Removing Stuck Seatpost With Homemade Seatpost Puller Tool - Test 2 - Success!!!
HTML-код
- Опубликовано: 14 мар 2018
- Working on designing and building a tool to remove seized/frozen seatposts. This is my second version, and it was a success! This is an aluminum seat post stuck in a steel frame via galvanic corrosion. I also tried heat while the seat post was under pressure, which didn't do anything. FYI, the threads on the threaded rod were greased with marine grease.
Here is the first attempt:
• Making A Tool To Remo...
▶ Homemade Bike Tools: bit.ly/DIYBikeTools
▶ SUBSCRIBE & HIT THE 🔔 bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
/ rjthebikeguy
▶TOOLS
www.rjthebikeguy.com/tools
▶SHIRTS
bit.ly/RJBikeGuyShirts
▶WEBPAGE
www.RJTheBikeGuy.com - Хобби
For more bike repair videos hit the subscribe button ► bit.ly/SubRJTheBikeGuy
Cut the end of the post down weld a large nut to the end then use a heavy slide hammer on it while the frame is securely held in soft jaws of vice. Nothing beats impact for removing stuck parts.
@@iiredeyeiiredeye1569 ruclips.net/video/S3ek2GeZzE0/видео.html
How much do I have to pay you to send this to me for a weekend?
It's always so satisfying when a stuck seat post finally comes out.
Truely inspiring. Your sense of innovation, patience and resilience is unmatched. Thank you RJ.
Awesome! As someone who has battled and lost to more than one frozen seatpost I am totally digging this thread. Thank you for the inspiration!
This was more tense than a lot of thriller movies out there.
tense peed
Yeah! That is a fricking satisfying sound! Great job RJ! I bet Park Tool will be coming out with a design like this one any day now! LOL.
it's not new . I have seen it before.
Elijah GH in blue 😀 PT PP1 post puller
Calvin is a Dork!
Thanks for the video. I had the same problem with the seat post, but no welder. I broke the seat post off just above the frame while trying various methods. I was able to grind down the diameter of some 1/2 inch washers, then slid them up the seat tube and engaged a nut into a length of allthread to catch under the seat post. I added the weight from a slide hammer over the allthread, then added washers and a nut for the stop. Worked great with less effort than I expected. I also had to drill out a couple of rivnuts for the bottle cage to get the washers past, but luckily you also have a video on installing those. Maybe Park could make some plugs with an ID thread and a cutout to clear the rivnuts. A few different sizes for different seat tube diameters. Keep up the good work.
Fascinating. Loved the multiple booms as it let go. I wasn't expecting that. The whole time I was wondering about frame damage..props for examining that at the end.
Oh man I just made a tool like yours and then my friend said to check out your video. The tool works! I do agree adding a handle would help for control and safety. I do like yours in that it is very heavy duty and the extractor section that connects to the seatpost is nice or what I need to build. Hearing the pop was victory!
Awesome videos, and even more awesome tools by the master mind him self, RJ The Bike Guy. You need to patent that tool ASAP.
That was so satisfying hearing it pop! Great job RJ, love your homemade tools. Still use the one to remove stuck BB cups that you showed us how to make.
Nice! that first pop sounded like the bottom bracket had cracked...very ingenuous idea RJ...
Just the seatpost moving a little.
I’m sure I’m not the only viewer to shout “GET IN YOU BEAUTY” when you got it it out. Top work, as always, RJ.
So me and my dad got my seat post out and found out that someone had cut the seat post down to fit them on a xl frame. Which made it extremely hard to get out. With some cursing and swearing plus pb blaster and a blow torch we got it out. It literally had a 6 inch post and we were baffled at the bike I had gotten for free. I'm glad that we had a steel pipe that was the exact diameter of my seat post because when we went to use a port a power the seat mount that was apparently glued in with some sort of glue popped out and we popped the part into the new steel pipe. Thank you for your videos and support on how to and diy repairs!
Park Tools ain't got nothing on RJ........RJ makes the tool that makes the tool to do the job.
Great simple and robust design. Look forward to seeing future testing.
Just amazing how resistant the stuck seat post was. Thanks!
If you are worried about the galling on that washer replace it with a drilled piece of the steel tube. If you want the closest fit you sneak up to it with an adjustable mechanical reamer. Cool tool, reminds me of things I've made for various automotive work.
On the technique I would first use your tool to push it in before trying to remove it. I have better luck with this technique on seized joints. It doesn't need to be much.
I'll share with you the best of the best techniques I know of from a mechanical guy who could do anything. ( He welded a hand trike up for his paralyzed son. Coolest thing I ever saw as a kid! ) You heat the joint then pull it away and apply beeswax (toilet bowl gaskets are a cheap source) and it sucks it right in there and acts like a lubricant and its amazing how well it works on rust (our state uses salt so we become experts on this while working on our vehicles).
If you ever do rebuild it consider using something like an air chisel to vibrate that joint out of there. They can handle things that it normally takes a full out machine shop type hydraulic press to remove.
Last note: I wouldn't try pulling on that extension of the seat post for two reasons:
A) It's the obvious weak spot because it does a 90 right there
B) If you look closely you see a line down the middle of it which is proof that it is casted metal. While casted metal is very strong it is also very brittle and when brittle metal breaks it is often razor sharp. It's just not worth the risk to your own body by a sharp piece of metal alloy when a seat post is basically a cheap item. Also that seized dark spot is a likely place for tetanus to reside. I've been told by ER folk (when getting evaluated for getting a tetanus shot because I couldn't get them for other medical reasons) if the metal is fresh its rarely a risk but metal that has been sitting around for a long time in the rust is more likely to have it.
Love it. When I was a kid I rode my Raleigh Ultra Burner through the local river. After the seatpost welded itself. My dad tried heating, wrenching, wd40, hammering etc. It didn't budge. Had to scrap the bike. Your contraption would have been a life saver. Cheers you've earned yourself a new subscriber.
THIS IS AWESOME RJ!
I like those DIY tools... Your brain is working! Thanks for sharing
The tool you make is just work well. Amazing.
RJ you deserve one medal great job mate 😀.
Nice job on the seat post extraction tool! May wish to grease the threaded shaft to prevent galling and at the base of the nut/washer to reduce friction. A hardened grade 8 washer, or 2, will also make it easier to tighten. The In addition, once tension is applied to the shaft a few raps with a hammer may facilitate release of the stuck post. Where are you located I have a few stuck posts...?
wow! you are the Archimedes of bike repairing
I was looking forward to this!
Same.
What a great device...nice work RJ.
putting your fingers on the inner sides of this contraption seems like a really bad idea when it's under a lot of pressure. If any of its components break, you'd be down a few fingers.
a handle would be good instead of holding onto this area. seems safer!
hold it with heavy duty gloves or weld a wall guard.
No danger there at all. It's under a lot of pressure, but there is very little elasticity in the system, so there wouldn't be much movement, if all the pressure would be released.
This geezer did a great job in making that extraction puller tool. If worried about the possibility of threads stripping, always use a finer threat to alleviate the risk. Great video, & safe methodology adopted here.
Brilliant! Satisfaction level 1000!
Soooo satisfying. Great job!!!
I take my hat off to you sir with all these seat post challenges great work and funny message. All the best Andy
Nice job. Never underestimate a man with a spiral inclined plane...or a dremel tool. Keep the videos coming. And I wouldn't worry about the washer, just replace with each use.
Awesome video RJ!
Very nice RJ! I like it!
Excellent tool ! Good job
Agree with all the improvements and dangers for use. At the very least you have broken new ground....good job.
What a cool idea! Struggling with my seized seatpost since april.
ruclips.net/video/P-YpmDx86d0/видео.html
Love your perseverance!
Excelente !! Muy ingenioso mr. RJ
Fantastic job!
great work! success!
Good job 👍 I move my seatpost every so often to make sure its ok..
That's a brilliant idea. I'm happy you mentioned the plan for a handle because I was really concerned the threaded rod would snap while your fingers were less than an inch away.
I wasn't worried about the 5/8" rod snapping. More likely one of the 3/8" bolts. Or possibly the threaded rod stripping out the threads.
Haha, great! this tool is awesome! cool thinking. I have 3 steel bikes with aluminium seatpost, after seeing this video, i immediately checked if none of those where bonding, luckily not, used enough grease for now! cool video, thumbs up!
Great tool, I'm going into the garage to make one!
I really could need that! NICE Idea!
I think this would work with some type of clamp surrounding the post. And in the front steel fork as well for pulling a stuck quill also. Just in case you want to save the part like in some classic old steel bikes. Brilliant design I must say, RJ.
Great video. Nice job on setpost
Major congrats!
Congratulations! This is the tool for for the job! I spent days fiddling with spanners, blowtorches and hammers to extract one seized seatpost. I would have been quicker building that tool and removing the seatpost even if it was just for one time. By the way you could put a flat ball bearing under top nut to reduce draging
Very interesting build. You never gave up
Great Tool !!!
Great job!!! 😀
Great tool!
Congratulations. Nice tool.
That’s excellent. I wish I could weld one up!
Nice work!
Excellent video, a true inspiration. I think you could either aluminum braze or tig weld an aluminum plug into that hole, and reuse that post.
So cool!
I like the idea. You are doing great job :)
Great job RJ. Need a tool , make a tool
That's a really good tool you invented there.maybe you can make a patent and get it into a set and sell em to bike store's
that tool is BOSS!!
Great job!! I cheated when I needed to get a post out. I made a solution of lye. It worked really well. I protected the paint by using rubber corks on all the frame tubes (inside and out), taped a home made funnel to the seatpost opening, then covered the entire frame with plastic drop sheeting, kept a loaded garden hose at my side.
You should be called RJ the amazing bike guy. My Chief at work deals with the same problem nearly everyday and can't get them all out👌
Well done, thank you.
Another awesome vid
Eres super ingenioso, te felicito.
Damn!! You ARE the dude!
wow! thats awesome!
Freakin love this man!
Incredible!
Nice homemade tool. Also like they way you hand chop when you speak and surprised that you got shoes on.
Thank you and have a great day.
The floor was freezing.
Omg this was so easy and simplistic
Those knocking sounds are pretty satisfying.
Working very good...
I dont understand english very well, but I learned a lot just by looking, you are a genius👍
U are a genius man good job
Interesting build.... I would definitely watch using it on aluminum frames
This a really cool tool you made, a high lift jack works the same way just invert the frame in a pro park professional bike stand and reverse the jack rathchet cranking it down while standing on the heavy steel plate.WD40 RUST REMOVAL is what i use to eat thru the corrosion.
Good work
use a thrust bearing under the washer. That will help reduce the friction when tightening
The newest design has one. But I haven't had a chance to try it yet.
@@RJTheBikeGuy And good amount of oil or grease on the threads and where the nut presses on the washer/or bearing. Want to minimize the friction as much as possible with that much force on those, similar to automotive puller tools usage.
@@PhaseP1 It was greased.
Wow it's really hard to imagine just how tight the thing is
This was so damn satisfying to watch
Maybe weld a washer to the coupler... I think it will be better than replacing it with a larger nut.
Buy another bike!
I salute your genius sir.
Nicely done! The weakest link is the threaded rod and nut. I would use a high tensile, and if you wanna go to town with it - a thrust bearing under the nut.
I have added a thrust bearing, but haven't a chance to try it. That rod is pretty heavy.
Awesome idea! As for the last part, any time I've tried applying force to the head of the seatpost, it just pops the head off. I'd stick to drilling the post itself.
I have made a lot of special pullers and I found that if you use a full cage roller bearing (a small rear axle outer bearing for a rear wheel drive car) it's much easier to turn the nut. Yes also put a extension in the top square stock for safety if anything breaks on the clamping assembly you don't want your hands down there.. 🤗
Hats off to ya brother... I would have put the whole thing out by the street after 10 minutes. Nice video😁
why is that stuff in the middle always perfect in line, i see pepsi etc. btw i am a huge fan from holland, dont get me wrong, i have 6 bicycles no car i am 59, keep it up please those videos
Nice looking retro bike, I have a similar looking M.B.K. frame with low rear brake.
I have to admit that I wouldn't have the balls to try this twice, as it reminds me of trying to compress coil springs from a auto suspension. This was awesome nonetheless!
I've done that. That was scary.
Nice tool
The position of your left hand while you are cranking on that is giving me the heebie jeebies!
Am I the only one who would love to see a carbon frame being ripped apart by this frame torture device?
LOL!
LOL!
thats pretty funny hahah
LOL!
Check out Santa Cruz bikes torture device! Cool stuff! haha. STEEL will ALWAYS be real. I work in shop and see broken high end carbon frames all the time. Some aluminum but rarely steel unless theyre crashed. Carbon can be repaired. It wont be cheap!!
Pouring boiling water over the post worked for me. The heating and cooling of the metal helps expand it and loosens the seatpost.
I have tried heat/cold multiple times, and never worked. Maybe if the post is only slightly stuck.
Hi Rj. What passes through the bottom bracket? Won't the pulling force damage the threads?
Glad you didnt crush the frame :) Steel is real!