When I started in the early 90s, my boss/mentor tolD me to spend 10% of my cheques every week, till I could build an entire house with just my tools. He was the best framer I've ever seen in 25+ yrs
Great video - reinforcing the basics. I see too often guys running around with 30 lbs of tools as if they are running a hardware store. Go up and down ladders and climb through rafters and you will soon realize that less bulk and weight = more productivity.
If you show up each day with the plan to be the most helpful person on the job.....sprinting to get things, not walking....NEVER on your phone.....you will show that you are worth keeping, training and rewarding. Learn all you can. Even try to find better ways to do things (but don't argue with the man who signs your check). One day, you'll go out on your own and be the decision maker.....then the fun REALLY starts!
Used the same 16oz Plumb steel handle for 25 years now. When I bought it back then I went through 20 of them on the rack and found this one which was properly balanced and I have used it ever since. For me a 30’ tape was always the sweet spot, especially if we are doing any metal or concrete work. One thing I like to have with me you did not mention is a large centerpunch. Very handy for lots of stuff.
I apologize for the bad camera work.....if y'all want, I will make a second video that talks more about the next level of tools I chased after as time progressed. I'm all about content and message so you won't actually see me in too many videos......there's NO CHANCE I want anything close to fame.
They are channel lock side pliers, they are absolutely fantastic and always carry em. Bought a new pair but prefer the older pair where it doesn't cut as much as just grips.
"they'll pretty much laugh you off the job site you show up with one of those" Real talk. I started framing two summers ago, don't own a single tool that I started with.
Yep....I would be a jerk and mess with whichever new guy showed up...just to see if he could take and give verbal abuse...kind of a gauge of mental toughness I suppose.
I'm in the fortunate position that my financial situation at the time I started really prevented me from quitting the job, I was really housing insecure and pretty much out on my ass broke with bills to pay, a maxed credit card and no more parental ATM. Took a bit to get my nuts crushed enough to realize that I wasn't as smart as I thought and that I had better shut up and listen and hop to when the foreman needed my ass to move, but little by little I started to get a clue and now my pays up about 25% from where it was, I have a wife and we are buying a home together... Framing is just about the best thing that happened to me since I believed the Gospel of Jesus Christ.
There is a little square on the left side of the battery port on all the older makita tools . Chisel that sucker out and you can use the new batteries 👍
What is the model number of that Makita? I bought one off eBay to fix but whoever has it before peeled the sticker off and it's this exact model. TIA. Great vid btw
The M1 is pretty sweet. I like my Stiletto more (partly because it was a gift) but also I have used it for years. The Main thing I like about the M1 is that the weight of the head feels farther out/away from my hand than the Ti-Bone, and that seems to make hand nailing feel easier. The handle is also more grippy (M1) for those who wear gloves.
Decent video, especially considering that whenever you started framing there was no RUclips videos to see what a carpenter carried. I’m in my 30’s and only a year or so into my career, but I’d probably be “laughed off the job” if I carried 2 tapes in my bags. Maybe leave one at the cut station if you’re not stuck there permanently? The other thing, hammers. A smooth face isn’t gonna beat up the studs too bad and if you get into a spot where you’ve got to go easy, you won’t leave waffle marks all over the finish. Your Stiletto wasn’t “smooth face” but from what I could see, there wasn’t much waffle left, if any. Also, I did get a framing hammer years ago, before I got the job and I remember thinking I didn’t need the nail holder. Get one with the nail holder!
I was a carpenter for 10 years in the 80's and we only used smooth face hammers to prevent damage installing windows and doors etc. Always used Estwing 22oz framing and 16oz finish hammers.
Ya need a cats paw and a 1 1/2" bitch chisel. That knife isn't making it to far, grab a serious razor knife and your set. I've carried a used those top puller plyers for more things than designed for, wouldn't climb up without them. also,,,, I use an old school aluminum flat style chalk box with the flip out crank knob intentionally broke off, use a thick nail set to crank it in. thin box so as to not clog up the bag. Thanks madman...... build on!
dalluge titanium 16oz swanson speed square hardwood carpenter pencils tajima black chalk line fatmax 30' awl stanley #199 utility knife stabila magnetic torpedo level occidental tool belts skilsaw hd 77 THAT FUCKIN IT YOU CAN BUILD A CASTLE
True. I mostly use a hammer for hitting things apart or into place. A Nail gun is the way. I guess I always wanted something cool but never had the cash for it. Hammers have always been cool to me. I enjoy using cool tools to do the job....and some days it takes every trick in the book to stay motivated. When I'm kitted up with all my favorite tools, I know I can tackle anything....even in rain, snow, sand storm...whatever.
When I started in the early 90s, my boss/mentor tolD me to spend 10% of my cheques every week, till I could build an entire house with just my tools. He was the best framer I've ever seen in 25+ yrs
Instablaster.
Cheques. Hahahaha
Great advice to invest in yourself......
Great video - reinforcing the basics. I see too often guys running around with 30 lbs of tools as if they are running a hardware store. Go up and down ladders and climb through rafters and you will soon realize that less bulk and weight = more productivity.
Awesome video!! Love to see more of these vids from you and sharing your knowledge too!
So true about the calling you feel walking through the tool section
If you show up each day with the plan to be the most helpful person on the job.....sprinting to get things, not walking....NEVER on your phone.....you will show that you are worth keeping, training and rewarding. Learn all you can. Even try to find better ways to do things (but don't argue with the man who signs your check). One day, you'll go out on your own and be the decision maker.....then the fun REALLY starts!
i get told to slow down lol
Used the same 16oz Plumb steel handle for 25 years now. When I bought it back then I went through 20 of them on the rack and found this one which was properly balanced and I have used it ever since.
For me a 30’ tape was always the sweet spot, especially if we are doing any metal or concrete work.
One thing I like to have with me you did not mention is a large centerpunch. Very handy for lots of stuff.
I apologize for the bad camera work.....if y'all want, I will make a second video that talks more about the next level of tools I chased after as time progressed. I'm all about content and message so you won't actually see me in too many videos......there's NO CHANCE I want anything close to fame.
They are channel lock side pliers, they are absolutely fantastic and always carry em. Bought a new pair but prefer the older pair where it doesn't cut as much as just grips.
Nice bags! When you’re in the sixth decade you look for everything with the biggest and brightest numbers ;)))))))))))
Weapon of construction 🚧
Outstanding advice and great video, thanks for your insight!
Chalk a line, run it with a clear coat of spray paint. I see it all the time in the comercial side of layout.
“I cut it right the first time”. 😆👏 love that!
That Martinez hammer looks awesome.
Way out my price range when I looked it up unfortunately 🤦♂️😏
"they'll pretty much laugh you off the job site you show up with one of those"
Real talk. I started framing two summers ago, don't own a single tool that I started with.
Yep....I would be a jerk and mess with whichever new guy showed up...just to see if he could take and give verbal abuse...kind of a gauge of mental toughness I suppose.
I'm in the fortunate position that my financial situation at the time I started really prevented me from quitting the job, I was really housing insecure and pretty much out on my ass broke with bills to pay, a maxed credit card and no more parental ATM. Took a bit to get my nuts crushed enough to realize that I wasn't as smart as I thought and that I had better shut up and listen and hop to when the foreman needed my ass to move, but little by little I started to get a clue and now my pays up about 25% from where it was, I have a wife and we are buying a home together... Framing is just about the best thing that happened to me since I believed the Gospel of Jesus Christ.
Always have a back up... Most effective!
There is a little square on the left side of the battery port on all the older makita tools . Chisel that sucker out and you can use the new batteries 👍
Really!!! Thanks bro. You rock!!
Thanks for the video 👍
Flat hammer claw = rip claw
Thin pry bar = glazer bar
Nail puller = cats paw
rip claw = goats head
cats paw = goon spoon
fun names for everything
@@simply_based cats paw = pussy paw
What is the model number of that Makita? I bought one off eBay to fix but whoever has it before peeled the sticker off and it's this exact model. TIA. Great vid btw
Great advice!
How u like the martinez hammer ??? I am DYI er and I want that hammer bad
The M1 is pretty sweet. I like my Stiletto more (partly because it was a gift) but also I have used it for years. The Main thing I like about the M1 is that the weight of the head feels farther out/away from my hand than the Ti-Bone, and that seems to make hand nailing feel easier. The handle is also more grippy (M1) for those who wear gloves.
@@para-cad_llc Man I love them both as a DYI guy I just dont do much hammer but I got a deck coming up and oh man I need that hammer love it
I almost forgot how occidental pouches look like when they are new 👀 I should condition mine lol but we have pretty much the same tools
Nicely Done Good Luck To You...
Decent video, especially considering that whenever you started framing there was no RUclips videos to see what a carpenter carried. I’m in my 30’s and only a year or so into my career, but I’d probably be “laughed off the job” if I carried 2 tapes in my bags. Maybe leave one at the cut station if you’re not stuck there permanently? The other thing, hammers. A smooth face isn’t gonna beat up the studs too bad and if you get into a spot where you’ve got to go easy, you won’t leave waffle marks all over the finish. Your Stiletto wasn’t “smooth face” but from what I could see, there wasn’t much waffle left, if any. Also, I did get a framing hammer years ago, before I got the job and I remember thinking I didn’t need the nail holder. Get one with the nail holder!
I was a carpenter for 10 years in the 80's and we only used smooth face hammers to prevent damage installing windows and doors etc. Always used Estwing 22oz framing and 16oz finish hammers.
Ya need a cats paw and a 1 1/2" bitch chisel. That knife isn't making it to far, grab a serious razor knife and your set. I've carried a used those top puller plyers for more things than designed for, wouldn't climb up without them. also,,,, I use an old school aluminum flat style chalk box with the flip out crank knob intentionally broke off, use a thick nail set to crank it in. thin box so as to not clog up the bag. Thanks madman...... build on!
Brilliant
Good video
dalluge titanium 16oz
swanson speed square
hardwood carpenter pencils
tajima black chalk line
fatmax 30'
awl
stanley #199 utility knife
stabila magnetic torpedo level
occidental tool belts
skilsaw hd 77
THAT FUCKIN IT YOU CAN BUILD A CASTLE
Hammer standards change per trade
We called your pigs foot a cat's claw.
Thats funny, Typically buy your own pencils.
That’s the smallest toolkit I’ve ever seen. No cutting tools?
A whole truck full. These are what is carried in my bags when I was a rookie
What's up with all these fancy framing hammers all these guys are using ? I mean, who even uses a hammer anymore?
True. I mostly use a hammer for hitting things apart or into place.
A Nail gun is the way.
I guess I always wanted something cool but never had the cash for it. Hammers have always been cool to me. I enjoy using cool tools to do the job....and some days it takes every trick in the book to stay motivated. When I'm kitted up with all my favorite tools, I know I can tackle anything....even in rain, snow, sand storm...whatever.