I was expecting a totally different result. These guys do know what they’re doing, though. I’m impressed. However, I don’t understand why they don’t use a Flatbed trailer to load the timber on, unless of course it needs to be in a container to be shipped overseas.
Hace ya rato,cuando trabaje de mojado en Azuza California,así subía la madera, aunque la mayor parte del tiempo me tocaba descargar los trailers con el forlip
We were doing that in the 1970/80's loading containers of lumber ... We did 4 bundles at a time and could load a contain in less than 15 min .. Our Asian buyers of White Oak/ Red oak were most impressed and took lots of pictures ... Haha
put four pkts timber 900 wide through a 1mtr std height door, 2 at a time with a hiab, and still left a walkway between. - Put 2 halfway in , move chain to bottom of pack slide on a roller and move to one side, lift and retrieve roller - repeat
Jeff DeBernardi each sling is about 10 tonne. The same fork lift pulls the load out. Note the white stripes on the floor of the container. That is wax allowing the sling to slide easily.
@@thomasschafer7268 Auf jeden Fall sehr lustig. Nur...warum fährt der am Anfang mit einem Stapler dem andern zu? Dazu braucht man keine 2 Stapler. Kann einer allein.
Long forks, or fork extenders. Or you put a strap under the board base stand on the bottom, and pull it out. Pretty much just reverse of how you got them in. Ive unloaded more trucks like this than I care to count.
They pull it out with a sling or maybe put the container on one of those short tippers and tip it out have pulled timber out of container but its fun to hook up slings
I've unloaded containers like this alot if you're fortunate enough to have a dock you just drive in the container run your forks under the lumber tilt back and drag it out not hard to do at all.
IcyS53 you close the forks up, drive them under the stack, lift and reverse, taking extra 'bites' as necessary, draw stack back, then stand frame under as loader did. Simples, been doing it for years. We've used similar techniques at load 20tonne generators
Really depends on the timber. Spruce for example to fill a 33 Cu.M. 20' sea container without any air gaps is only 19000KG. Online sources state it can be loaded to 25000KG including the 2300KG net weight.
@@zacharieetienne5784 normally, you maneuver the forks, you leave by moving the truck to the end of the load until you finally have the load on the forks straight onto the semi-trailer and then forward and loaded :)
Ray the wood in the container maxes out the allowable eight of a container at 24 tonne. So the wood is close to 20 tonne. The weight will be close to even. It won't be out enough to affect the transport or lifting.
@@colinl9018 haha we pay a smaller company to unload a shipping container like that and load it on a normal trailer because our health & safety won't let us do crazy things
That driver has skill; he goes nice and slowly, so as to not damage the cargo. Good job!
3 person on the forklift? that would be triple fired at my work lol
👏👏👏👏👏👏👏👏👏👏👍😊 trabalho de qualidade, equipe está de parabéns !!! 👌✌
Feliz Navidad" ruclips.net/video/MwsEfec2j_Mn/видео.htmlmbjhiuo
It is a good heavy machine. They are cool. I enjoyed the video.
Sensacional as coisas que o ser humano consegue fazer ....
Parabéns 👏👏👏🇧🇷
Simplicity is power
gonna be fun to unload
That's easy... been there, done that.
No problem the pull it out the are verry good forkliftdrivers
Mantap informasinya jangan sampe kasih kendor semangatnya
I was expecting a totally different result. These guys do know what they’re doing, though. I’m impressed. However, I don’t understand why they don’t use a Flatbed trailer to load the timber on, unless of course it needs to be in a container to be shipped overseas.
Indonesia is a large exporter of teak
instablaster...
Great JOB!
上手いなー👍
you got 2 forklifts...?
Will they secure their load
Good Team Work
Amazing work
You can see they have done this before. Very methodical. If they can get it in...someone can get it out 😊
Hace ya rato,cuando trabaje de mojado en Azuza California,así subía la madera, aunque la mayor parte del tiempo me tocaba descargar los trailers con el forlip
Those guys know what they are doing.
Très bon travail. 👍
We were doing that in the 1970/80's loading containers of lumber ... We did 4 bundles at a time and could load a contain in less than 15 min .. Our Asian buyers of White Oak/ Red oak were most impressed and took lots of pictures ... Haha
Emang orang kita paling bs kerja alkaline, mantap
great job guys
Clever, good work.
Muy buena maniobra. Y cómo lo sacar en su destino. Les aseguro que sólo tienen un montacargas para descargas.
Good idea
Container tem que ter tampa lateral basculante estão atrasados
Very skillful 👍
Nice calculate and driver
very smart! how will they get it out?
Wolfgang Ihde 1112223123
Stay tuned....
hook, chain and drag with a fork
They take them out the same way they put it in
With a big headache....
did this with timber and steel for years. Put roller under pile on trailer
mitzvah golem. Drywall too.
put four pkts timber 900 wide through a 1mtr std height door, 2 at a time with a hiab, and still left a walkway between. - Put 2 halfway in , move chain to bottom of pack slide on a roller and move to one side, lift and retrieve roller - repeat
Nah that's a bad idea
At the very beginning I thought they were gonna put it sideways 😂
Lo he echo tanbien nada de otro mundo para manejar un klarc se necesita de ingenio y maña y precaucion x sobre todo
walter coronel MAs q todo eso maña y como se dice en inglés safety first 💪🏼💪🏼💪🏼💪🏼
Good job 😉😉👌👌👌
their is no ersatz idea,very amazing loading mechanism.
Ada yg butuh operator forklif seperti itu..
Semangat terus kawan ❤️❤️❤️👍
Nothing says SAFETY like an extra passenger hanging on a forklift.
Lo complicado es bajar la carga.
Showww showww showww magnífico
Buenos los maestros 😄😄😃😃😀😀😊😄😄😃😀😁👍😁👍😁👍😁👍😁👍💪💪💪💪💪💪💪💪
Perfect. AAA
Who gets it out??? Rollers? Pallet puller? Rope around ass end? Dump It? 20 foot fork extentions? Steep hill, open doors?
Jeff DeBernardi each sling is about 10 tonne. The same fork lift pulls the load out. Note the white stripes on the floor of the container. That is wax allowing the sling to slide easily.
and the second package? this would be more interessting
No. Interesting is how to reload at the employer. Haha.😆😆😆
@@thomasschafer7268 Auf jeden Fall sehr lustig. Nur...warum fährt der am Anfang mit einem Stapler dem andern zu? Dazu braucht man keine 2 Stapler. Kann einer allein.
Now I want to see him loading the other stack!
Interesting video! Big LIKE
that is, without the help of a second forklift :)
Now could someone one tell me how would you unload the timber, my only quess is somehow put a sling around each lot and drag em out maybe!
They don't give a shit as the container will be unloaded somewhere else. But you are right though, a sling appears to be the only way.
Long forks, or fork extenders. Or you put a strap under the board base stand on the bottom, and pull it out. Pretty much just reverse of how you got them in. Ive unloaded more trucks like this than I care to count.
They pull it out with a sling or maybe put the container on one of those short tippers and tip it out have pulled timber out of container but its fun to hook up slings
I've unloaded containers like this alot if you're fortunate enough to have a dock you just drive in the container run your forks under the lumber tilt back and drag it out not hard to do at all.
No safety at all, why is there more than one person on that lift.
Fact no ppe at all so no safety at all
👍
Passengers are allowed on forklifts there? How fun!
Easy job
Не завидую тем кто это вручную разгружать будет)))
Well thats half a load.. I buy lumber like this and its fairly easy to unload
Looks like vitex
Cool - now lets see a video of how they get it out at the other end.
IcyS53 you close the forks up, drive them under the stack, lift and reverse, taking extra 'bites' as necessary, draw stack back, then stand frame under as loader did. Simples, been doing it for years. We've used similar techniques at load 20tonne generators
@@stevemortimer1950 Every time I've seen people load containers at work I imagine how easy it would be if containers had side doors...
@@simonnyman9031 Some used to have but the doors were too heavy for the hinges, they sagged and were difficult, almost impossible, to close.
Que loucura!
shouda put it the middle
I was expecting an 'idiots at work' video. Good job !
What could possibly go wrong...
Sir job milega kha chalte ho nice Dave
Very nice
May be just a TAD BIT over weight,, but, hey, its loaded.🙃
Really depends on the timber. Spruce for example to fill a 33 Cu.M. 20' sea container without any air gaps is only 19000KG.
Online sources state it can be loaded to 25000KG including the 2300KG net weight.
This is very easy to come out the load with porklift
What about using porkpie?.................................................
Gdzie BHP ja się pytam ???
Operarios bestias.
Eze work
Third world countries, where safety is a luxury.
Easy to move in,but problem is bring out is not easy
In about 10 to 15 minuten its empty pull it bach with a forklift also with 40 ft containers than you have a bridge behind it
In surabaya bang
🖒 🖒 👍 🙋 🙌
Olá boa noite meu amigo,tamos juntos um abraço!
The fun part comes trying to get it out
My thought's exactly 😂😂
Trailer has doors at both ends. Push it all the way through
For porklift rentals Indonesia 🙏🙏🙏
كم سعر المتر الزان لوسمحت
You can load it yourself, no problem :) only more time goes down :)
how
@@zacharieetienne5784 normally, you maneuver the forks, you leave by moving the truck to the end of the load until you finally have the load on the forks straight onto the semi-trailer and then forward and loaded :)
Das hätte auch jeder deutscher stapfahrer hin bekommen
First right turn over 25 mph, trailer will just keep rolling as it comes out of the corner.
I hope they had another pile to go in next to it!
@@simonnyman9031 yep and short boards sideways to the back doors.
45000 lbs in a 20ft container is common.
Why didn't they fill the whole truck, it's heavy on the right side.
Ray the wood in the container maxes out the allowable eight of a container at 24 tonne. So the wood is close to 20 tonne. The weight will be close to even. It won't be out enough to affect the transport or lifting.
Good job loading but what about off loading?
Someone else's problem hahahahahaha.
@@colinl9018 haha we pay a smaller company to unload a shipping container like that and load it on a normal trailer because our health & safety won't let us do crazy things
@@Frodokeuh So you go home to your family in one piece. That's how it should be, cheers.
Kayu bagus
Itu penampang berapa?
Kinda sketchy but it actually works 🤣
How they going to get it out ?? By hand 😂😂😂😂
Quero ver tirar isso aí depois.
Kayu ap itu lur
Ai sim hen
Now getting it out
In first seconds of the video I was think that 3,5t forklift holding all that timber itself.
Omg😲🙌🙌🙌
Good
unsafe mga sir .. only the operator lang dapat ang nasa forklift at ang spotter is dapat nasa 6 feet ang layo
Whatever Work's!! 👍🤪👍
😂🤣😂🤣
that's cooper thinking 🤔..
Di kim 2 yaa bg
Klau mau nambah drifer a mau bosd
Aku jg siap di tes
Loads off center unless more is being loaded
Vai um brasileiro fazer isso pra ver kkkkkk
🇭🇺👍
what is the name of the company please give contact mail, need to buy merbua
Which state do u belong?, plz send ur what's app no.
sharjeel05gill@gmail.com
Contact me for more information.......
Hutan lestari multi perkasa
Are you serious ? If you are serious i can help you
Hello sir