Dude, I’m with you. I never even saw this gun coming but was stoked when it dropped. Especially with the Tac Ops. Been carrying for about 6 months. I’ve even carried it on jobs. I was considering an aftermarket slide to get around the comp of the original macro. 17 rounds! Absolutely fantastic. Got about 800 rounds through mine with one failure, which was probably the tension in the new mags. That’s what I was on the range sorting out in the first place. Sig knocked this one out of the park. Thank you for your thoughts on this one. I always respect your thoughts and opinions. 🙏🏻
Do you have an optic on yours? I just saw a review that said the rear sights will NOT come off. Which takes out a good amount of options for optics. Thanks
@@QUEST_4_FREEDOM rear sight should def come off by traditional drifting. The rear sight channel is cut separate from the optic channel. To add a different optic outside of their spec is going to require custom milling. I’m running the Holosun EPS currently.
Thank you for your response. I'm the first to admit, I'm new to optics and Optic cuts and all of that. I read that in a review. It may be on Palmetto State Armory website I believe. I was about to get a Holosun HE407K-GR X2 6 Red Dot Reflex Sight 1x and then I saw that review and now I don't know what to do
It is weird too because I have youtubed and searched for Tacops p365 macro with Optics and I don't know if it's my head or what but it seemed like those had less optics on them than the other options for p365's
Armory Craft Ultimate Trigger Spring Kit. It's only $20 and cleans the creep and mush out of the trigger, makes it feel slightly lighter and has 100% reliability from my testing and their claims. It does take a little work to install because you have to disassemble a good bit of your FCU and striker. Wasn't too difficult with limited tools.
Awesome review! I am 6'9" and also currently carry a Glock 19 Gen 5 MOS. I really want to get The X-Macro TACOPS. I'm pleased to hear the positive review coming from a big guy like myself!
First firearm I bought was the sig 1911 TTT. NEVER had an issue or malfunction. This was an extremely informative video. I’ll be purchasing the p-365 next.
Nice review. Thanks for the sight recommendation. I currently have the Sig suppressor height sights with the Holosun 507k and it takes up too much of the window. I also have the Mcarbo trigger installed, it takes up alot of pretravel check them out. It was not too much of a pain to install.
Nice details! I'm really stoked about the smallest P365, since I pocket carry and find the small grip quite comfortable. With a 17rd mag for the reload, and I'm a happy CCW! For those interested, adding a thumb safety is dead easy; it will pop right into the circular cutout at the back of the trigger module. The hardest part will be cutting a safety slot in the grip module, if a notched grip is not available to fit the owner's preference
I saw the P365 X-Macro and was impressed with the size and capacity, but not a fan of the "comp". I love my X-Compact P320, but when I saw a video of a build I thought 🤔, "If only they made this no "comp" version direct from the factory". Then I realized my prayers were answered before they were even sent. No "comp" a longer barrel, extended controls, and an easier conceal than my P320 with the WC Carry 2 grip. This will be my EDC for the foreseeable future. The EPS Carry with the direct mount screws feels like a cheat code. Now to follow up on the recommended Armory Craft P365 Ultimate Master Spring Tuning Kit.
The P320 XCompact was already a G19 killer, when the P365 XMacro out, it just became embarrassing, it's hands down probably the best 9mm hi-cap carry pistol on the market today.
@@MercyBlack137 Dude don’t beat the dead horse again. Look up how many silent recalls and upgrades Glock had throughout the 90s including slamfire incidents. Don’t have a double standard.
I carry one in the chamber. definitely hard to rack the slide with a full mag. Hoping it would just break in. Love the tacops with a longer barrel vs the macro comp.
Hey Man, great review as usual. Any word on Wilson Combat Grip Module or potential 365 X-Macro Tacops evolution like Equinox, Classic, Scorpion, AXG Grip or Legion? Thank you........
I have a stock p365 and just ordered this. Gonna swap the slide and fcu into that smaller frame for when I wanna carry that. Will also get EPS carry MRS green as well so I’ll had an optic to use
Where are you putting your support hand when your fingers are wrapping all the way around that narrow grip; is there any room on the grip for your support hand?
Was looking at one of these and a g45 about 3 months when deciding on a new ccw. It was a hard decision but i went with the g45 due to it being about $80 less and having a better finish for southern weather.
I have a 19X and would consider myself more of a Sig guy. The 19X is by far the best gun I have and I shoot it better than any of my Sigs. I like the 19X so much I think I need a G45.
cant blame u alot of guys who been shooting the tacops been slowly switching back to the 19 or g45 considering finish and the gun malfunctioning after so many rounds the control unit wears out after so many rounds run through them big issue with the p320 also and the finish on mine is just sub par even the the gun is thinner i cant really tell the difference in carrying my 19 or the tac ops still prints the same but i do know my glock is alot more accurate of a gun and is 3 years old and my tacops is 5 months old and looks like its been through some shit and i only have 300 rounds through it compared to my glock having over 1500 and still looks new
Racking gets better with time. Got to get in and clean and lube it. Especially clean the magazines. Some of them come in from factory very gritty and dirty. Have the compensated macro and performs well.
Have you tried the Glock 45 9mm? I have one with the holosun SCS MOS optic on it. once I upgraded the trigger it's a nice shooting pistol. I just picked up one of these X Macros yesterday.
Yeah I bought the xmacro comp version because that was available at the time of purchase. I like it, but it was 150 more which is crazy. If you can get the regular xmacro do it. Longer barrel, same length slide and two mags speed loader. For $649.00 vs $800.00 Tacops you get a mag flare and 2 more mags for 750.00 it’s a little better buy.
IMO, Tacops is definitely the best value of the 3 due to the 2 extra mags ($54/ea. MSRP), flared mag well, and extended slide release - I also prefer the 3.7" barrel over the comp version.
I have the normal XMacro, not comp or not Tacops. Came with a manual safety which I opted for. It is amazing! Wish the comp came with a safety but it didn’t unfortunately. I could always change mine to be that way though but I love how the longer barrel in my normal one shoots!
I added a manual safety (takes 5 minues) , upgraded to the Wilson grip module while at it. If you want to beat guys with full size guns at classes or competition, this is the set up.
I have done the same but not the tac ops because of the extra heat the comp and ported barrel will give off and have not got completely comfortable with the Sig yet
I knew you were a big dude when i saw how you were holding this pistol in your fingers. The TACOPS is relatively large in my hand and you're handling it like I do a standard p365😂
Nice review. You should post a range review. One question. Have you tried shooting the gun with a round in the chamber and a full mag (17+1)? With the gun cycle a completely full mag?
@@HWG-wm8ld The author was talking about how hard it was to rack the slide on a full mag, indicating a lot of slide drag from the fully compressed mag spring. That slide drag could retard slide cycling from the first round.
I have a P365xl and this is extremely difficult to do with the 12 round mags. I opted in for a magguts +2 conversion and keep one less in the mag if I’m not chambered.
I have the p365 XL and the p365 X macro non-comp like this gun absolutely love both guns but the macro was printing more than XL so I was carrying that but then I recently found the Pegasus by DeSantis slim-tuk holster for the macro it is the best holster that I have found it holds the gun so much closer to my body and don't print at all so I've been carrying my macro again lately but absolutely love both guns I have 1700 rounds through my Excel and 1950 through my macro no issues and I have shot the cheapest ammo that I could get through both of them they've been flawless
I've heard a lot of positive things from people recommending the PHLster carry system for AIWB. It allows for a very close to the body mounting system. There are several holster options that work with it : PHLster has their own, Henry Holsters, KSG armory. If you're on the fence about the Xmacro because of printing, check them out.
Had a catastrophic failure with a p320 and p365 using no factory ammo. Just replaced the grip module and the slide stop in the p320 and kept on rocking, Replaced the Grip module on the p365 and kept rocking. If that happens to a Glock you would have to pretty much replace the gun (serialized receiver)
@@johns6431your not very smart are you. Just google Glock catastrophic failures you’ll find a whole shit ton. Ammo generally causes catastrophic failures, not the gun
Tacops is fine, I’d rather have the non comp, non Tacops version. I don’t like the magwell. If for some reason I need to strip/pry out the magazine it’s more difficult to do so due to sinking deeper into the grip. The regular X Macro allows the bottom of the magazine to stick out for easy access.
I rented a p365 at a local range. I was shocked at how the recoil wasn't bad and obnoxious. My G19X has more of an obnoxious recoil than the p365. I definitely would want p365x for longer grip, macro maybe even better.
The Sig P320C Romeo was my Glock 19 killer after 7 years of EDC. The Sig P365XL Romeo was my P320 killer.. Been carrying the P365XL Romeo Zero for 3 years and don’t see changing anytime soon..
I ditched my g19 for the 365xl about 2years ago and have pretty much carried it everyday since, I shoot it so well and am very confident with it. Loved the g19 and originally was going to only use the xl In summer as I’m a smaller guy and really had to pre plan what I wore during summer with the g19 but ended up shooting it so good just can’t see going back 😎
Give us a self-defense situation where you will need to immediately rapid-fire hundreds of rounds through a pistol. It's not an IPSC gun, its a carry/home defense gun.
I can't decide between 365xl or X?.. What's the barrel length on this one above your showing? Pls tell me how the barrel length 3.1" makes the difference vs. 3.7" ?
I have both IWB and OWB for different outfits. For IWB I personally like crossbreed or similar style “hybrid” holsters. My OWB is made locally by AAA Concealment. That’s just my personal preference though, it’s important to try out different kinds to find what works for your needs and build.
Just had a conversation with sig CS earlier today about my brand new p365 that came with 2 Mags that wont reliably function. They said i need to break in the gun/mags with 200-300 rounds to expect any reliability. What are your thoughts on that? I've never had a pistol mag issue outside of 1911s.
I haven’t had that experience with my mags personally, but that seems excessive. If all of your mags are having issues then one would think that the pistol itself is the problem, not the mags
You can also completely load and unload those new mags 5 times. This has solved that each time I’ve seen. From 365 mags to shield, and even the new beretta 80x cheetah. You should be right back in business!
@InferiorRifles it's the mags for sure. The followers are getting stuck. if I eject the mag and tap it to dislodge the follower, it shoots up and gets stuck half way out the top. I'm going to load and unload the mags a bunch of times like the other guy said here to see if that fixes it. Either way, it's wild to me that a modern handgun would have an issue like this and that the companies stance is to "break in" the magazines.
I've been carrying my 3rd gen G19 w a 17 mag forever. Thinking of switching. Heard they had some safety issues? Going off in a holster and whatnot. All that worked out?
That was the p320 not the 365. Only issue 365 had was the striker getting brittle and breaking but that was the very first batch of 365’s before the xl, macro, macro comp or tacops existed and it’s been solved.
Just add an adapter plate and you'll have the cowitness you want. Also, fully load the mags and set aside for a couple weeks before using . I've had 5 including 10, 12, and 15 rounds, (no Macro yet) and subsequent loadings became easier. The WC modules are great. My only complaint ever with P365's was grip didn't feel right but the WC's are great. I have one on a 320 RX and big improvement. Added the WC tungsten grip weights as well.
Seeing how you have to count on the pistol for defense of life feel the machanics of the 19 and that sig when tbe trigger breaks on a sig its dol and weird sounding the glock crisp and its just a better gun the springs are bigger and parts dont have to be micro size .i aint rushing to bye a 800 dollar peice .
@@InferiorRifles Thanks! I like these H3 irons even more than Ameriglow or Trijicon. I would love if you can do a quick video showing how they look infront of and through your optic.
I like my sig x macro. Carries just a tad better than my g19 but honestly, they both don't carry as well as some other options. Also I definitely don't think it's a glock killer. After doing a cheap trigger job on my g19, the g19's trigger blows my macros trigger away. The comp on the sig just made it recoil like a stock g19, and after i installed a comp on my g19, there is no comparison. The compensated g19 shoots way better than my macro. Especially with the trigger job.
1 guy made a video about this on youtube and suddenly everyone is talking about P365s rusting. I have 2 of them for years, no rust. It's embarrassing how many people use youTube as their source on firearms.
I was concerned about the 17 round slide and how hard it was to rack slide. I was going to carry 17 plus one but decided to carry 16 plus one, thinking it would be more reliable. I figured if you fired first round the next round would be easier to load since there is 16 rounds instead of the harder to rack 17 round total.
Everybody is different. I find red dots useless and donated mine to Ukraine. I put Speed Sights on all guns. I am exploring BarSto ported barrels. Cheers
Yea it SHOULD be cheap to change the grip frames. That was spose to be the point. But these companies making them are charging $400 for a grip frame… you can buy full guns for 4-$500. So I can’t quite understand why someone would buy a x macro for $800 then spend $400 on a grip frame. Now add a $350 red dot. A trigger, some extra mags, jeez by the time you do this your at a $2000 carry pistol lol… I get the modularity of it and it’s great for certain things when your using basic products. But to buy a $400 grip frame is absurd to me. To each is own tho I guess! Nice video.
The $400 grip modules you’re referring to are full CNC aluminum. It’s a complicated part to machine and then has to be anodized or coated in some way. All of which meaning it will be expensive when compared to Sig’s $65 OEM polymer grip modules. People typically add the upgrades you mentioned because they add something that the gun previously lacked, even if that “something” is just a better feel or aesthetics. If you don’t see the value in an upgrade, don’t install it. None of this takes away from the Macro itself being a fantastic carry gun.
I really don’t understand why people bash sig so much when In all reality the amount of times they shoot a year they could have a Taurus g3 an it would be perfectly fine
Dude, I’m with you. I never even saw this gun coming but was stoked when it dropped. Especially with the Tac Ops. Been carrying for about 6 months. I’ve even carried it on jobs. I was considering an aftermarket slide to get around the comp of the original macro. 17 rounds! Absolutely fantastic. Got about 800 rounds through mine with one failure, which was probably the tension in the new mags. That’s what I was on the range sorting out in the first place. Sig knocked this one out of the park. Thank you for your thoughts on this one. I always respect your thoughts and opinions. 🙏🏻
Do you have an optic on yours? I just saw a review that said the rear sights will NOT come off. Which takes out a good amount of options for optics. Thanks
@@QUEST_4_FREEDOM rear sight should def come off by traditional drifting. The rear sight channel is cut separate from the optic channel. To add a different optic outside of their spec is going to require custom milling. I’m running the Holosun EPS currently.
Thank you for your response. I'm the first to admit, I'm new to optics and Optic cuts and all of that. I read that in a review. It may be on Palmetto State Armory website I believe. I was about to get a Holosun HE407K-GR X2 6 Red Dot Reflex Sight 1x and then I saw that review and now I don't know what to do
It is weird too because I have youtubed and searched for Tacops p365 macro with Optics and I don't know if it's my head or what but it seemed like those had less optics on them than the other options for p365's
@@TheArmorersFixhis exact words are "Optic cut does NOT remove rear sight. Hope this helps". Am I misinterpreting what he's saying?
I’ve slowly converted my XL into a Tacops, and have fallen in love with the gun I used to just like.
Same here. I don’t use my 19x after that
Armory Craft Ultimate Trigger Spring Kit. It's only $20 and cleans the creep and mush out of the trigger, makes it feel slightly lighter and has 100% reliability from my testing and their claims. It does take a little work to install because you have to disassemble a good bit of your FCU and striker. Wasn't too difficult with limited tools.
Awesome review! I am 6'9" and also currently carry a Glock 19 Gen 5 MOS. I really want to get The X-Macro TACOPS. I'm pleased to hear the positive review coming from a big guy like myself!
P365XL owner here. It gets better with use.
me too, i enjoy it with extended clip for the extra pinky space. my everyday carry.
First firearm I bought was the sig 1911 TTT. NEVER had an issue or malfunction. This was an extremely informative video. I’ll be purchasing the p-365 next.
Sig is solidly reliable.
Nice review. Thanks for the sight recommendation. I currently have the Sig suppressor height sights with the Holosun 507k and it takes up too much of the window. I also have the Mcarbo trigger installed, it takes up alot of pretravel check them out. It was not too much of a pain to install.
QVO tactical sells screws that direct mount the EPS to the slide without a plate. Just an FYI.
Nice details! I'm really stoked about the smallest P365, since I pocket carry and find the small grip quite comfortable. With a 17rd mag for the reload, and I'm a happy CCW!
For those interested, adding a thumb safety is dead easy; it will pop right into the circular cutout at the back of the trigger module. The hardest part will be cutting a safety slot in the grip module, if a notched grip is not available to fit the owner's preference
I saw the P365 X-Macro and was impressed with the size and capacity, but not a fan of the "comp". I love my X-Compact P320, but when I saw a video of a build I thought 🤔, "If only they made this no "comp" version direct from the factory". Then I realized my prayers were answered before they were even sent. No "comp" a longer barrel, extended controls, and an easier conceal than my P320 with the WC Carry 2 grip.
This will be my EDC for the foreseeable future. The EPS Carry with the direct mount screws feels like a cheat code. Now to follow up on the recommended Armory Craft P365 Ultimate Master Spring Tuning Kit.
The P320 XCompact was already a G19 killer, when the P365 XMacro out, it just became embarrassing, it's hands down probably the best 9mm hi-cap carry pistol on the market today.
I’m with u on p365 but you hurt your credibility by saying the super thick p320 is a glock 19 killer
@@MercyBlack137 Dude don’t beat the dead horse again. Look up how many silent recalls and upgrades Glock had throughout the 90s including slamfire incidents. Don’t have a double standard.
I carry one in the chamber. definitely hard to rack the slide with a full mag. Hoping it would just break in. Love the tacops with a longer barrel vs the macro comp.
It will break in mine did the same thing but it gets easier
Hey Man, great review as usual. Any word on Wilson Combat Grip Module or potential 365 X-Macro Tacops evolution like Equinox, Classic, Scorpion, AXG Grip or Legion? Thank you........
the 365 defies physics shoots so much ‘bigger’ than it is. trigger is meh, but that’s no reason to not carry a pistol. good stuff
I have a stock p365 and just ordered this. Gonna swap the slide and fcu into that smaller frame for when I wanna carry that. Will also get EPS carry MRS green as well so I’ll had an optic to use
I carry the OG 365 with a 17 round magazine...with 1 in the chamber...I love it
Sig must be a real treat to someone with all the heated comments I have seen on there gun reviews..I believe it’s time to buy one!
Where are you putting your support hand when your fingers are wrapping all the way around that narrow grip; is there any room on the grip for your support hand?
Was looking at one of these and a g45 about 3 months when deciding on a new ccw. It was a hard decision but i went with the g45 due to it being about $80 less and having a better finish for southern weather.
Just bought a 45 MOS it’s perfect
I have a 19X and would consider myself more of a Sig guy. The 19X is by far the best gun I have and I shoot it better than any of my Sigs. I like the 19X so much I think I need a G45.
cant blame u alot of guys who been shooting the tacops been slowly switching back to the 19 or g45 considering finish and the gun malfunctioning after so many rounds the control unit wears out after so many rounds run through them big issue with the p320 also and the finish on mine is just sub par even the the gun is thinner i cant really tell the difference in carrying my 19 or the tac ops still prints the same but i do know my glock is alot more accurate of a gun and is 3 years old and my tacops is 5 months old and looks like its been through some shit and i only have 300 rounds through it compared to my glock having over 1500 and still looks new
@@davidwilson5581😂
Awesome video. Thank you!
Also Wilson combat has made a grip module that fits the 17rnd mags. comes in 4 colors.
Sig mags marked made in USA are made by Checkmate. I just got mine and they were no longer available with suppressor height sights.
Racking gets better with time. Got to get in and clean and lube it. Especially clean the magazines. Some of them come in from factory very gritty and dirty. Have the compensated macro and performs well.
Have you tried the Glock 45 9mm? I have one with the holosun SCS MOS optic on it. once I upgraded the trigger it's a nice shooting pistol. I just picked up one of these X Macros yesterday.
Yeah I bought the xmacro comp version because that was available at the time of purchase. I like it, but it was 150 more which is crazy. If you can get the regular xmacro do it. Longer barrel, same length slide and two mags speed loader. For $649.00 vs $800.00
Tacops you get a mag flare and 2 more mags for 750.00 it’s a little better buy.
IMO, Tacops is definitely the best value of the 3 due to the 2 extra mags ($54/ea. MSRP), flared mag well, and extended slide release - I also prefer the 3.7" barrel over the comp version.
I have the normal XMacro, not comp or not Tacops. Came with a manual safety which I opted for. It is amazing! Wish the comp came with a safety but it didn’t unfortunately. I could always change mine to be that way though but I love how the longer barrel in my normal one shoots!
Regular X Macro is the way.
@@vitogrimes6006 it is amazing I’ll tell you that! I love it
I added a manual safety (takes 5 minues) , upgraded to the Wilson grip module while at it. If you want to beat guys with full size guns at classes or competition, this is the set up.
Your finger is the safety
@@tax905972 duh. I still want more than one safety
One word outstanding ps been considering one but put off about the mags rusting
I love the platform and just ordered the P365 AXG legion because I love heavier guns.
I have done the same but not the tac ops because of the extra heat the comp and ported barrel will give off and have not got completely comfortable with the Sig yet
The tacops is the truth. It is my edc. Awesome shooting gun. It shoots like it’s a full size gun. I love it.
Why did you put an optics plate? I don’t use one for mine. It mounts directly to the slide without a plate
Can we talk about the fly on the wall so to speak? He was sure checking out that gun in the end of the video. :)
I knew you were a big dude when i saw how you were holding this pistol in your fingers. The TACOPS is relatively large in my hand and you're handling it like I do a standard p365😂
Nice review. You should post a range review. One question. Have you tried shooting the gun with a round in the chamber and a full mag (17+1)? With the gun cycle a completely full mag?
Why would it not
@@HWG-wm8ld The author was talking about how hard it was to rack the slide on a full mag, indicating a lot of slide drag from the fully compressed mag spring. That slide drag could retard slide cycling from the first round.
I have a P365xl and this is extremely difficult to do with the 12 round mags. I opted in for a magguts +2 conversion and keep one less in the mag if I’m not chambered.
I have the p365 XL and the p365 X macro non-comp like this gun absolutely love both guns but the macro was printing more than XL so I was carrying that but then I recently found the Pegasus by DeSantis slim-tuk holster for the macro it is the best holster that I have found it holds the gun so much closer to my body and don't print at all so I've been carrying my macro again lately but absolutely love both guns I have 1700 rounds through my Excel and 1950 through my macro no issues and I have shot the cheapest ammo that I could get through both of them they've been flawless
I've heard a lot of positive things from people recommending the PHLster carry system for AIWB. It allows for a very close to the body mounting system. There are several holster options that work with it : PHLster has their own, Henry Holsters, KSG armory. If you're on the fence about the Xmacro because of printing, check them out.
Had a catastrophic failure with a p320 and p365 using no factory ammo. Just replaced the grip module and the slide stop in the p320 and kept on rocking, Replaced the Grip module on the p365 and kept rocking. If that happens to a Glock you would have to pretty much replace the gun (serialized receiver)
Glocks don’t have catastrophic failures 😂
@@johns6431any gun can have a catastrophic failure. Especially when shooting reloads, like mentioned in the original comment.
@@johns6431your not very smart are you. Just google Glock catastrophic failures you’ll find a whole shit ton. Ammo generally causes catastrophic failures, not the gun
That sig looks like a toy gun with your huge hands!
Great video sir!
Very cool. Never looked at a cross breed they look comfortable
Check out a ProTECH micro. I like the full kydex mounted to leather.
Tacops is fine, I’d rather have the non comp, non Tacops version. I don’t like the magwell. If for some reason I need to strip/pry out the magazine it’s more difficult to do so due to sinking deeper into the grip. The regular X Macro allows the bottom of the magazine to stick out for easy access.
im brand new to pistols and the world of hand guns. whats your opinion on this 365 tac ops for a first time owner? no shooting experience.
Question is will the WC grips accept the stock mag flare?
I rented a p365 at a local range. I was shocked at how the recoil wasn't bad and obnoxious. My G19X has more of an obnoxious recoil than the p365. I definitely would want p365x for longer grip, macro maybe even better.
Who is more accurate and smooth trigger?
I purchased one of these with the Sig Optic for $669 shipped. I think I someone made a mistake so I snatched it QUICKLY
Perfect choice!!!
Very good vid. XMACRO IS BOSS
I just bought this as my first gun. Getting my laser sight installed today
Also Icarus Precision made some great grips for P365
SIG has the promotional till the end of the year that you get 3 extra 17 round magazines with proof of purchase
The Sig P320C Romeo was my Glock 19 killer after 7 years of EDC. The Sig P365XL Romeo was my P320 killer.. Been carrying the P365XL Romeo Zero for 3 years and don’t see changing anytime soon..
You don’t shoot much
@@HWG-wm8ld - about 1,000 rnds per year. Had 11k on my G19, 7k on the P320, 2k on the 365. Compete in IDPA & Steel.. how about you?
@@ynotjfSave up mehn. It'll be ok.😅
What is the sku of the sights you ordered?
How many magazines does it come with the case inside?
I ditched my g19 for the 365xl about 2years ago and have pretty much carried it everyday since, I shoot it so well and am very confident with it. Loved the g19 and originally was going to only use the xl In summer as I’m a smaller guy and really had to pre plan what I wore during summer with the g19 but ended up shooting it so good just can’t see going back 😎
Great video . Change the trigger will be better also
I have the same pistol and it is replacing my 43X.
One thing I don’t like about the 365 is the trigger gets extremely hot after couple hundred rounds at range.
@@tommyyuckguts5276how many thousands of rounds have fired with your Sig 365x?
Give us a self-defense situation where you will need to immediately rapid-fire hundreds of rounds through a pistol. It's not an IPSC gun, its a carry/home defense gun.
I can't decide between 365xl or X?.. What's the barrel length on this one above your showing? Pls tell me how the barrel length 3.1" makes the difference vs. 3.7" ?
I went to buy the XL and my hand was still too big. With the 17 round mag this fit better.
your 6'8 Gyatt damn!
What holster do you use for this gun? OWB or IWB? Any recommendations?
I have both IWB and OWB for different outfits. For IWB I personally like crossbreed or similar style “hybrid” holsters. My OWB is made locally by AAA Concealment. That’s just my personal preference though, it’s important to try out different kinds to find what works for your needs and build.
Just had a conversation with sig CS earlier today about my brand new p365 that came with 2 Mags that wont reliably function. They said i need to break in the gun/mags with 200-300 rounds to expect any reliability. What are your thoughts on that? I've never had a pistol mag issue outside of 1911s.
I haven’t had that experience with my mags personally, but that seems excessive. If all of your mags are having issues then one would think that the pistol itself is the problem, not the mags
Disassemble the magazine, diss the spring a couple times, then do some dry cycling. If it happens again, tell the CS people, it's f@#&ed.
@@seijiroukikuoka5975agreed! That’s the very issue I’ve seen from some of these tiny mags with excellent round counts smashed into them.
You can also completely load and unload those new mags 5 times. This has solved that each time I’ve seen. From 365 mags to shield, and even the new beretta 80x cheetah. You should be right back in business!
@InferiorRifles it's the mags for sure. The followers are getting stuck. if I eject the mag and tap it to dislodge the follower, it shoots up and gets stuck half way out the top. I'm going to load and unload the mags a bunch of times like the other guy said here to see if that fixes it. Either way, it's wild to me that a modern handgun would have an issue like this and that the companies stance is to "break in" the magazines.
Can you drop a link to the 1/3 sights you got? I have the same set up but I’m hesitant to buy any
www.nightfision.com/product/night-fision-optics-ready-stealth-series-for-sig-sauer
.289-.287 Height for lower 1/3 cowitness
Is it actually cut for the EPS Carry though? It looks like there is a plate in there.
The plate comes with the EPS carry. You can direct mount it without the plate if you get shorter screws
Wish i could make my self like the rest on the sig but for me its a no go.
Mine was stiff like that, too. Finally broken in after 800 rounds or so.
I've been carrying my 3rd gen G19 w a 17 mag forever. Thinking of switching. Heard they had some safety issues? Going off in a holster and whatnot. All that worked out?
That was the p320 not the 365. Only issue 365 had was the striker getting brittle and breaking but that was the very first batch of 365’s before the xl, macro, macro comp or tacops existed and it’s been solved.
Thanks, I went to take a look at the Macro and boy does it feel so much better then the 19. As far as carry goes. @@kevinborish
What is tacops?
Just add an adapter plate and you'll have the cowitness you want. Also, fully load the mags and set aside for a couple weeks before using . I've had 5 including 10, 12, and 15 rounds, (no Macro yet) and subsequent loadings became easier. The WC modules are great. My only complaint ever with P365's was grip didn't feel right but the WC's are great. I have one on a 320 RX and big improvement. Added the WC tungsten grip weights as well.
icarus grip?
Seeing how you have to count on the pistol for defense of life feel the machanics of the 19 and that sig when tbe trigger breaks on a sig its dol and weird sounding the glock crisp and its just a better gun the springs are bigger and parts dont have to be micro size .i aint rushing to bye a 800 dollar peice .
Sigs are single action striker fired. Is this why the 320’s are going off?
They AREN’T. A few did-in the beginning-but they haven’t since then, which was many years ago.
It says it's a 1.4in width...is that just because of the flared magwell?
Yes. 1.1 inches without the magwell
Wish the 365 was ambi. Would be awesome
I can confirm you only get 2 17rnd mags in the Xmacro comp version
You get 4 mags in the Tacops
Which size sights did you order for lower 1/3? 289-287 or 240-238?
289-287
@@InferiorRifles Thanks! I like these H3 irons even more than Ameriglow or Trijicon. I would love if you can do a quick video showing how they look infront of and through your optic.
great vid Fam,,,,, just subs.
Does anyone else have issues with front sights moving after a few mags???
I personally have not.
What do you mark your red dot screws with?
Sharpie paint pen
So at $55 a piece retail, getting 4 mags is a huge plus!!
yes. and now thru December, Sig will give 3 free mags via rebate on any new P365 purchase.
Where can I buy this gun with this eps carry included and how much does it cost?
Sig does not currently sell the X Macro with the EPS carry included.
I have been researching this gun for awhile now. I am 6’4. If this gun fits him well at 6’8, I’ll be ok with it. Thank you!
I don’t get what your height got anything to do with any gun fit?
@@wildwolf8983 tall people usually have larger hands. Not a difficult concept lmao
I like my sig x macro. Carries just a tad better than my g19 but honestly, they both don't carry as well as some other options. Also I definitely don't think it's a glock killer. After doing a cheap trigger job on my g19, the g19's trigger blows my macros trigger away. The comp on the sig just made it recoil like a stock g19, and after i installed a comp on my g19, there is no comparison. The compensated g19 shoots way better than my macro. Especially with the trigger job.
Any issues with rust that's been talked about?
None with mine
1 guy made a video about this on youtube and suddenly everyone is talking about P365s rusting. I have 2 of them for years, no rust. It's embarrassing how many people use youTube as their source on firearms.
Of course there are no issues. I doubt there ever was.
Been seeing several reports of rust due to poor finish. Anyone having the same issues?
My friends has rust but he also never cleans it. So I think that’s the issue
I just put one on layaway 4 when I turn 21
Is the slide the same length as the xl??
Yes
Nice gun. The ND's being reoort by the P320 give me pause.
The 365’s are a totally different animal! I haven’t heard of any ND’s with the 365 series of pistol’s!
@@tacratt6091that's good to know. I have heard the FCG was similar with a couple difference hopefully that is the case
The bore axis is too high, which makes the muzzle flip more dramatically.
The P365 series has the same bore axis as a Glock.
I don't think it's a glock killer because it has many issues. If yours don't have issues then you are one of the lucky ones.
I was concerned about the 17 round slide and how hard it was to rack slide. I was going to carry 17 plus one but decided to carry 16 plus one, thinking it would be more reliable. I figured if you fired first round the next round would be easier to load since there is 16 rounds instead of the harder to rack 17 round total.
no trigger or manual safety?
P365s are available with or without a manual safety
Slimmer grips feel great to me, but I actually shoot the fatter grips better.
The mags just need to be broken in. After a few range trips it's much easier to load the mags and chamber a round
Everybody is different. I find red dots useless and donated mine to Ukraine. I put Speed Sights on all guns.
I am exploring BarSto ported barrels.
Cheers
Yea it SHOULD be cheap to change the grip frames. That was spose to be the point. But these companies making them are charging $400 for a grip frame… you can buy full guns for 4-$500. So I can’t quite understand why someone would buy a x macro for $800 then spend $400 on a grip frame. Now add a $350 red dot. A trigger, some extra mags, jeez by the time you do this your at a $2000 carry pistol lol… I get the modularity of it and it’s great for certain things when your using basic products. But to buy a $400 grip frame is absurd to me. To each is own tho I guess! Nice video.
The $400 grip modules you’re referring to are full CNC aluminum. It’s a complicated part to machine and then has to be anodized or coated in some way. All of which meaning it will be expensive when compared to Sig’s $65 OEM polymer grip modules.
People typically add the upgrades you mentioned because they add something that the gun previously lacked, even if that “something” is just a better feel or aesthetics. If you don’t see the value in an upgrade, don’t install it. None of this takes away from the Macro itself being a fantastic carry gun.
I have replace my G32 with it and there is no going back!!!
Not sure why anyone would carry without a round in the chamber.
I’m not condoning or recommending it. But people do it, so I felt it was worth mentioning.
Better than not carrying at all
Tim at MAC gave up his G19 for a P365
10 years ago. No one had a red dot. No one thought much of them. Now it seems EVERYONE has a red dot.
I still choose my 19 ✌️
I really don’t understand why people bash sig so much when In all reality the amount of times they shoot a year they could have a Taurus g3 an it would be perfectly fine
The best sig is the p226 and p229.