Solidworks simulation | Pressure vessel testing in Solidworks

Hello, all welcome to the channel in this video I talked about how to make pressure simulations, how to check whether our vessel is ready for that type of pressure or not, and the discussion of the factor of safety also.
Here I made a vessel and applied alloy steel material in simulation I applied pressure inside of the vessel which is 9 Mpa and run the study. I got the result for 9 Mpa which shows the applied pressure is more than the yield strength and the factor of safety is also below the 1, the factor of safety has to be more than 1, so I can do applied less pressure or changes the design or also material, for this case I change the pressure that 5 Mpa and run the study again so here I get good and safe results and also the factor of safety is more than 1.
Outcome: Here I did a pressure simulation, If you got the fail or unsafe results then you have to change the applied pressure or you can change the design of the vessel or it is material for a safe result.
Here are more simulation tutorials links below
Solidworks simulation | Thermal simulation on solidworks | Transient
• Solidworks simulation ...
Here is the link for thermal analysis for an IC engine.
Solidworks simulation | How to make Thermal study in Solidworks
• Solidworks simulation ...
Here I am sharing more simulation video links that are also related to real-life examples
Solidworks simulation | How to make Torque simulation in Solidworks
• Solidworks simulation ...
Solidworks simulation | How to make drop test in Solidworks | FLEXIBLE TARGET
• Solidworks simulation ...
Solidworks simulation | How to find drop test in Solidworks | use of gravity
• Solidworks simulation ...
Solidworks Simulation | How to make DROP TEST in Solidworks | use of Velocity
• Solidworks Simulation ...
Solidworks Simulation | Tensile test simulation in Solidworks
• Solidworks Simulation ...
Solidworks Simulation | How to do compressive test in Solidworks
• Solidworks Simulation ...
Solidworks Simulation | How to find FACTOR OF SAFETY in Solidworks
• Solidworks Simulation ...
-----------------------------------------------------------------------------------------------------------------------
LIKE, SHARE, AND SUBSCRIBE TO THE CHANNEL
-----------------------------------------------------------------------------------------------------------------------
Thank you
#solidworks
#solidworkssimulation
#solidworksanalysis
#pressuresimulationonsolidworks
#pressureanalysisonsolidworks
#pressureanalysis
#pressurestudy

[@Pal-Tech]

Good ❤

[@samuda6958]

Good videos👍🏻👍🏻👍🏻, @tenun channel

[@divyeshdodiya7853]

Awsome study

[@SumitKumar-il4xx]

Good effort 👍

[@divyeshdodiya7853]

Nice video

[@hailey5542]

Nice one 👍🏻

[@illuminateddreams9503]

Cool video👍

[@divyeshdodiya7853]

Amazing

[@divyeshdodiya7853]

Good

[@ManojKumar-lv5qo]

Excellent

[@farimalik2938]

Good 👍

[@cookingwithwillskitchen5619]

Nice

[@Kb.276]

👍👍

[@FamAyusVlogs]

👍👍👍

[@sanamaqbool6573]

✌✌

[@BIBILICIOUS-]

How did you design this?

[@artist0099]

This is designing software name is solidworks, or u can many more things after design

[@krishnajagadeesh6307]

Facts of safey 1.5
My design how much coming is pass

[@artist0099]

Hi, If u apply 5 Mpa and u will get factor of safety 1 it means yr system will get 5.01,5.05,5.1 Or more Mpa value than yr vessel will fail, factor of safety show ( 5Mpa that is max. Pressure For yr vessel that time if u r getting FOS is 1 if u add more pressure yr vessel will fail)
Here It means FOS 1= 5Mpa
FOS 2= 10Mpa
FOS 3= 15Mpa
FOS 4= 20Mpa
EXAMPLE,, If FOS 1=10Mpa
If u r getting FOS 1.5 that means yr vessel can stand 15Mpa, after 15Mpa yr vessel will fail
FOS 1.5 OR 2 IS OK

[@krishnajagadeesh6307]

Fos maximum 1to 1.2 it's pass right sir

[@krishnajagadeesh6307]

Your provide online training class I'll pay for it

[@krishnajagadeesh6307]

Please send your contact number sir

[@artist0099]

Need minimum FOS 1.5

[@divyeshdodiya7853]

New thing

[@vishalpathania1994]

Amazing

[@alihaidar1868]

Amazing