Nice video! I don't get the PCV part tho. Did he not have a PCV valve installed? I have a VTT valve installed but the hose is vented to atmosphere. Does the engine suck air in through there? I didn't want route it to the intake as i does have oil residue. Thanks!
he put a damaged pcv delete fitting where a brand new one was meant to be. also left it wide open so proper vacuum wasn't being pulled on the crank case causing an oil leak and oil burning. under vacuum is was sucking in unfiltered air allowing dust, dirt and grit into the valve cover. under boost it was also venting oil vapors right into the cowl filters and smoking at a stop. not good!
@@tony.nextlevelrides Oh ok I see. My car doesnt smoke but after I went single turbo the guy who installed my kit said it was fine just leave the flapper tube vented to atmosphere and not have to route a hose to the turbo intake.
Much better
I have replaced mine for digital, but i realy want to modify my oem cluster so i can swap sometimes.
good plan, I modified my old e90 one with white oem M bulbs and red needles. looked awesome.
@tony.nextlevelrides do you have any video on that?
I might make one soon for my 135i 🤔
@@tony.nextlevelrides I've been procrastinating for a year, might as well push it a lil bit more and wait for you 😋
Nice video! I don't get the PCV part tho. Did he not have a PCV valve installed? I have a VTT valve installed but the hose is vented to atmosphere. Does the engine suck air in through there? I didn't want route it to the intake as i does have oil residue. Thanks!
he put a damaged pcv delete fitting where a brand new one was meant to be. also left it wide open so proper vacuum wasn't being pulled on the crank case causing an oil leak and oil burning. under vacuum is was sucking in unfiltered air allowing dust, dirt and grit into the valve cover. under boost it was also venting oil vapors right into the cowl filters and smoking at a stop. not good!
@@tony.nextlevelrides Oh ok I see. My car doesnt smoke but after I went single turbo the guy who installed my kit said it was fine just leave the flapper tube vented to atmosphere and not have to route a hose to the turbo intake.
@geo335st flapper is fine, this one is the low side that would route into the valve cover.