Have you been able to locate an FCCID for these? If so, it may help to figure out what chip is on the board, and then you would have a better idea which way to go in regards to reflashing or reprogramming. I had an old payanywhere tablet that after about 6 months of research I was finally able to reflash and use as a normal tablet thanks to the fccid.
I turned it off and when the logo popped up I held both volume and power button and when the logo popped back up I tapped it 3 times and it gave me the option to factory reset without the password
I actually have a lot of the tools to do this and have several of them I've been thinking about doing the same thing with. Did you get any closer since this video or have any info you want to shoot my way? Ill probably take it apart and check the wiring to those buttons, see if it was labeled on the board. After seeing the usb port though, im sure theres a way to reinstall the android apks and reset it from a software side.
@@evidentbiz yes, I've tried all kinds of combinations or versions but no success. Excerpt for one time it did momentarily boot into bootloader mode but so far in unable to figure out how I did it. Lol
On this same mission right now with a few Clover Minis, i even spoke to my contact at Clover and a Merchant Processor, neither could assist unfortunately
Have you been able to locate an FCCID for these? If so, it may help to figure out what chip is on the board, and then you would have a better idea which way to go in regards to reflashing or reprogramming. I had an old payanywhere tablet that after about 6 months of research I was finally able to reflash and use as a normal tablet thanks to the fccid.
I'm not sure, I'll look into it.
I turned it off and when the logo popped up I held both volume and power button and when the logo popped back up I tapped it 3 times and it gave me the option to factory reset without the password
You tapped the logo 3 times?
The power button *
Did it unlock it because mines still have the password on it and i forgot it
Any updates?
they secret sequence is up, up, down, down, left, right, left, right, b, a, select, start! VIOLA
i own aswelll one clover C100 and i would like to reporpose it
I actually have a lot of the tools to do this and have several of them I've been thinking about doing the same thing with. Did you get any closer since this video or have any info you want to shoot my way? Ill probably take it apart and check the wiring to those buttons, see if it was labeled on the board. After seeing the usb port though, im sure theres a way to reinstall the android apks and reset it from a software side.
Please let me know what you figure out.
I'm gonna ask some software programmers to find out there take on it. Especially, if it's Android!!!!
Please do.
I found a smaller version at my job
Please share....
following this....
I'll try too and let you know
following this
I am locked out forgot pascode email everything can any one help ?
following :)
Let me know what you find out.
Have you tried power button and volume down at the same time until it boots in the recovery menu?
@@evidentbiz yes, I've tried all kinds of combinations or versions but no success. Excerpt for one time it did momentarily boot into bootloader mode but so far in unable to figure out how I did it. Lol
@@tomking3502 I also have a station that I was trying to repurpose. I will try some too and let you know if I figure anything out.
On this same mission right now with a few Clover Minis, i even spoke to my contact at Clover and a Merchant Processor, neither could assist unfortunately
So stupid. It’s programmed to a credit card processor. If it’s not tied to your account and bank it’s a door stop.