Yes it’s supposed to be in your hop up in the bottom an when you put back together your barrel an receiver those two holes are where the nuts are to, your screw screws into that put it back or your barrel loose
Just got mine and in the manual theres a sticker over fullauto saying "single only" can some1 help get it to fullauto? :( flicking the switch doesnt do anything
same here but figured it out. if you take out the slide and unscrew the "switch" you will find out that the hammer reset piece has been glued in semi auto position. mine came loose easily after a little pushing and pressing. they also filed down a part of the piece which helps the switch to push the piece. you can glue something there to help it move or maybe try to screw in a little screw there. mine works without it.
Managed to get the piece loose with force and heat applied, but its veeery stiff, so I need to take off the slide and move the actual piece if I wanna change firemodes
@@wyz2285 I used to own a mkII for years, It was cut down slightly and threaded for a standard parker hale, I have arthritis in both my hands now so a toy gun is fine by me. Thanks for your help.
@@anderssorenson9998 I own a MKIII competition and despite the longer heavier barrel and overall weight it still kicked harder than this. But nothing wrong with it as a toy gun.
Is the nozzle proprietary or compatible with Marui G18's nozzle? Just realised it is WE spec in gas entrance, was wondering if I can swap it with Marui spec nozzles so that i don't need to swap out my mag's routers
Yeah it doesn't fall short hes nitpicking its the most amazing pistol I've owned recently and I collect them. I run mine fresh out of the box with an hpa tap and a primary airsoft m4 adapter. .3s, dial it in amd you are good to go. This is one of those guys who puts alot of extras in to try and make himself seem more knowledgeable or superior
@@wyz2285HD If I already imagined that, I mean once I updated it, internal ratech maple leaf and t.n.t, I know it would be expensive for what it is, which is more worth it? I have a hi capa but I want something fullauto to have fun, sorry for mi shit of english im spanish jajajajaja
@@DonnieDarkoType I think the vfc has steel internals, but a bit proprietary. If you're performance focus, I'd go with TM and buy a Guarder light weight BBU, then change the bucking only. The plastic slide is light and is very durable with a light weight BBU.
@@wyz2285HD is it really worth it? It hurts me a lot that it is made of plastic, also I only want it to play it from time to time for fun, a tm + metal slide comes out about 250 minimum and we upgraded about 180, if it is really worth it, I will rethink it but i don't want to spend toomuch mony
@@DonnieDarkoType Why the metal slide? It's heavy. I mentioned TM because it's the cheapest way to get a good plastic slide (people pay hundreds for 3D printed plastic slide for a reason). If you absolutely need metal slide, buy any you like and use until it breaks, changing only the bucking. The steel trigger sets are almost as expensive as the gun.
Finally a detailed review by someone who knows his shit in English.
CN you make a video about that TM Glock?
Looks like there’s some 3D printed parts in it?
hi , what is a name of that piece ? 8:02 ?
belle vidéo , pourquoi le blow back housing percè ne fonctionne t'il pas? , s'il te plait ...
I would love to see a one piece upper like the VSR-X, not sure if it’s possible with the style of hop chamber tho
Action army makes one, cost way more than the pistol though
Which size drill did you use to drill the bolt?
I swapped my inner barrel and now i have an extra black nut. Does anyone know where it might go?
Yes it’s supposed to be in your hop up in the bottom an when you put back together your barrel an receiver those two holes are where the nuts are to, your screw screws into that put it back or your barrel loose
I’m late ohh well
@@beingre_bornbrb figured it out, but thanks man
Will your store be back online anytime soon?
Nice ball Roadmaster 👍
Just got mine and in the manual theres a sticker over fullauto saying "single only" can some1 help get it to fullauto? :( flicking the switch doesnt do anything
same here but figured it out. if you take out the slide and unscrew the "switch" you will find out that the hammer reset piece has been glued in semi auto position. mine came loose easily after a little pushing and pressing. they also filed down a part of the piece which helps the switch to push the piece. you can glue something there to help it move or maybe try to screw in a little screw there. mine works without it.
@@2beersOG Thanks for replying! Gonna try it :) Still havent figured out to get the bolt thing out tho
Managed to get the piece loose with force and heat applied, but its veeery stiff, so I need to take off the slide and move the actual piece if I wanna change firemodes
@@Tapirrr if you want to take the slide out just unscrew the back sights, and the slide willl come out as one piece
@@Tapirrr also try to remove every last bit of the glue by using heat and or nail polish remover
Hello, how have you solved the problem of internal wear of the replica? With a minimum of use, it wears out with the friction of its internals.
Two words...
Cow cow
I would like to make holes in my bolt carrier, I’m curious as to know what drill bit you used?
I already did it, almost messed it uuup 💀
How does the recoil compare to the Ruger .22? From you shooting it I would say similar. This would sell it for me.
It's no where near. A hicapa/1911with full metal slide on co2 comes close to a .22
@@wyz2285 So a .22 short
@@anderssorenson9998 On a hot day and anything stronger than green gas, maybe. This is not the pistol if you look for real firearm feel.
@@wyz2285 I used to own a mkII for years, It was cut down slightly and threaded for a standard parker hale, I have arthritis in both my hands now so a toy gun is fine by me.
Thanks for your help.
@@anderssorenson9998
I own a MKIII competition and despite the longer heavier barrel and overall weight it still kicked harder than this. But nothing wrong with it as a toy gun.
Is the nozzle proprietary or compatible with Marui G18's nozzle? Just realised it is WE spec in gas entrance, was wondering if I can swap it with Marui spec nozzles so that i don't need to swap out my mag's routers
It's proprietary
@@wyz2285 oof, there goes my plan right there
When are you going to open your store back up???
About TDC? news?
I’m going to hpa tap the mag it came with do you know if it uses Tokyo marui threads or what?
If your going to hpa tap it, just get an adapter or tap a extended mag
Didn't go into the trigger mechanism
Great vid.... what is the length of the inner barrel?
Dj Shy 129mm
if i want to use hpa with it what type of nozzle /piston upgrade should i get?
none
Yeah it doesn't fall short hes nitpicking its the most amazing pistol I've owned recently and I collect them. I run mine fresh out of the box with an hpa tap and a primary airsoft m4 adapter. .3s, dial it in amd you are good to go. This is one of those guys who puts alot of extras in to try and make himself seem more knowledgeable or superior
Is the hopup proprietary?
Yes.
Which when you say glock mags you mean any glock or do you mean glock 17
Anyone have FPS/Joule estimates for this on Green gas?
320fps
@@304aft6 with .2g?
@@Evan-eh9dd yes
@@304aft6 tyty
@@Evan-eh9dd @ in Thailand (around 35c) the fps goes up to 39x
WE 18c or AAP-01?
Any or none, they both shit on the inside
@@wyz2285HD If I already imagined that, I mean once I updated it, internal ratech maple leaf and t.n.t, I know it would be expensive for what it is, which is more worth it? I have a hi capa but I want something fullauto to have fun, sorry for mi shit of english im spanish jajajajaja
@@DonnieDarkoType I think the vfc has steel internals, but a bit proprietary. If you're performance focus, I'd go with TM and buy a Guarder light weight BBU, then change the bucking only. The plastic slide is light and is very durable with a light weight BBU.
@@wyz2285HD is it really worth it? It hurts me a lot that it is made of plastic, also I only want it to play it from time to time for fun, a tm + metal slide comes out about 250 minimum and we upgraded about 180, if it is really worth it, I will rethink it but i don't want to spend toomuch mony
@@DonnieDarkoType Why the metal slide? It's heavy. I mentioned TM because it's the cheapest way to get a good plastic slide (people pay hundreds for 3D printed plastic slide for a reason). If you absolutely need metal slide, buy any you like and use until it breaks, changing only the bucking. The steel trigger sets are almost as expensive as the gun.
its Yan from Novritsch 😂
rly??
xDD
Im uk had mine a month
“Mark my word” LOLOL 老哥我喜欢你的口音和你的自信哈哈哈
不耐打，要改很多東西
Glock fan boy can't admit the 70 dollar gun whips glocks ass hands down lol
Funny%%%
By how it looks, it doesn't gonna last for much! The design it's weak, too many screws on plastic parts....
Mines lasted very well. On some sights you can get custom metal parts aswell