Lessons learned from my own build (6 years old and going strong): 1) Grey electrical conduit is more resistant to UV and has a joint built in for connecting two fo them together. 2) Don't seam the PVC at the top of the curve - that is the highest stress point and is prone to failure... better to do 5', 10', 5' - a little more cutting and joints but the joints are down where there is little bending stress. 3) I bored holes in my 26 ridge beam and ran the PVC thru it - more work, but it supports 2,000 lbs of snow load in the winter.
Thank you for posting this video I have been trying to build a greenhouse for the last two years and could never find one that I truly like and can afford, I just wanted you to know that I built it and it turned out beautiful it is everything I needed thank you so much!
Hey guys, if you try this out, you can also use electrical PVC conduit (the grey stuff). It is more sun tolerant than the white is and should give you a longer lifespan. Also, make sure this is secured to the ground well. It can tolerate wind and sheds it off pretty well being rounded.
I retired 1 month before my 41st birthday (now 57). Have built many a hoophouse since then. A few points: 1) The white PVC will get brittle from UV in a year or so. You will get a few more years if the plastic blocks UV. What will happen is a strong side wind will distort the shape a little causing the pipe to snap and poke a hole through the plastic. Grey electrical PVC is UV protected and lasts much longer in a hoophouse. 2) strong winds will lift that thing like a kite. Many designs extend the pvc beyond the side boards anchored into the ground. You can also use a few screw anchors into the ground attached by cable to the side boards. Good luck and enjoy the hoophouse.
We absolutely love this video. We are taking your shopping list to a big box store tomorrow. One thing we didn’t see in either this video or part II is how to stretch and secure the plastic. Well keep an eye out for it in cSe you make one. Thanks again! (My growing partner loves your crystal clear construction instructions, while I love to watch you brand yourself with your motto about simple living, get better and better with the RUclips thing, and generally succeed in marketing as well as homesteading.)
Thank you !!! I have watched more videos then I can count. This is the first one that actually showed me how to build a door!!! I have 4 hoop houses and not one door...None of the other videos made sense to me. I love this! Your awesome!!!
For my hoops I reinforced the joints with something (I've forgotten what, either wood or PVC) inside the tubes and coupling. This gave me a smooth curve at the joints instead of a point.
what was the average internal temperature of the finished greenhouse during the winter. where im at, it gets pretty cold. so I was wondering what’s the difference between the outside temp and the inside temp. thanks.
I want to write an article on your desing. Can i use some screenshots from your video I will also give credits to ur channel. Hope I will get the permission.
Really like the design, I would like to build one as well. Have you ever thought about doing a follow up video on this, just to show how well it has held up over the years, and what you would do differently now vs. then. I live near Toronto, do you think this design would be sturdy enough to hold up against the weather here?
Thank you. You make it look easy but I doubt I can do it. I would love to have one but hey, can't always get everything you want. I hope you keep showing how to make things and maybe one day I'll make something out of wood. Keep on keeping on and be safe.
I need to do something like this and appreciate your video. I'll be REALLY interested in how it holds up over the winter. I'm worried about high winds primarily. Please update us in spring.
To prevent a wind storm from blowing it away I would stick a piece of rebar inside at the end of those pvc to the ground inside at least 5 inches so that if a strong storm comes along it won’t be blown away. I would stick it at each corner and mid section. I like your idea of your hoop house.
I built a hoop house but without all the wood, the PVC hoops sit on 1/2" by 2 foot PVC pipes driven into the ground. They are only about a foot into the ground (any further and it's all limestone). Winter frost left the whole thing with a lean. I wonder if rebar in a fluid ground and unyielding PVC might be a problem.
Our hoop house is similar. We used rebar on the inside of the frame, slipping the conduit over the rebar and also used the strapping anchors as well. This gave a nice smooth area on the outside to attach wiggle wire track to attach the plastic. We live in the northeast, and get very high winds from time to time (Ex: hurricane Sandy) and have had no problems, I think because the plastic is secured on pretty snug. We get snow as well, and have not had any issues, as we also have a 2x4 frame from the top of the doors across the length which adds a lot of support. And framed out 2x4 end walls. We wrapped the pvc with white duct tape to keep the pvc from degrading the plastic, but the tape is now degrading and flaking, and would instead paint the pvc to create a barrier if done again. The greenhouse plastic has lasted much longer than it’s rated lifespan as well. The greenhouse gets just as cold inside at night as the night outside temps, but during the day it really heats up especially in the sun, and keeps the ground from freezing. (zone 7). Nothing like being in the greenhouse in winter in a T-shirt, when there is snow outside.
FYI, It would be better (I think) to put the PVC bows on the inside of the structure (much more support/stronger). Also, would it be better to use metal brackets to hold the PVC, or would those rust? It seems like in time/cold climates, that the plastic ones might crack?
When framing the door frame, there is no need for the bottom rail. Instead find the center and toenail the verticals in place, This will allow for an even taller (1.75"?) door with less limber, Of course, you can cut a spacer 36.5" wide (marked at its center, held with a single screw to the base)) to help you place the verticals, then remove the spacer once the door frame is set in place and screwed down (toenail the screws).
Correct. The white pvc is intended to be buried underground where it gets no sunlight and is therefore not UV resistant. The gray electrical pipe has more above-ground use and often used outdoors and so is more resistant to sun damage. Will last years longer.
How would I further stabilize the thing to the floor if I live in an area that gets can get very windy?. I'm inland but at the top of a hill so we get some strong gusts now and then. I've seen video where he uses 3 foot piping larger than the main and digs it 2 ft into the ground and have 1ft sticking out and puts the top pipe into that pipe and puts a screw in to secure. Would that be something required for a windier place?
I hope you keep making videos when you move to Iowa (saw that in another video). I'm looking forward to using this video to make a greenhouse for us in Idaho Springs (we are also in Colorado) this year. If you ever want an afternoon getaway from Denver, send me a message. Would love to buy you a beer or lunch or something.
Is the plastic you use from amazon BPA free. A concern is leaching toxins into organic garden. Was unable to find any information on the type of plastic it is. Any ideas?
It is used for plumbing applications so i doubt it would be a BPA product. It also does not touch the soil so nothing would leach in to the surrounding.
I was looking for raised beds and you showed up. I like your green house. I started thinking that it could be extended the next year. Also I might put another 2X6 at the base so I could have a second canape for Michigan winters. I subscribed for more awesome ideas. Thank yo brother.
Theres no way this was 150$. In canada we just bought 2x4s x 8 and they were 5.50 each. That doesn't include clips, fasteners, plastic rolls in 50' sections are $60 each. You guys need to get realistic about prices.
Some omissions IMO. You didn't show putting up the PVC. How did that go? Screw in one bottom while the piece is standing in the air before screwing in one side at a time? Seems like it would be good to show in action. Second, not sure how you were able to cut out the notch on the 2" PVC pieces. Chop saw? That looks dangerous. How did you hold them in place while you cut the notch. How about putting the notched pieces onto the other PVC? Apparently the piece pulls open? How did you do that without breaking the pieces? Also, no problem with the PVC joint at the 10' point coming lose or breaking? I like the concept, but as far as instructions and a thorough showing you could have been more helpful I think.
Great Video,...... maybe not for all perfect, but full of ideas for their own projects. i couldn#t beleave why people made the fat fingers down ?????......Hey Guys,.....! so many details in here !
Thanks for your comment frank. There are certainly improvements that can be made, but at higher costs. Just trying to make a cost effective way to extend the growing season.
We invested in real estate and rentals. It has large gains, good tax benefits and relatively low maintenance. It also pays you twice: It pays you a monthly return (rent) and it appreciates (what other asset do you own that does that?) Here is my philosophy on retiring early: 1) Live below your means (don't get wrapped up in materialistic BS) In fact, better yet, LIVE. LIFE. SIMPLE 2) If you can't pay cash for it, don't buy it! (debt will kill you twice, it costs you interest and your "asset" is depreciating before you even own it!) 3) Never stop learning and educating yourself 4) Master your craft (it doesn't matter what it is, if you are the expert or the best at what you do, the income follows) 5) Get as much residual income as you can. Don't know what that is? "SEE #3"
@@thefreezedryingcommunity fantastic, true, real world advice, thank you! What part of Colorado are you in? My wife and I lived in Greeley for around 9 years. We really miss the state, there is some absolutely beautiful country out there. We loved going and staying at the Stanley Hotel in Estes Park. We would love to be able to come back one day.
![Kodak Black - Catch Fire [Official Music Video]](http://i.ytimg.com/vi/A4ch-olIuZo/mqdefault.jpg)
Lessons learned from my own build (6 years old and going strong):
1) Grey electrical conduit is more resistant to UV and has a joint built in for connecting two fo them together.
2) Don't seam the PVC at the top of the curve - that is the highest stress point and is prone to failure... better to do 5', 10', 5' - a little more cutting and joints but the joints are down where there is little bending stress.
3) I bored holes in my 26 ridge beam and ran the PVC thru it - more work, but it supports 2,000 lbs of snow load in the winter.
Thank you for posting this video I have been trying to build a greenhouse for the last two years and could never find one that I truly like and can afford, I just wanted you to know that I built it and it turned out beautiful it is everything I needed thank you so much!
Hey guys, if you try this out, you can also use electrical PVC conduit (the grey stuff). It is more sun tolerant than the white is and should give you a longer lifespan. Also, make sure this is secured to the ground well. It can tolerate wind and sheds it off pretty well being rounded.
The slip joints are easier to make by ripping the PVC on a table saw first and them cutting to length. Its safer too.
I retired 1 month before my 41st birthday (now 57). Have built many a hoophouse since then. A few points: 1) The white PVC will get brittle from UV in a year or so. You will get a few more years if the plastic blocks UV. What will happen is a strong side wind will distort the shape a little causing the pipe to snap and poke a hole through the plastic. Grey electrical PVC is UV protected and lasts much longer in a hoophouse. 2) strong winds will lift that thing like a kite. Many designs extend the pvc beyond the side boards anchored into the ground. You can also use a few screw anchors into the ground attached by cable to the side boards. Good luck and enjoy the hoophouse.
Thanks for the input, i am always looking to improve the design and quality. Congrats on retiring early.
Nor Kavon3
We absolutely love this video. We are taking your shopping list to a big box store tomorrow. One thing we didn’t see in either this video or part II is how to stretch and secure the plastic. Well keep an eye out for it in cSe you make one. Thanks again! (My growing partner loves your crystal clear construction instructions, while I love to watch you brand yourself with your motto about simple living, get better and better with the RUclips thing, and generally succeed in marketing as well as homesteading.)
Thank you !!! I have watched more videos then I can count. This is the first one that actually showed me how to build a door!!! I have 4 hoop houses and not one door...None of the other videos made sense to me. I love this! Your awesome!!!
You're very welcome!
How is it holding up 3 years later with your wind and snow
For my hoops I reinforced the joints with something (I've forgotten what, either wood or PVC) inside the tubes and coupling. This gave me a smooth curve at the joints instead of a point.
Bamboo
Very cool you add the shopping list you’re the first one I see doing this very helpful for beginners like me 👍
you could also just use a footlong piece of rebar for each pvc piece
what was the average internal temperature of the finished greenhouse during the winter. where im at, it gets pretty cold. so I was wondering what’s the difference between the outside temp and the inside temp. thanks.
Please use caution when using a miter saw on small cuts. You can always make a jig for a table saw or similar and not have to work close to the blade.
Perfect and simple build. 👍👍👍
I want to write an article on your desing. Can i use some screenshots from your video I will also give credits to ur channel. Hope I will get the permission.
I am waiting for your response
Sure you can share it
Really like the design, I would like to build one as well. Have you ever thought about doing a follow up video on this, just to show how well it has held up over the years, and what you would do differently now vs. then. I live near Toronto, do you think this design would be sturdy enough to hold up against the weather here?
I love this !! I'm gonna build one for myself. Thank for the great idea.
Is this Mary the truck driver?
Excellent design.
✌
Thank you. You make it look easy but I doubt I can do it. I would love to have one but hey, can't always get everything you want. I hope you keep showing how to make things and maybe one day I'll make something out of wood. Keep on keeping on and be safe.
Just use 16 ' cattle panels then you can let your vining plants climb during the summer
I need to do something like this and appreciate your video. I'll be REALLY interested in how it holds up over the winter. I'm worried about high winds primarily. Please update us in spring.
I will do an update after the winter. Its not real windy where i live but i think this could be sturdier with a few modifications.
I'm going to use this video for my bed time story
Great video I almost finished my hoop house. Your vide was very helpful.
That's great!
How much do you cut out of the pvc for slip joints ?
To prevent a wind storm from blowing it away I would stick a piece of rebar inside at the end of those pvc to the ground inside at least 5 inches so that if a strong storm comes along it won’t be blown away. I would stick it at each corner and mid section. I like your idea of your hoop house.
I built a hoop house but without all the wood, the PVC hoops sit on 1/2" by 2 foot PVC pipes driven into the ground. They are only about a foot into the ground (any further and it's all limestone). Winter frost left the whole thing with a lean. I wonder if rebar in a fluid ground and unyielding PVC might be a problem.
Our hoop house is similar. We used rebar on the inside of the frame, slipping the conduit over the rebar and also used the strapping anchors as well. This gave a nice smooth area on the outside to attach wiggle wire track to attach the plastic. We live in the northeast, and get very high winds from time to time (Ex: hurricane Sandy) and have had no problems, I think because the plastic is secured on pretty snug. We get snow as well, and have not had any issues, as we also have a 2x4 frame from the top of the doors across the length which adds a lot of support. And framed out 2x4 end walls. We wrapped the pvc with white duct tape to keep the pvc from degrading the plastic, but the tape is now degrading and flaking, and would instead paint the pvc to create a barrier if done again. The greenhouse plastic has lasted much longer than it’s rated lifespan as well. The greenhouse gets just as cold inside at night as the night outside temps, but during the day it really heats up especially in the sun, and keeps the ground from freezing. (zone 7). Nothing like being in the greenhouse in winter in a T-shirt, when there is snow outside.
FYI, It would be better (I think) to put the PVC bows on the inside of the structure (much more support/stronger). Also, would it be better to use metal brackets to hold the PVC, or would those rust? It seems like in time/cold climates, that the plastic ones might crack?
The exact same thing I was thinking, great minds think alike 👍
It may add some expense, but, why not use 2x2 instead of ripping 2x4s?
When framing the door frame, there is no need for the bottom rail. Instead find the center and toenail the verticals in place, This will allow for an even taller (1.75"?) door with less limber, Of course, you can cut a spacer 36.5" wide (marked at its center, held with a single screw to the base)) to help you place the verticals, then remove the spacer once the door frame is set in place and screwed down (toenail the screws).
Thanks for the tip charles
I heard PVC gets brittle
That the Grey electrical has UV protect ion
shanah Tovah nice I’ll have to remember that when I build one myself!
Correct. The white pvc is intended to be buried underground where it gets no sunlight and is therefore not UV resistant. The gray electrical pipe has more above-ground use and often used outdoors and so is more resistant to sun damage. Will last years longer.
How would I further stabilize the thing to the floor if I live in an area that gets can get very windy?. I'm inland but at the top of a hill so we get some strong gusts now and then. I've seen video where he uses 3 foot piping larger than the main and digs it 2 ft into the ground and have 1ft sticking out and puts the top pipe into that pipe and puts a screw in to secure. Would that be something required for a windier place?
Great video but your cost estimates do not include greenhouse plastic costs which for me were over 100 dollars.
...think like a carpenter: rip (cut the long way) the slot on a length of pvc, THEN chop into short segments. Keep your fingers.
🤚
🚑you're right
Very good job!
How's the PVC holding up? I heard that it becomes real brittle after a while in the sun and snaps.
Bravo gari,well done! ;-)
I purchased a greenhouse for less than $200.00 on Amazon, galvanized piping.
my dogs LOVE ur opening :)
I hope you keep making videos when you move to Iowa (saw that in another video). I'm looking forward to using this video to make a greenhouse for us in Idaho Springs (we are also in Colorado) this year. If you ever want an afternoon getaway from Denver, send me a message. Would love to buy you a beer or lunch or something.
Those plastic clamps will become brittle and break in time. Swap for the metal ones.
you should of put tubing on inside. would of given a smoother finish when you come to put plastic over.
darren gowland how long has this lasted? Still holding up? Does it get windy or heavy snow fall where you are?
...great job overall...would like a brick or stone foundation tho anything to get the wood up off the ground...zone 6 here...
Is the plastic you use from amazon BPA free. A concern is leaching toxins into organic garden. Was unable to find any information on the type of plastic it is. Any ideas?
It is used for plumbing applications so i doubt it would be a BPA product. It also does not touch the soil so nothing would leach in to the surrounding.
sorry my english is poor, but how much area did the greenhouse costs? also what about the height?
i wonder how long it was before he regret using plastic "hoop stabilizers"
I was looking for raised beds and you showed up. I like your green house. I started thinking that it could be extended the next year. Also I might put another 2X6 at the base so I could have a second canape for Michigan winters. I subscribed for more awesome ideas. Thank yo brother.
Thank You
What size pvc pine do you use for the slip joint?
Looks good, but did it survive the first storm? How is it today?
I have a question... did you rip the 2x4x8's to get the door frames?
Can you get away with 1/2 inch PVC pipe or does it need to be 3/4 for any specific reason?
1/2" will not be strong enough over the large span. I would do at least 3/4
Theres no way this was 150$. In canada we just bought 2x4s x 8 and they were 5.50 each. That doesn't include clips, fasteners, plastic rolls in 50' sections are $60 each. You guys need to get realistic about prices.
where is your list of materials...plus how did you cut the small spacers,,??
The list of materials is in the description. Cut the spacers using a jig (table saw or miter)
what about the plastic?
very nice
Why did it have to be exactly 10X10 ? Can't it just be whatever the boards are without cutting them ? Thanks 😊
That was amusing how hard he tried to keep that dimension. Nothing would be square if you used them as they come since their lengths vary.
ARE THESE 1/2 BY 10 OR 1IN/10 YOU NEVER SAID THIS HOME DEPOT PVC ?
3/4 from lowes
Some omissions IMO. You didn't show putting up the PVC. How did that go? Screw in one bottom while the piece is standing in the air before screwing in one side at a time? Seems like it would be good to show in action. Second, not sure how you were able to cut out the notch on the 2" PVC pieces. Chop saw? That looks dangerous. How did you hold them in place while you cut the notch. How about putting the notched pieces onto the other PVC? Apparently the piece pulls open? How did you do that without breaking the pieces? Also, no problem with the PVC joint at the 10' point coming lose or breaking? I like the concept, but as far as instructions and a thorough showing you could have been more helpful I think.
24 would be the correct number.
Boss good job ... I just love the frugality
One 50mph gust=Goodbye
A wonderful video. I will build this using your video. How much plastic will I need. What length and width?
What was the door made out of? The 2x4x8?
I like the tall raised bed at the end of the video those ai want to see how it was done!
Not grommets or pvc holders, they are actually pvc pipe straps. Also 4 straps per hoop equal 24, not 22.
How did you do the plastic cover?
You are retired at 40 I’m 34 and far from it so I’m looking for some hints. Sub’d 🙏
👍
Great Video,...... maybe not for all perfect, but full of ideas for their own projects. i couldn#t beleave why people made the fat fingers down ?????......Hey Guys,.....! so many details in here !
Thanks for your comment frank. There are certainly improvements that can be made, but at higher costs. Just trying to make a cost effective way to extend the growing season.
Thanks for the vid. Am I missing part 2?
Yes there is a Part 2
ruclips.net/video/HWeCGdwJU88/видео.html
great design, do be carefull with saw blades
Thank you!
how did you retire at 40?
We invested in real estate and rentals. It has large gains, good tax benefits and relatively low maintenance. It also pays you twice: It pays you a monthly return (rent) and it appreciates (what other asset do you own that does that?)
Here is my philosophy on retiring early:
1) Live below your means (don't get wrapped up in materialistic BS)
In fact, better yet, LIVE. LIFE. SIMPLE
2) If you can't pay cash for it, don't buy it! (debt will kill you twice, it costs you
interest and your "asset" is depreciating before you even own it!)
3) Never stop learning and educating yourself
4) Master your craft (it doesn't matter what it is, if you are the expert or the best at what you do, the income follows)
5) Get as much residual income as you can. Don't know what that is? "SEE #3"
@@thefreezedryingcommunity fantastic, true, real world advice, thank you!
What part of Colorado are you in? My wife and I lived in Greeley for around 9 years. We really miss the state, there is some absolutely beautiful country out there. We loved going and staying at the Stanley Hotel in Estes Park. We would love to be able to come back one day.
why not use t's or crosses along the top for x-tra support, the nickname stubby is not a good one to have
Good, 👌👍💪👏👏👏👏🐕🇺🇸🇷🇺!!! 🎅🌲!
i use cheese to stabilize my poops
good plan, don't over stabilize
is your family also going to use the poop house? cause thats just weird...
no silly that's what a shovel is for
Cool Ass VIDEO!
"Grommets" - sound like some ugly little creature that comes to your garden in the middle of the night to eat your vegetables!
sounds like an 80s movie!
👹🧟♂️
👍