to install them today...took me a couple of hours but your informative video in the garage with me was right on time!! They look great too!!
Andrea Williams you will love how noticeable you are to others on the road. Best investment!!! Well done!!
Thank you for your knowledge and experience with the Ryker .
Great videos
I really appreciate that Shelia! Thanks for watching!
Thank you for your video, i put those on tonight, and they look awesome, thanks to your video, it took me only 30 min, but i watched the video 10 times!! Lol
Looks great but I would suggest some electrical freeze on those connections. Great job, thanks for posting they look awesome!!!!👍🏻
Great suggestion!
I loved this video! My wife can't wait we get these on the bike! Thank you so much.
Warning: THEY ARE BRIGHT! But it does it's job and people take notice!
@@RykerRydes We got them let's see how cool they are.
Thanks for the video, it helped me out immensely even though my kit only came with 3 wires of various length. The cables on the light strips themselves are much longer now so I guess that makes up for it.
Glad it helped. Thanks for watching!
Thank you so much for your instructional videos. This helped me our so much to add my fender light.
My absolute pleasure! Thank you for watching!
So I watched your video and orderd the same Fender lights from sling mods for my wife Ryker. Crazy I have 3 cords one is 47 in when it's 36 in and one is 34 in Long I'm going to have a lot of wires to so tied up afterwards thanks for the video it helped a lot
My absolute pleasure!!
I love my 2019 Riker ride it out here on Long Island New York. Out on the end of Long Island beaches & roads are beautiful can’t wait for the spring to ride again✨👩🏻🚀🤙🏻🌈☀️🌸✨
❤️❤️❤️❤️awesome ❤️❤️❤️❤️❤️
Very well done , they look really nice. I can't wait to buy a right or rally 🙏😊
Thank you! 👍 Appreciate you watching.
Great video. I've got these lights, but haven't put them on yet. I'll probably do it on Saturday.
Gotta love Florida, every season is riding season.
Hey Mike! The video on Slingmods is off and doesn't match the parts correctly. I already spoke to them about it and they are working on a new one. I hope my video helps you out. Sadly, summer in Florida, which is a grueling 6 months, it is way to hot to ride. At least for me, I ride in jeans, motorcycle jacket, gloves and a helmet. At 114 degrees it's horrible! But, in the winter....that's my riding season!
@@RykerRydes yea, hotter when your waiting for the light to turn! hahahaha
@@giovannam925 The worst!!!
@@RykerRydes I'm in Clearwater/St. Petersburg and wear the gear year-round as well.
@@mikeyuberalles I am always looking for a light weight 100% mesh jacket with pads in it. The search continues.
Damn!!!!! That’s bright. Love it
Be seen!!!!
Your in Florida and your trying
to fish Up . Haven't figured out
yet most lines go down. We love
You. Yeah what's next?
Hey Tom, I know, I felt so silly with that mistake! I was going to cut that part, but figured I'd leave it in to show others what not to do! lol Stay tuned!
Santa's sleigh going down the road!!
lol
Nice! I got these for Xmas, but being Colorado.......I'll need to wait until Spring (or whenever it gets to be 70 degrees) to install them.
You’ll love them! Huge difference!!! Thanks for watching!!
@@RykerRydes Wow! They are BRIGHT! Awesome! Thanks for the informative vid. Like it better than SlingMods. They look outstanding!
@@midliferyker3929 Thanks mate for checking up on me ... I really appreciate it! 👍😁🤘 Beanie
BeanieBoyMoto Cheers!
TRON Ryker. Looks nice and bright!
lol! Thanks for watching ! Stay safe!
Beth, great installation!
Thanks so much!!
Colorado here, Great How To video, you Rock 100% keep you the good work....
Thanks Mario/Colorado!!!! I appreciate you watching!!
Those lights look great! Looked for link, didn’t find it.
I admire for persistence and your sense of adventure to do your own installs.
What’s next?
Thanks Wendy! Just added the link!
But here it is so you don’t have to look for it.
www.slingmods.com/canam-ryker-front-fender-led-running-light-strips-tricfenderz?vehicle=4
They look fantastic! 👌🏻 I love how much enjoyment you get from the customisation jobs you’re doing and how you’re not afraid to give it a try. That enthusiasm is gonna inspire others to personalise their Ryker and I personally think that is a big part of the fun of owning these awesome machines. Namaste 🙏🏻
P..S. It’s awesome that you refer to her as your baby. 😁
Hi!! Yes I absolutely love doing the modifications, so fun. I hope I can inspire at least one person to try and do it themselves. I want to start recording some Florida rides too. Start making videos like YOU! Namaste!
Ryker Rydes I think the hardest thing for me is knowing what to say. I put my crash helmet on and as soon as Ripley turns a wheel my mind goes completely blank lol. Seriously though, it’s fun and challenging and It’s great being able to look back on ryde outs. You’ll love it. 👍🏻
P.S. I think that your videos are brilliant and will already be inspiring lots of people.
@@TheBorderRyker Yeah I can imagine it being challenging trying to figure out what to say. You live in such a cool remote part of the world, that many of your viewers have never been. So just talking about your culture, things going on in your unique area are all fascinating to us. It may sound boring to you, but we love it. My favorite vids of yours are your rides in the city and country roads. Nice blend of the two. Just my thoughts! lol
Ryker Rydes yeah, it’s easy to forget that other people don’t see the same stuff every day. Thank You, or as we say in Gàidhlig, Tapadh Leibh. Ryde Safe. Namaste 🙏🏻
Looks perfect! But, can they be mistaken for brake lights as bright as they seem to be?
That’s interesting. I don’t think so, but even if people did mistake them for brake lights...it would mean they’d back off. Win win!!
Wow, those are bright!👍🏻👍🏻👍🏻👍🏻 Looks great Beth, wish they made them for my F3, oh wait.........I don’t have an F3 yet!! Drats!!!🤬🤬🤬😡😡😡
lol.You're so funny!
Nice touch.
Thanks!
Great video Beth... I did a install of these on my RUclips channel.. I had no idea they would be so bright... They are almost a nuisance when you are riding down the freeway at night however they do look amazing...
Hey Bill! I’m sorry, I had no idea you did a video on this already. Definitely not trying to step on your toes.
Hey Bill, I just watched your youtube tutorial on this. It's weird, slingmods changed manufactures on this product. Your wiring is different than mine. Your vid matches slingmods, but mine is for the new wiring (comes with shorter wires off of the light strips). The original design was much better!
@@RykerRydes hey no worries young lady... I wish there was more people out there like you and myself doing these videos.. we can both do the same video over and over again and all we are doing is helping out the community...
@@RykerRydes yes I agree they should not have changed the wiring... I believe they did that to provide a easier install...
@@RykerRydes they have already sent me the reflector kit both upper and lower reflectors that are going to be LED lights .. I just haven't filmed the video footage of it yet.... They want me to do a video taking the wheels off and doing it that way.... They said the wiring will be much easier with the wheel off...
Very cool they look great. Keep the rubber down
Thanks Larz, you too!
To the lady of Ryker Rides, I've watched you try to fish a wire harness thru a tight fitting area too small for hands. Well what I do is get a 10in piece of coat hanger and some electrical tape that I purchased at Harbor Freight store (10 roll package for a few bucks) wrap the tape tightly around the 2 wires and, walla whadda ya no,, it's easier on the fingers?
GREAT TIP! Thanks Robert!
Great video. I really like those lights.
Thanks so much!
They look great. Can't wait till I get mine.
Lmk if you have any install questions
Looks awesome Beth, love it but unfortunately illegal in Australia
That makes me sad! How can making your motorcycle more visible (less accidents) be illegal? How are you doing with the fires? I hope you and your family are safe. So glad you got the much needed rain!!
Love your bike.
Thank you so much!!!
Another great video! Thank you for sharing! Because these are so bright at night does this cause a distraction for you while driving for a long period of time?
That’s a great question. When I first put them on, I thought they were way too bright and wished I could have but a dimmer switch on it. But now I love it and can’t imagine not having it. They are crazy bright, especially at night, but I want distracted drivers to see me. Short answer: no they don’t distract me over a long period of time. But most of my long rides are during the day. Not sure if that helped! 🤪
Great video !! I also saw the video on the back rest. The back rest looks great ! How well does it work ?? The price is very high i figured $100.00 but they are $200.00 on Amazon.
Cheryl M. Ca.
Hi Cheryl!! Thanks so much for watching!! The backrest is my absolute, cannot ride without, add on. Whenever I used to ride, I got lower back fatigue. Now it’s perfect! If you buy it from Amazon, you can always return it if you don’t love it!
They look great super bright
Thanks for watching!!
Thanks for video, however I would not throw on the floor the LEDs, it would damage the LEDs.
Good tip. Thanks for watching.
Hi Beth, did/do you find the lights are too bright for your eyes when you are riding at night?
I get asked that a lot! They are not too bright! They are my favorite accessory! It’s all about being seen!
Another awesome video! You are one of people that made me decide to get a Ryker. I’ve had my Rally now for about a week and a half and I love it!
Keep up the great work.
P.S. where did you get the Can Am fender stickers from?
Thank you so much!!! Welcome to the family!! Contact Mark Zim on FB. He does great decals Tell him I sent you. 😀
good work looks real good and very bright
Thank Dale!! I appreciate you watching!!
that ok i would be watching your videos is i didn’t find theam internet very interesting thank you
I like those lights. However I am wondering if they bother your night vision since they are somewhat shining in the riders face ?
It did take a little getting used to, now I can not imagine riding without them! I just want to be seen!!
Hello! Do you still like the lights? Have they done well with rain? Thank you!!
Yes I do! I is my favorite add on! Super bright. They have been great in the rain! I have had to glue the wire in the wheel well so it didn't hang down.. That was the only "fix" I've had to do.
Wow...great job.....Wow!
Thank you so much!!
I have a really crazy question. Would there be any way to mount these fender lights and then plug them into the wiring for the pre-existing lights that are on the fender?
Interesting. You may be able to use a splitter or a jump wire. Are you trying to get them to work with your blinkers
Much nicer to watch a video with a woman doing the work pretty hair glasses on the head finger nails painted toenails very relaxing to watch someone else work especially a woman✨🤓✌🏻&❣️✨
It’s true, it is relaxing to watch someone else work! Lol. I do find it relaxing to work on my bike!!
SlingMod did the same thing to me. They sent me something different than what the install video showed. Only in my case, it did not work. Because I waited a few months to install it, they said they would not replace it.
Jack,, Thank you so much for watching! I’m sorry you had issues. If you call Slingmods now, just asked for an extension wire, a 12 inch one would work perfectly! Slingmods definitely needs to redo their video! I hope my video helps people get a clearer idea of how to install it.
@@RykerRydes Thanks for the advice. My LED's from Slingmod/TricLED was not for the Ryker fenders. It was another kit for the 'Knight Rider' strobe. They showed the install with LEDs on a flexible strip, like your install, but they sent me the ones on a PCB. When I bent it around the nose (as they showed), the PCB broke. They refused to send me the correct one because I waited too long to install it ("Out of Warranty"). Just a heads up with dealing with the two companies. Ryde Safe. -Jack
@@-jackinspokane6648 Wow, that is disappointing to hear. Slingmods was so great with sending me out an extra piece. They even threw in a nice t shirt. I tend to buy a lot from Amazon, their returns are so easy.
Hi really enjoy your channel. Please keep doing how to video. I live in Miami Florida. The riding around it is great if you are talking at the same time about future mod to your ryker. Very impress by you detailed explanation on the video. My question is have you had issue with the wheel coming off like a few people have had??
Hey Felix! Not sure what you mean by the wheel coming off?? Thanks sounds terrifying! I have never had any problems. I did take my bike in for a wheel nut recall, is that what you are referring too?
@@RykerRydes yes the recall
The recall was a 15 minute stop to the dealership. Easy!
I bought these light because of you an its a very simple plug & play. They're my favorite feature so far, but im debating on the front an rear A-arm lights/turn signals. But how do you get your wires not to rub?
Hi Chulo! Which wires rubbing are you referring to? 🤔
I am usually much quicker at replying!!! Been crazy busy building my new website: www.RykerRydes.com check it out.
Hello, in which store did you buy those LED strips? Thank you. :-)
The website link is in the video (watching the video is how YT views my success).
@@RykerRydes I then realized that and I was already looking at their shop....slingmods.com :-)
Hi Beth, I love the fender running lights but can the plug and play brake flashers work with these lights also..
Did you purchase the brake flasher from Slingmods? They should both work at the same time with a splitter. But the fender lights will not flash like the the brake light (I wish it did)
@@RykerRydes Yes I purchased the lights from Slingmods, I was told I didn't need a splitter the wires could "piggyback" on each other, I'll let you how it turns out.
Perfect!! Easy peasy!
@@RykerRydes Yes I did buy the lights and they are extremely bright and I really love them.
Hey great video love all of them wanted to know when you're riding at night with the fender lights are they bright enough to wear their blinding you
Hey Will, yes they are very bright and do take a little getting used to at night. But worth it, to be seen!!
@@RykerRydes thanks for the response I literally look at every single video you post. Try to do a lot of things to my wife's bike
I wanna do this to mine, but with my poor glare recovery and eyes being hurt by super bright light I worry this will be too much
My ryker has a grease coming from the back wheel. Is that a normal thing?? Or is it some kind of leaking ?
Sorry but I need a lot more info to make any kind of guess. It's probably best to bring it in (sorry).
Instead of the fender lights I would prefer better headlights or to install led fog lights.
Yup....I’ve got videos on those too! 😃
Do you find them to be blinding at night? Particularly the red facing the driver. I really like these, but don't want to be preoccupied with the red if it's so bright it is annoying at night. Also, do you ever wear shoes? lol
First off, NO, I never wear shoes (or at least I try not to) unless I am on my bike! Ok, as far as the fender lights, yup they are crazy bright, but I don't really mind. Being seen is so important on these bikes. You can always buy those yellow nighttime glasses it they bother you at first?
@@RykerRydes Sounds good. I'm debating between stuff like this, or just getting a set of underflow type lights that would be whatever color while riding and turn red when the brake is applied. But love your videos...now if only I could win the lottery to do all these things!
Hello! Thank you for the videos! I just received my 2019 Ryker Rally yesterday and have learned so much about it with your videos. I feel more confident approaching modifications on it with your help :)
I'd like to do this mod, but I'm curious to know if these lights also work with the turn signal?
Welcome to the family!!! Congratulations 🎊
No, sadly, these lights do not work with the turn signals. But I believe that Slingmods does sell replacement reflectors that blink with when using your signals.
Great job !
Thank you!!!!
Thank you for sharing the videos that you do. You and Bill both are awesome for helping people in the Ryker world.
Two questions...
One, do you find the lights bothersome riding at night or being more of a hindrance trying to see?
Question 2, I noticed your Can-Am logos on your air intake and on your front fenders... Are they reflective and where did you get them?
Hi Dave! Thanks for your comment and for watching. Funny Bill and I have become friends through this. He is a great guy and has really helped me out a lot.
As for your questions: #1 Not the lights are not a hinderance. At first they seemed way too bright and wanted to find a dimmer switch, but now, I can't imagine the bike with out it. I am all about making sure distracted drivers see me!
#2 The replacement logos on the air intakes are aftermarket, iridescent, stickers. Not reflective. The ones on top of the fenders are the original logo stickers that came on the air intakes. I just relocated them. If you check out ETSY, there are tons of people that will make custom REFLECTIVE stickers for you. I am getting one made that says Ryker Rydes with the youtube logo.
Have an awesome day!
Those are bright. You did a great job. What more can you do to your Ryker?
Thanks so much! There seems to be endless things to do to the Ryker. Money will run out, before possibilities!!! Lol
@@RykerRydes hahahaha. true! I am currently in the process of making a matching trunk bag to go with mine. lol. keep those videos coming . I think I will start a savings account titled Ryker accessories:-)
@@giovannam925 It's crazy how much these parts cost!! Thanks so much for watching!!! Ride on!!
So Beth, since you have girly fingers and I don't, can I bring my Ryker to you so you can help me install the lights? :-)
Come on over! Anytime 24/7 😏
By the way. They do look amazing can’t wait to get mine installed.
i was contemplating getting the LED light set you purchased vs the the reflectors. This is a @Ryker Rydes much better cost effective purchase. Are you also stating there are additional parts you needed (wire wise) that Should have been included or that you need to buy?
I was not short on wires. The current Slingmod’s video has slightly different wiring vs what they sent out. I got nervous and had them mail me an extra 12” piece (free) but never ended up needing it. Ps thanks for watching!!
@@RykerRydes gotcha. And thanks for making these
You very good nice job
Thank you very much Ken
Im curious why you cant just connect the LEDs at the fender lights and not run all that long wire?
Good question, that might work. It did seem like I had excess of that long wire.
Send me that link where u found those blue strips for that ryker
The blue stripes are a custom wrap. I got it done at a car wrapping place.
Does is have a ballast or does it share a factory ballast? Or can this be light with just a 12 volt battery? And a on and off switch?
The lights are a simple plug and play design. It does not have an on/off switch. I suppose if you where mechanical you could add a toggle switch.
Ps sorry for my delayed response, I am still on my bike trip.
I looked on the web site and can't find it can u help
Happy to help:
www.slingmods.com/canam-ryker-front-fender-led-running-light-strips-tricfenderz
Hello, based on your experience with these motorcycles, can you help me with this question, a new agency Ryker motorcycle when it has its first oil change, for your attention to my question, thank you.
Hi there! This video I did will help you: How and When to Change Your Can Am Ryker's Oil (6 easy steps)
ruclips.net/video/bOg6frl9XSs/видео.html
Do the lights stay on anytime you start your bike up or can you turn it off and on?
Yes they are on anytime your bike is on. It does not come with the ability to turn them off. I do wish they worked with the blinkers but have not found a way to do that!
Well what If I already have something plugged up to that plug i have the handguard led lights
Hi! Thanks for watching! Slingmods sells an expansion kit that would work.
www.slingmods.com/canam-ryker-front-fender-led-running-light-strips-tricfenderz?vehicle=4
Where you get the can-am sticker on the wheel fenders
I just relocated the original ones from the sides
What do you mean by relocated you still have the original on the air intake
The ones on the air intake I bought from someone selling them on FB. I can’t remember who. Sorry. Etsy has cool customizable stickers.
I spoke with a local motorcycle shop and was told that the Can-Am products are always in the shop. Is that true?
Hi Trey! I can only speak from my experience, and my Ryker has NEVER been in the shop! There was a wheel nut recall but that took 5 minutes. I am in a Ryker riding group and no one has ever mentioned any problems. If you buy new, it is under warranty, so no stress!
i have had mine since July/2019 and have not had it in the shop for any mechanical issues. They could be saying that because Can-Am wants you to do the first maintenance after 500 miles. And they could be in the shop because the owners don't do there on modifications. lol
@Ryker Rydes do you hook yours up to a battery tender often?
No, never. I live in Florida so I ride it year round. Just not as much in the hot summers!
@@RykerRydes good to know I live in Cali but it has been 42 degrees!! I have a nice suit to wear so I still ride as often as i can :-)
@@giovannam925 California must have some beautiful rides! Florida is so flat, it gets boring.
Where'd you get your stripes
Tint World
@@RykerRydes thanks
Excellent tutorial .
#granrappa
Thank you! Cheers!
I think you'll feel a bit safer knowing
your more visible at night. Thanks again for You.
Thanks Tom! Yes, it is so bright, even during the day. No car driver can use the excuse they didn't see me!! I appreciate you watching!!!
Don’t those hurt your eyes when riding at night? I feel like you would have a lot of light pollution while riding at night. Maybe even glare on your helmet face shield. 🤷🏼♂️
Yes, at first it took a bit to get used to. But being bright is what I wanted. I want to be seen!!
🤟❤️🌍🙂👍👍👋👋🇨🇵
600 dollar led and they even provide zip ties I really like there stuff but way over priced no everyone has fat bank accounts
I totally hear you, but these lights were $120 not $600
I am just like you with the barefeet!
LOL!!!