Thanks for the comment! I totally get where you're coming from-it can definitely feel a bit daunting to take on a project like this, especially with something as delicate as the Beosound 3000. My goal is to make the process as clear as possible, but I completely understand if you'd rather leave it to the experts. If you ever do decide to tackle it yourself, just take your time and follow the steps carefully!
Hello! To fix the wire for the door, first make sure the wire is properly aligned. You can remove it by gently detaching it from its attachment points, then reattach it securely in place. If you need a step-by-step guide, let me know and I can walk you through the process.
We had a lightning stuck very close to our house and our electrical circuit in the house got ovrecharged and it seems like it hit my Beosund 3000. Does it have a fuse that can be changed or is it much worse. Thing is the quipment does not start up.
Thank you for your message. Sounds like the power supply board got defective doing the lightning. Send us a e-mail to contact@kosetrading.com then we can supply your the new power supply board for your Beosound 3000
My ouverture mk1’s glass doors sometimes stays open depending on doors opening speed. And sometimes it works perfectly. What can i do in this situation.
Hi, liked your detailed video. We have a Beosound 3200, unfortunately the doors are sticking, is there are 'simple' way how can we rectify this? Regards
If you remove the back cover before pulling out the front black panel, it would be much easier, and can avoid breaking the clips. By removing the back cover your side clips are free to push outwards and can remove it easily.
You’re absolutely right! It might look impossible at first, but with a bit of patience and following the steps, it all comes back together perfectly. If you ever give it a try, feel free to ask if you need help-I’m here to guide you
@@rafaldanielski5660 I see! For restringing the Beosound 3000, here's what you can do without fully reassembling everything: Open the panel: Gently open the panel or access area where the string needs to be threaded. Thread the string: Insert one end of the string through the designated hook or wheel, ensuring it’s aligned correctly. Pull through: Slowly and carefully pull the string through to the other side, avoiding any tangles. Tie off: Once the string is in place, tie it securely, making sure it’s not too tight but with enough tension to keep the mechanism functional. Test the string: After it’s threaded, gently pull on it to test the tension and ensure it moves smoothly. If you need a more detailed guide or encounter any issues, feel free to reach out, and I'll be happy to assist further!
You’re a saint for making these videos btw.
Thank you.
very nice work my man
Thank you
I really don’t know if I feel more or less comfortable doing this on my own let alone having you doing it either! 🙈😂
Thanks for the comment! I totally get where you're coming from-it can definitely feel a bit daunting to take on a project like this, especially with something as delicate as the Beosound 3000. My goal is to make the process as clear as possible, but I completely understand if you'd rather leave it to the experts. If you ever do decide to tackle it yourself, just take your time and follow the steps carefully!
Hello how do you fix the wire for the door again? Set in on place, you show how you can take it off? Kind regards Torben 🙂
Hello! To fix the wire for the door, first make sure the wire is properly aligned. You can remove it by gently detaching it from its attachment points, then reattach it securely in place. If you need a step-by-step guide, let me know and I can walk you through the process.
Hi dear sir, i need your help.i have beosound ouverture type 2636.And the front glasses of them are broken.
26:10 .
Thank you for your comment. Yes, I can send your the size. Send us the e-mail and we can provide you the information.
@@KoseTrading please may you please give me your mail address.Thank you very much.
My doors won’t open and just make a screeching sound. Think it’s just the belt?
The problem can be many different factors, but send us a e-mail and we can help you
We had a lightning stuck very close to our house and our electrical circuit in the house got ovrecharged and it seems like it hit my Beosund 3000. Does it have a fuse that can be changed or is it much worse. Thing is the quipment does not start up.
Thank you for your message.
Sounds like the power supply board got defective doing the lightning. Send us a e-mail to contact@kosetrading.com then we can supply your the new power supply board for your Beosound 3000
My ouverture mk1’s glass doors sometimes stays open depending on doors opening speed. And sometimes it works perfectly. What can i do in this situation.
What is the service history?
@@KoseTrading I don’t know i bought it as a second hand. But they changed the tape rubber. That’s all i know
Hi, liked your detailed video. We have a Beosound 3200, unfortunately the doors are sticking, is there are 'simple' way how can we rectify this?
Regards
Thank you for your comment, I will first change the belt for the door mechanism. That will solve your problem.
@@KoseTrading Thank you. Are you in the UK?
@@glenwood4228 No, we are based in Copenhagen. Denmark
Det er en god video :)
Thank you :)
If you remove the back cover before pulling out the front black panel, it would be much easier, and can avoid breaking the clips. By removing the back cover your side clips are free to push outwards and can remove it easily.
Yes, that's process can also be done by removing the back cover first. Good idea to avoid for breaking the clip.
im pretty sure mate no chance putting all back !!! no chance
You’re absolutely right! It might look impossible at first, but with a bit of patience and following the steps, it all comes back together perfectly. If you ever give it a try, feel free to ask if you need help-I’m here to guide you
@@KoseTrading Superb !so first how to put string back..I don't want assemble all of it but I have problem with the string
@@rafaldanielski5660 I see! For restringing the Beosound 3000, here's what you can do without fully reassembling everything:
Open the panel: Gently open the panel or access area where the string needs to be threaded.
Thread the string: Insert one end of the string through the designated hook or wheel, ensuring it’s aligned correctly.
Pull through: Slowly and carefully pull the string through to the other side, avoiding any tangles.
Tie off: Once the string is in place, tie it securely, making sure it’s not too tight but with enough tension to keep the mechanism functional.
Test the string: After it’s threaded, gently pull on it to test the tension and ensure it moves smoothly.
If you need a more detailed guide or encounter any issues, feel free to reach out, and I'll be happy to assist further!
poor beosound...
It's only for learning :)