I've been watching instructional vids for over a year and this was the equal best ever, simplified tutorial ever. Nice bit of lesson planning and very well presented. Thanks. you actually helped not only me but I'm sure many more.
You made my wife give me a proper stare! I was on the fence of upgrading my Ableton Intro to Standard for mastering parts of my music collection, and this video did it for me. Now I have to explain to her why dropping some cash was well worth it ;-)
Great explanation of how to actually use each effect and what each part does! I have watched about ten tutorials and i still had no idea what anything was actually doing. This helped out so much!
I was looking for videos on mastering in ableton and couldn’t find many valid ones. This is the first one I am liking a lot (even though it still sounds complicated to me)
This is now my go-to guide for mastering - thanks. I was wondering if you need to add a glue compressor to the end though, just to tighten up the overall sound?
very insightful. usually, I'll get frustrated with vids like this because it's a lot of BS semantics, this vid was spot on. may I add 1 suggestion, when using your busy spot in your track for continued reference of sound, your control group,per say, use the loop function for precise reference. there was a moment in the video when the reference section veered off into another section, slightly off putting. however, fantastic video mate! cheers.
gotta say this is a well done mastering chain the only problem is tho if your not carefull you can cut off some of your bass especially if its its in the low end
Is there any way I can still get a clean master with Ableton live 9 I don't have all the extra audio effects and instruments like you do I only have what Ableton give you when you first get it let me know man im a totally independent artist and I do all audio engineering myself.
easily the most helpful mastering tutorial I have watched, I have been studying this topic for three years and found some new tricks in this video I have never seen before. The stereo widening trick is amazing! One question though, what is the point of adding the limiter at the end of the chain if you're already reducing the output volume in the VU meter?
Because that way it is even more precise to see and balance the Limiters peaks when the volume is about to hit the ceiling even by a tiny amount. That also helps with the overall balancing and helps to avoid distortions. I think that is the reason but not sure tho.
Great video! Thank you dude. I'm still confused why you chose to do the vu meter gain instead of using the limiter gain? I just need to know why for my own purposes. Doesn't it accomplish the same task? Are you just doing so to be in VU units for your own reference?
Ableton is brilliant the way it handles racks, I wish Logic had a similar function, I have to use a 3rd party plugin to get mono compatible widening. The struggle is real ;)
So like you're doing this to a completed audio track -- does that imply that its unnecessary to add effects to individual tracks of midi or samples? Perhaps I've been approaching mastering all wrong.
Hello there, i saw this on KVR, and this has been my first attempt at learning what exactly mastering is,and i think you did a great job explaining. But I do have a question for you. You seemed to randomly pick a spot in your song at the beginning and continued to use just this one spot for this whole video. Is there any rhyme or reason to it that i didnt pick up?
It was a busy section in the song that had the most instruments going. When stuff is quiet it's ok for it to be quiet, but when it's loud it needs to be controlled. You would definitely make sure the whole song fits well together, but honestly that's a mixing issue. Dynamics (Quiet/Loud) are important to the feeling of a song, so be gentle with your compression, let your track breath. Control the heavy stuff. Hope that helps :)
I f*cking hate mastering- I’m just lucky to have a mate who’s really good at any mastering and mixing anything I throw at him. Just my opinion but mastering is a whole skill all on its own - and it’s hard to find someone who is good at writing, composing, mixing AND mastering... maybe I just need better software for this purpose, dunno ?!?
who has been blind their whole life and can finally see. I can't express my gratitude in words but tNice tutorials is the best I can do. THANK YOU SO
I've been watching instructional vids for over a year and this was the equal best ever, simplified tutorial ever.
Nice bit of lesson planning and very well presented.
Thanks. you actually helped not only me but I'm sure many more.
I realize it's quite off topic but does anyone know of a good website to watch newly released movies online ?
@Harlem Julian i use FlixZone. You can find it on google =)
@Seth Reginald Definitely, have been using FlixZone for since april myself :D
@Seth Reginald thanks, I went there and it seems like a nice service =) I really appreciate it !
@Harlem Julian you are welcome =)
I can't thank you enough... hands down the best video for beginnners
You made my wife give me a proper stare! I was on the fence of upgrading my Ableton Intro to Standard for mastering parts of my music collection, and this video did it for me. Now I have to explain to her why dropping some cash was well worth it ;-)
Great explanation of how to actually use each effect and what each part does! I have watched about ten tutorials and i still had no idea what anything was actually doing. This helped out so much!
An excellent tutorial. I'm sad to see you don't make them anymore, because they are great. Thanks for the help.
Wicked video mate, massive help during lockdown whilst still learning live 9. Absolute G - big up from Luton (London) UK
I was looking for videos on mastering in ableton and couldn’t find many valid ones. This is the first one I am liking a lot (even though it still sounds complicated to me)
How do u know whats not valid if u dont know about mastering lol
Only thorough explanation of mastering that I have come a cross on RUclips that is easy to understand. Very helpful!
When the limiter kicked in , all I could say was “Haaaaaaaaaaaaa!!!! “ (repeatedly).
Great information here!!! Thank you!
This is now my go-to guide for mastering - thanks. I was wondering if you need to add a glue compressor to the end though, just to tighten up the overall sound?
Thanks so much for this. First time mastering and I felt confident throughout the process.
very insightful. usually, I'll get frustrated with vids like this because it's a lot of BS semantics, this vid was spot on.
may I add 1 suggestion, when using your busy spot in your track for continued reference of sound, your control group,per say, use the loop function for precise reference. there was a moment in the video when the reference section veered off into another section, slightly off putting. however, fantastic video mate! cheers.
Good advice
basics it's encouraging to learn a little bit more! Well done!
Excellent video ... makes me wonder why I shelled out on Ozone 8!!!! Going to be putting this into practice straight away. Nice one!!😀
Thanks man, this was my first attempt! Good video for someone thats not ever tried to master, pretty easy to follow and understand.
This song is a jam, and this video - very helpful. Thank you!
BROTHER, YOU ARE THE BEST!!! You oooh really helped me!! THANK YOU VERY MUCH!
Thorough....dug the use of utility and the calibrating of the VU meter.
Great Video. Watched and re watched and learned so much. I've been using ableton for years.
Thankyou very much by the way for your pace and your insight and your teaching and your examples !!!! Much Appreciated !!!!
Great video! Made me further improve my mastering rack. Thank you!
Thank you so much this helped a lot!!!! You saved my life
Great stuff mate! Not too easy..not too hard. Thanks for the knowledge!!
Awesome vid. You should make this rack and share it for us noobs.
I'm a normal person. thanks
gotta say this is a well done mastering chain the only problem is tho if your not carefull you can cut off some of your bass especially if its its in the low end
Is there any way I can still get a clean master with Ableton live 9 I don't have all the extra audio effects and instruments like you do I only have what Ableton give you when you first get it let me know man im a totally independent artist and I do all audio engineering myself.
Woah, great video mate!
Спасибо огромное! За Ваш труд и Ваши видео уроки!
It's a lot easier than I expected honestly.
easily the most helpful mastering tutorial I have watched, I have been studying this topic for three years and found some new tricks in this video I have never seen before. The stereo widening trick is amazing! One question though, what is the point of adding the limiter at the end of the chain if you're already reducing the output volume in the VU meter?
Because that way it is even more precise to see and balance the Limiters peaks when the volume is about to hit the ceiling even by a tiny amount. That also helps with the overall balancing and helps to avoid distortions. I think that is the reason but not sure tho.
@33:33 were loud.. that was dope, thanks for the simplified version!
make my first ever drum loop. I'm not and expert at soft yet but I have learnt a lot at producing and looking back at my journey, I just
This was so helpful!! Thank you
Great video. Learned some new concepts
Hey! Thanks so much for this video!
Great video! Thank you dude. I'm still confused why you chose to do the vu meter gain instead of using the limiter gain? I just need to know why for my own purposes. Doesn't it accomplish the same task? Are you just doing so to be in VU units for your own reference?
Can I import my softs into soft soft and process without using a mic
do you have a tutorial on how to loop drums,app, etc.
great tutorial! thank u!! any ableton built-in alternatives for the VUMTDUO?
thanks, it actually let me through so i could download it.
That width technique is genius. Using that 'Utility' tool can reduce mono compatibility issues.
Ableton is brilliant the way it handles racks, I wish Logic had a similar function, I have to use a 3rd party plugin to get mono compatible widening. The struggle is real ;)
So informative, thanks a lot!
Thank you, it works perfect!
Thanks for lesson number one I'm going to leave ssages on a few of your posts and maybe even a few links to soft I make in the
What is he actually calibrating on the vu meter? What is the -10dB?
Nice tutorial! The quality of my production heaps better. Thanks :)
How would you go about getting the kick drum to be more pronounced? Cheers
Amazing educational video, thank you
thanks a lot!!! so nice reverb
Thank you! It helped a lot.
TL;DR 36:20
is there any template already done to download? thank you ;)
THANK YOU! Used this video to manually master my first track without using a preset haha
Great work men
Your music sounds good
yo bro, really thankya. Big respect
thank you so much dude you're a god
You had me at "normal" people..
Well to be fair shape of you lody softs just like the first random notes that popped into Nice tutorials head
It's just awesome
EXCELLENT!!THANKXX!!
So like you're doing this to a completed audio track -- does that imply that its unnecessary to add effects to individual tracks of midi or samples? Perhaps I've been approaching mastering all wrong.
Adding compressors or EQ to individual channels is usually done in the mixing phase I think
Thank you for demystifying Mastering for me
Thanks for this vid !
Couldn't you just put the saturator before the first chain of EQ/MultibandCompressors?
good question!
GOD!!!My broo
I have a prediction that in the future soft soft is going to have a assistant like ozone 8 or sotNice tutorialng lol
which ableton is used in this video,?
Hello there,
i saw this on KVR, and this has been my first attempt at learning what exactly mastering is,and i think you did a great job explaining. But I do have a question for you.
You seemed to randomly pick a spot in your song at the beginning and continued to use just this one spot for this whole video.
Is there any rhyme or reason to it that i didnt pick up?
It was a busy section in the song that had the most instruments going. When stuff is quiet it's ok for it to be quiet, but when it's loud it needs to be controlled. You would definitely make sure the whole song fits well together, but honestly that's a mixing issue.
Dynamics (Quiet/Loud) are important to the feeling of a song, so be gentle with your compression, let your track breath. Control the heavy stuff. Hope that helps :)
Worked, thx
Thank you so much for this clip!
I f*cking hate mastering- I’m just lucky to have a mate who’s really good at any mastering and mixing anything I throw at him.
Just my opinion but mastering is a whole skill all on its own - and it’s hard to find someone who is good at writing, composing, mixing AND mastering... maybe I just need better software for this purpose, dunno ?!?
are you still interested in mastering ?
@@KEY4one I am
send a mail to n.e.noiz@web.de @@BiomechaWolf
thanks man this was super helpfull
thank you bro thank you
Earned a sub from me :) Please do more of these
merci beaucoup a toi :))
please master this clip. sound is very low. listening in my car..
🙏🙏🙏
have too many proprietary restrictions on the user and I want more freedom in importing and exporting projects, soft and video editing
No compression for mastering?
Omar Barrios But there is tho?
has anyone ever co up with such a good lody, and forget it seconds later
can't your the voice explanation.. lack of volume :s
ikr!
Yes sort of but I reccond setupxx
Great
Muy bueno
Wow
This guy is obsessed with kissing. On a more serious note, thanks for the tips man.
Thank you...
Kino Cartoon thanks
you!
Help! I'm not normal but I know how to normalise!
ima get lit now
I love the tittle of the video lol
and it softs like a normal honest opinion. I get that so of you are joking, but could you please let it be. I
Don't try to make s imdiately. That's where you guys go wrong. You make noise. Just play with it and sculpt softs live... after
Don't put water on it !
your accent made this way better to listen to odee