@@importsevens I have heard that conti is making a newer version that is easier to install. I've always had a second pair of hands to get them mounted.
@@freeyourmind3480 Hi, meins ist diese Woche gekommen und wiegt mit Aero-Bottle + Flaschenhalter an der Sattelstütze 9,45kg. Ich hab aber 2 Kettenblätter + Umwerfer (also das hier könnte leichter sein)
Wow, huge high emotion in Biking. Huge Procedere Just for one Bike. Other Hand, tears for cycling becomes so effortfull and complicated in Technology and Material. Watching this Video is fun pure. Great Job!
Fast so interessant wie das Fahrrad finde ich den Menschen der es zusammenbaut. Hoffentlich Mitarbeiter des Jahres. Mein Durchschnittspuls ist um 20 Schläge gesunken bei dem Video....
Beautiful!!🔥🔥💯💯💯 I can’t wait to buy either one of these, a cervelo, a Bianchi, or an S-WORKS but overall beautiful piece of functional art!! Well done CANYON!💯💯💯💯👏🏽👏🏽👏🏽💯💯
You'll see everyone with a piece of tape over it before long.....same as on the previous Speedmax's storage cover. No biggie, but that's not going to hold...
Excelente a mis 54 Años no imaginé que obra de arte de estás Bicicletas y el profesionalismo con que están hechas recientemente me robaron una bicicleta claro de las que venden en Perú no de ese nivel Adquirí una pero al ver estas maravillas me siento una pulga cuánta belleza y arte en estas bicicletas.
@@Dumbo3.1428 Yup, but i saw lots of the spacers deformed while tightened by pneumatic wrench at OE factories if it is not firmly attached with the shell. Maybe it will not deformed by hand tight.
watching a bike build video is the most calming way to relax, me changing tires on my wheels at home, I'm sweating bullets, did I get the tire in the right direction? Does the logo line up with the valve stem? LOL Kudos to you bike builder masters.
Es sin dudas la Mejor BICI de la Historia en el Mundo del Ciclismo, yo no se como pero JURO que Encanta , no se lo que cuesta pero doy por sentado que Vale hasta el ultimo centavo, de mi parte soy un trabajador humilde pero voy a hacer mi Maximo Esfuerzo para ahorrar y poder si DIOS quiere tener este Misil con dos Ruedas!!!!
I have never met a mechanic who properly installs the correct spacers for a crank. Just a single mm thick spacer that is not needed is enough to bind up the BB
He did no preload the bb on the non drive side, but probably the bearing alignment issue, it looked tight when he put the non drive side in, that normally means the bearings are on the piss..or the cups are under a lot of stress from the oval holes in the frame xD
That is just amazing! What a great video by your guys..well done! The appreciation I have for these builders and engineering that it takes, makes since why these machines cost as much as they do. Love it!
18:05 - the carbon quality of the seatpost makes me wonder how other structural elements of the frame look like? Let's hope that this bike is only for promotion and that Jan gets the bottom bracket fixed before Kona.
oh my gosh... this video certainly showcases the tech. that it is put in to developing this bike. everything is just almost as close as it can be to perfection. what a beauty..
whoever came up with the idea of filming this deserves a raise
If you are into bikebuilding/bikeporn go and give the channel Racepoint a look.
Gee Milner is the place for bike builds.
Agree
@@joshfeltham3278 I agree
TTC do this with Specialized two months ago und it could be that Canyon see that :-)
Good job Steve Jobs!
Hahaha
不覚にも笑ってしまった
kkkkkkkkkkkkkkkkkkkkk
Lol hahahaha
근하하하하
I shared this with my friend and he asked me how on earth had I finished a 20- minute-bike-build video. It was at this moment I realized I love bikes.
He mounted GP5000TL with his bare hands!? What a legend
5000TLs took me a shameful amount of time to install. There was a prototype # on the tire. I wonder if this is a second gen that are easier to install
I think that they are a special version not in trade
😂😂
@@importsevens I have heard that conti is making a newer version that is easier to install. I've always had a second pair of hands to get them mounted.
@@enricobraglia6336 that’s what I keep saying to my inner self while completely loosing it mounting them
Auf dieses RUclips-Dreambuild von unseren Räden habe ich schon lange gewartet. Stark!
Was hat so ein ding an gewicht?
@@freeyourmind3480 Hi, meins ist diese Woche gekommen und wiegt mit Aero-Bottle + Flaschenhalter an der Sattelstütze 9,45kg.
Ich hab aber 2 Kettenblätter + Umwerfer (also das hier könnte leichter sein)
@@freeyourmind3480 etwas über 10 Kilo. GTN hat’s gewogen
Well, that bottom bracket spins beautifully...
ahah i was, like...............
Doesn’t have to spin and spin and spin
@@o11378 ceramic speed, ring a bell?
This is an irony I presume? The thing stopped dead in half a second. Its pretty strange they left this in the footage...
Yep, same, I was like... what ?? Was it just too tight you think ? Does anyone have a clue guys ?
einer der spannendsten filme die ich seit langem gesehen habe! was für ein traumbike! und der typ macht seinen job natürlich auch perfekt
I can watch this over and over and it doesn't get boring
Is it weird that I watch these videos on repeat as art and ambience when I’m home ?
Nope
This was like meditation
Wow, huge high emotion in Biking.
Huge Procedere Just for one Bike.
Other Hand, tears for cycling becomes so effortfull and complicated in Technology and Material.
Watching this Video is fun pure.
Great Job!
How i think i look when building my bike back up after the easyjet flight to mallorca
Watching the whole video as if I can even afford it...
Same here
the wheelset costs more than my car
Same
Wahnsinnig inspirierend! Danke Canyon für dieses eindrucksvolle Montagevideo! Great!
I feel like I can't afford to even watch this.
The most sophisticated TT bike ever and yet it looks simple.
This could open next year in the Cannes film festival!
Quem disse, não haver arte em amontar uma bicicleta? Esse cara é féra!!!!! A bicicleta um espetáculo!
By far the best designed tri tt bike.
What a strangely compelling watch. Great relaxation tool. Very impressed by the content and the bike!
Fast so interessant wie das Fahrrad finde ich den Menschen der es zusammenbaut. Hoffentlich Mitarbeiter des Jahres.
Mein Durchschnittspuls ist um 20 Schläge gesunken bei dem Video....
Beautiful!!🔥🔥💯💯💯
I can’t wait to buy either one of these, a cervelo, a Bianchi, or an S-WORKS but overall beautiful piece of functional art!! Well done CANYON!💯💯💯💯👏🏽👏🏽👏🏽💯💯
i can watch this dude assemble bicycles all day
It’s not just a bike, it is THE BIKE
A master mechanic at work oh sorry creating a masterpiece.
When Steve Jobs came alive and created amazing TT bike for the world champion!
When I purchase my CANYONS, I want this guy to build them !,,
Das ist pure Stressbewältigung.
존경하는 스티브 잡스!
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 최곱니다♡♡♡
That hydration spot got me totally unprepared. I'm sold!
I wish, I could have this Bike and I will use it to influence the Filipino People, what the future is💚🚲
😅
My favourite bit is the little magnet to keep the drinks tube for slapping the rider and flapping about, properly simple, job done
Assembling a fighter jet on wheels is soothing to watch.
the storage solutions on this bike are simply a work of art.
You'll see everyone with a piece of tape over it before long.....same as on the previous Speedmax's storage cover. No biggie, but that's not going to hold...
@@siebert12 it is going to hold obviously
My name is Paulo Silva I am from Brazil, I dream of one day having one of these, because perfection is very great, congratulations!
This should be in memory of Stefan!
Canyon остальное компромис просто уровень high level top 🔥
Wow, das ist ja mal ein Video, super.
Ich wünschte, so entspannt könnte ich auch schrauben. In der Zeit habe ich gerade mal einen Reifen gewechselt 😀
I admire Canyon's engineering.
Nur das Beste für den BESTEN !!!! Macht Spaß zu zu schauen 👍😘
Excelente a mis 54 Años no imaginé que obra de arte de estás Bicicletas y el profesionalismo con que están hechas recientemente me robaron una bicicleta claro de las que venden en Perú no de ese nivel Adquirí una pero al ver estas maravillas me siento una pulga cuánta belleza y arte en estas bicicletas.
*best Andre 3000 voice possible*
SO FRESH AND SO CLEAN
Loved the bike but give me the tools any day.... Congrats to Jens Nuebert... work of art
esa bicicleta es para extraterrestres!!!!!! y lo digo por muchas razones y una de ellas la mas importante el precio!!!!!!, genial buen trabajo.
this bike, like Frodeno, is next level!
10:28 The outer spacer was supposed to firmly attached with the shell of bottom bracket per user manual?
In my experience it attaches by tightening the crank.
@@Dumbo3.1428 Yup, but i saw lots of the spacers deformed while tightened by pneumatic wrench at OE factories if it is not firmly attached with the shell. Maybe it will not deformed by hand tight.
I had a nice time watching this assembling video :)
watching a bike build video is the most calming way to relax, me changing tires on my wheels at home, I'm sweating bullets, did I get the tire in the right direction? Does the logo line up with the valve stem? LOL Kudos to you bike builder masters.
Es sin dudas la Mejor BICI de la Historia en el Mundo del Ciclismo, yo no se como pero JURO que Encanta , no se lo que cuesta pero doy por sentado que Vale hasta el ultimo centavo, de mi parte soy un trabajador humilde pero voy a hacer mi Maximo Esfuerzo para ahorrar y poder si DIOS quiere tener este Misil con dos Ruedas!!!!
Now I understand the secret to being a world class triathlete. It’s all in the bike build. : )
What's the point in having Ceramic Speed with a bottom bracket as sticky as that?
that was what killed me...pressfit bb -- at least a threaded two piece if not a proper threaded bb -- call in Hambini for a roasting
Agree. The pedals stopped so fast when he let it go
@Markus Patients what is the trade off?
@Markus Patients what is necessary pedal resistance?
@Markus Patients Why are you trolling? What do you get from doing that?
Excellent video. great editing, great choice of music and great assembly skills to build so hot looking bike.
ahhh the sounds of a tire seating
the touch and smell of a new gp5000
Bro, this is a work of art.
MASHAALLAH khub valo video........
Absolutely pleasant to watch...
What a beautiful bike!
This guys got incredible hands
i know what is a bike, i've got several at home myself, so believe me my friends, this, is closer to a rocketship than to a bike
poetry in motion
pure beauty. its the spare tube compartment for me. lol
Honestly, these wheels are sooo beautiful, but probably also super expensive
€12500 + extra for carbon options + non standard chainring
everything in this bike is super expensive, not just the wheels
What an artist :-)
Eye-candy construction !
The best meditation I have ever had
Disappointing crank spin - for a Ceramic Speed BB I expect much more than one and a half of a turn.
Its not about the Ceramic Speed BB, its about the frame. The bearing could be poorly aligned.
Yeha what was that all about one and a half spin and it just died?!
I have never met a mechanic who properly installs the correct spacers for a crank. Just a single mm thick spacer that is not needed is enough to bind up the BB
could just be alot of new grease
He did no preload the bb on the non drive side, but probably the bearing alignment issue, it looked tight when he put the non drive side in, that normally means the bearings are on the piss..or the cups are under a lot of stress from the oval holes in the frame xD
very clean with the 1 by
That is just amazing! What a great video by your guys..well done! The appreciation I have for these builders and engineering that it takes, makes since why these machines cost as much as they do. Love it!
I don't care about the bike, I want his tool set!
I Love watching these video's
18:05 - the carbon quality of the seatpost makes me wonder how other structural elements of the frame look like? Let's hope that this bike is only for promotion and that Jan gets the bottom bracket fixed before Kona.
Amazing Bike for the the best triathletes!
what a piece of art
Another one at the aim of Hambini.
Excelent job..... Monster Bike for monster men...
He works like a magician
Wow what chain and cassette are those?! Would look stunning on my aeroad!
that frame is so good lookin!
Can't believe he doesn't use a torque wrench once... Canyon I'm available for a pro mechanic position.
He can feel it.
So many parts
everything exactly to torque specs. good job.
' If only horses could fly, beggar like me still cant dream'.
I have the same !!!
I have the same bottle cage as the one behind his saddle :D
Beautiful work.....👍....💰💰💰💰💰
note how he is using a sls or mjf printed part to mount the transponder!! 15:53
Hope all have a bike😁.
More power to you.
Sehr sehr hochwertig und sehr sehr geil 🤩🤩🤩
Wow this is incredible!
oh my gosh... this video certainly showcases the tech. that it is put in to developing this bike. everything is just almost as close as it can be to perfection. what a beauty..
Beautiful bike 🚴
Hambini does not approve that BB spin.
However the rest of the design is simply amazing.
Hambini’s real name is Sanjeev Varah and he’s a fraud who rigs his videos to try and sell you overpriced BBs
@@dafj5618 ok but he is funny
@@libertyride4174 laughing at him comes easy, for sure
@@dafj5618 no I find the videos funny but it's not that I keep the info that he gives 😂😂
@@libertyride4174 he is a joke
What bike repair stand is that one? Looks practical.
No torque wrench?
Top d mais 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾
The Grail CF SLX 8 Di2 is in my wish list cuz of this
Hahaha, same like me!
Вот это аппарат!!!!Красотища!!!!
Found this therapeutic
Frodenos new rocket!
THIS IS ART
How many extra watts does it take to overpower crappy bottom bracket ?