*"I LOVE THIS VIDEO"* I've had a 30w Fiber Laser Machine for nearly two (2) years now and haven't engraved one thing yet other than some of those black aluminum cards which seems to be the only thing I can do as a noob because I don't understand settings and the machine coming from China provides no support. This is some great info and I will be trying these settings tomorrow to see if I can find the problem to my delima of not being able to successfully use my machine properly and engrave like it should.
YOU did a great job brother. you solved all of my laser servicing problem. i am a fiber laser cutting engineer now recently enter into laser marking too.
yeah i run a 50 watt fibre laser and have never changed those spot settings since the machine is installed, instead setting up the desired finish using speed, power and freq and controlling the mark with spot size (typically 0.04) and various forms of hatching and cross hatching say if the material coating is particulary troublesome, so 50hz delivers the most power and then upping to 80 or 90hz for a nice polish (on steel) so just as an example , 0.04 spacing, cross hatch, 3000 speed, 100% power and 50hz for taking a coating off then 0.04, single hatch, 3000, 60 power, 100hz to polish
Hi Jeff, I just bought a nice used 30 watt fiber laser. It worked great at the seller's house, because of course he KNEW what all of the settings do. Well, I loaded EZCad2 onto my laptop, and got as far as the laser drawing the DXF file with red light, but I am NOT burning or etching. Can you do a video on how a complete green behind the ears NEWBIE laser owner can get set up and burning? I can draw DXF files using my plasma table software, so I do not need to know about drawing with EZCad2 quite yet. But I want to know what I am doing WRONG, that I cannot burn an image into a black anodized blank business card. I have subscribed, so I will be watching with great interest!
You have to dial in your focal point. I was having the same issues getting stuff to burn. The process I used as a newbie was to move the laser up or down by 1mm at a time and trying to mark. Once it starts to burn, keep going and pay attention to the sound of it marking. Once you hit the loudest point, that's it.
Well done. We have many greens, reds and oranges at 25% power in the .0005 and .001 line space range. At 20% power, we did a second pass at 0.001 line spacing and got a nice black luster at 80kHz, and a deep maroon at 60kHz. If you want to get some rainbows, we did a double pass at 20% power, 800MM/s to get brilliant colors at .0005,.001 and .002 across all frequencies.
THANK YOU - this vid is still very helpful and relevant! I'm looking for more details on how speed + power + frequency impact the depth of engraving, specifically to optimize cutting metals (no hatch, just a 0.3/0.1 wobble config'd for the pen). I can see I need to dial this in for each lens (50W JPT; f100 and f290 lenses). Do you have something like this done --OR have info on how I calculate it? 🍺🦝👍
Hello JefferyJ, excellent explanation. Would it be possible to see the parameters published for certain "colors" such as RED, YELLOW, BLUE, on stainless steel?
Hi Jeffery, long time since you posted. When you do this graph, when you change parameters in layer parameter settings, do you have to do each layer independently? I have 70 layers and have gone through and changed pramaters in every single layer. Now I have to go back to change mark speed to 500 on every layer. Is there a quicker way of doing that?
Iam working with pigeon rings i have gold color its aluminum coated with gold color all what I can create just white color text . i need black text on aluminum rings , do you have any solution i hope you can help me Note : i hat 20 watt fiber mark machine with rotary Many thanks
Love your tutorials Jeffery, where do you get your sheets of titanium and stainless from? Need to get some similar stock in to make some cool things? 👍😎
hi complete newb here so I hope this isn't a stupid question but can anyone tell me If you can change the max Khz in the configurations, I keep trying to make tests with parameters that use 40 or 50 kHz but ezcad keeps telling me the max is 20, so is that it I can't use frequencies above 20?
I hadn’t payed attention to that spot diameter visualisation dialog.. good pointer. Another big thank you from me: it’s really great that you are publishing videos of your experimentation since there isn’t much else out there. Is there a shortcut you use when making those test patterns or do you go through the boxes one by one and adjust pen settings?
I've been trying to find a shortcut by opening every file in the ezcad folder that looked like it might store pen settings, but I haven't found it yet. So yes, one by one....very tedious. If you want the file to play with, let me know and I'll send it your way.
Param/markparam.lib has the saved param library- each [section] is a single pen config, but unfortunately while that would allow programmatic generation or just search and replace, you would still need to manually apply a different setting to each pen which is still 75% as tedious.
I have made many setting with the frequency and hatch but i am not getting the proper result - if i print a text called TEXT , the last letter T is not as the same as TEX - why is that , how can i fix that
I really appreciate the video and has helped me understand more about the settings and parameters. Is there a way that I might be able to produce a chart like this so that I can maybe download it and/ or see the different settings for my fiber laser. I want to be able to see the outcome on the material that I use so that I may be able to adjust the settings according to my fiber laser.
Hello, on the Power vs speed and power vs freq the hatching is not setup. I cant seem to be able to figure out to hatch more then one item on the page. When editing the hatching parameters on right IE Speed, power and Freq then click APPLY and got on to the next and change it. After doing rows, I go back and click to check it and the last info I input in 1 box shows the same info I put in the last. If possible can you explain how to set up parameters and do hatching on the box to show different values. Thanks again for doing these they helped a lot.
I made a video a while ago on hatching; it might be worthwhile to check out to make sure you're doing the same things I am to set up pens and apply hatch settings. Here's a link: ruclips.net/video/kmxDePbHHOk/видео.html
Hi ! Very nice videos. Do you know what happens if i set a frequency out of range of the laser source inside my machine ? For example i set 45 KHz and the source has a range between 50 and 80 KHz ? Thank you Olivier
When I tried doing stainless steel at first on my 30W fiber non MOPA it was like a brownish goldish color and I didn't like it but now I go out of focus by 3-5mm and it no longer etches the steel but burns a very dark image on the steel. You should try to go out of focus to get that black anneal and also see what colors you can get out of focus. Great videos especially since there is so little out there in tutorials for these lasers in English.
i too have 50W raycus fiber non MOPA, does frequency affecting the result too? because the company said no need to change the frequency because its not MOPA. i really need black smooth marking but never achive it, always looks goldish color. Please help me..
@@rumblemumbles Do what I told you above, you need to find the sweet spot where it starts to etch the metal then raise the head about 3mm to get the dark image. Also you want the lowest Frequency your laser goes to make dark images. I have a 30W so my laser can do 30 KHz to 70KHz. The higher the frequency the lighter in color for non MOPA.
@@Angryhelder yeah i already try for 1 week with every parameter and power setting with my 50w and 50KHz and raise the focus, but the result is always not truly jetblack, it turns out greyish black. but thanks for the info. sorry for my bad english.
Hello! Excellent videos , Thank You very much!! Please can you maybe make a video of Hatch(0.01-0.05) vs SPEED(100-500mm/s) on Gray/SIlver Anodized aluminium at 50% power 40khz+ frequency?? I noticed a very big influence of HATCH on darkness of the mark. Tighter hatch giving brighter mark. I do not have access to Gray Anodized aluminium anymore, I used test pieces I had.... It would be a great help for those trying to get a dark mark on Gray anodized aluminium...
Hi, Jeffery, thank you for your very nice explaination and details for all that. I am new to fiber laser, could you please tell me how to setup the POWER/FREQ/HATCH testing file in the EzCad2(or simply you can upload the testing .ezd file) for us to get the testing done like what you did in the video?! Much appreciation for your help!
@jeffreyJ Thanks a bunch for these! This seriously helps me figure out some questions I had about my laser engraver! I'm only a few weeks into the engraving but this shot me forward several months!
Any advice in engraving Silver? I have been trying everything I can and Silver is not engraved at all. I have tried the focus, lowering and making the laser lens go up, nothing works.
hi i have a problem with params i touched some of the ports and settings and the fiber laser just wont work and any other ports i see on youtube dont work how can i fix?
I have a 50w with a 300mm lens. will i need to make any adjustments to the settings once i download the power vs frequency test grid? learning my machine slowly
Hi Jeffery! Was it a 20W fiber laser machine use in the test on 3:50? Because I had bought a 20W fiber laser machine as well and downloaded your shared file to do the same test just like 3:50. I was using stainless steel pieces as well but the result was different from yours. It did not show any colour. Please help.
Hello! Jeffrey . I have a problem with my laser machine I hope that you can help me figure out. it shown up side down from the real object that I hatched it reversed from the laser. it likes a selfie from Iphone.
Hi, Newb here. Where do you get the image for running the test engravings that you did? I have my OMTECH 20W fiber laser being delivered today and could use all the help I can get. Thanks
hi , i just bought a 20w laser machine and im struggling to find the right parameter settings for marking/engraving gold products. can someone help me?
How far is the field? I'm having the same issue with copper, as my focal length is F420 I figured the laser just doesn't have the blast power with that FL, I bought a F160 lens... luckily I'll be able to obliterate copper... I assume Copper has the same issue.
@@RiderRickMaker mine is a f=163mm lens. I have tried marking using settings for brass and got quite a nice white finish on the marking. Maybe because brass density is almost the same with 24karat gold. parameter settings i used: passes/loops = 4 speed = 1500 power = 90 frequency = 60
@@yusamirulhaziq5920 wow! Thanks! I will try to do it once my new lens arrives, yeah, and if you're using 60khz at 90% with a 20W laser and get a nice surface finish, I assume I'll be ok (I have a 50W beast!)
Great video but I got quastion: so I got 2x fibers one 50w and other is 20w but 20w got 1-1000 freq. Where do I use this and for what? The 20w almost more powerful that 50w China model and 20 w is TurcMark sos laser.
Nice video. Just a question if I may. If you dont get a satisfactory color on a mark. Is it practical or possible to re-mark without moving the material. Lets say we are working on stainless steel for example. Thank you
Yes you can mark again as long as you don't touch, bump, or move the material at all. For color, the results may be a little unpredictable when re-marking.
Hey Jeffry, I am trying to put a black mark on 11 ga. mirrored Bronze plaque. The size of the plaque is 11.5"x 7.625" almost the size of a sheet of paper. I am brand new at this. I just bought my 60 watt Fiber MOPA Laser. any help with settings or if a plaque this big can even get a black mark would be appreciated. I am using a 300x300mm lens by the way. Thank you FYI I tried to email you but it came back as undeliverable
OMG...I don't know how much I've been looking for a well-explained articles or videos on this. Thank you!
Thank you for an EASY to understand explanation on frequency!
*"I LOVE THIS VIDEO"* I've had a 30w Fiber Laser Machine for nearly two (2) years now and haven't engraved one thing yet other than some of those black aluminum cards which seems to be the only thing I can do as a noob because I don't understand settings and the machine coming from China provides no support. This is some great info and I will be trying these settings tomorrow to see if I can find the problem to my delima of not being able to successfully use my machine properly and engrave like it should.
Your actual marked on minute 3.00 really help understand very much about the topic. Thanks! I want to credit your name in my documentation
Thanks for that! Simple and straightforward. Very helpful.
YOU did a great job brother.
you solved all of my laser servicing problem.
i am a fiber laser cutting engineer now recently enter into laser marking too.
Glad I could help
Hello brother
@@jefferyj I need help about marking on plastic materials
yeah i run a 50 watt fibre laser and have never changed those spot settings since the machine is installed, instead setting up the desired finish using speed, power and freq and controlling the mark with spot size (typically 0.04) and various forms of hatching and cross hatching say if the material coating is particulary troublesome, so 50hz delivers the most power and then upping to 80 or 90hz for a nice polish (on steel) so just as an example , 0.04 spacing, cross hatch, 3000 speed, 100% power and 50hz for taking a coating off then 0.04, single hatch, 3000, 60 power, 100hz to polish
Hi Bob I have 50 w fiber laser. Can you please help me?
i have a 50w with 300mm lens. learing my setup slowly. thank you!
You don’t know how big of a help this was
Hello is there a chance you can share the file you used for this ?
Fantastic video mate! I was going to ask you about frequency and you’ve answered it thank you.
Glad to help!
WOW someone with common sense lol, thank you so much for making this easy.
Can you please share those projects files that you used to set up the grid? Thanks for this.
This was so helpful and well thought out. Thanks.
Really useful video, thanks very much.
Thank you for it is very helpful for me
Hi Jeff, I just bought a nice used 30 watt fiber laser. It worked great at the seller's house, because of course he KNEW what all of the settings do. Well, I loaded EZCad2 onto my laptop, and got as far as the laser drawing the DXF file with red light, but I am NOT burning or etching. Can you do a video on how a complete green behind the ears NEWBIE laser owner can get set up and burning? I can draw DXF files using my plasma table software, so I do not need to know about drawing with EZCad2 quite yet. But I want to know what I am doing WRONG, that I cannot burn an image into a black anodized blank business card. I have subscribed, so I will be watching with great interest!
You have to dial in your focal point. I was having the same issues getting stuff to burn. The process I used as a newbie was to move the laser up or down by 1mm at a time and trying to mark. Once it starts to burn, keep going and pay attention to the sound of it marking. Once you hit the loudest point, that's it.
Well done. We have many greens, reds and oranges at 25% power in the .0005 and .001 line space range.
At 20% power, we did a second pass at 0.001 line spacing and got a nice black luster at 80kHz, and a deep maroon at 60kHz.
If you want to get some rainbows, we did a double pass at 20% power, 800MM/s to get brilliant colors at .0005,.001 and .002 across all frequencies.
So brilliant and helpful! Thank you!
very useful video
thank you for your time
Would it be possible to send your ezcad file with the different grade of frequency ? It would help me a lot ! Thanks !
Can i also get the file?
What is best settings for gold metal cutting (30gauge)...?
{30W machine}
Hi i have a little problem which is whin i print a circle it shape more like an Elliptical shape so what seems to be the problem here??
THANK YOU - this vid is still very helpful and relevant! I'm looking for more details on how speed + power + frequency impact the depth of engraving, specifically to optimize cutting metals (no hatch, just a 0.3/0.1 wobble config'd for the pen). I can see I need to dial this in for each lens (50W JPT; f100 and f290 lenses). Do you have something like this done --OR have info on how I calculate it? 🍺🦝👍
very very very very very helpful
Are there any books to help working with materials like silver, gold, plastic for example. If not it's time to write some books for ezcad3!
Thank you so much! Your videos have been very helpful.
Dude, was looking for that, thanks for sharing :)
Thank YOU!
Hello JefferyJ, excellent explanation.
Would it be possible to see the parameters published for certain "colors" such as RED, YELLOW, BLUE, on stainless steel?
please make tutorial laser cleaning using fiber laser setting
Bro, you nailed it. Just another Thank you :)
Thanks man. This help A LOT.
Thank you very much for your efforts
I have laser machine 30W , I need settings for marking on plastic materials ,I want to mark on plastic very clean and bold
Hi Jeffery, long time since you posted.
When you do this graph, when you change parameters in layer parameter settings, do you have to do each layer independently? I have 70 layers and have gone through and changed pramaters in every single layer.
Now I have to go back to change mark speed to 500 on every layer. Is there a quicker way of doing that?
Where can i download this file to try on my laser machine
Sir.. Thank you so so much. This help me a lot !!
Iam working with pigeon rings i have gold color its aluminum coated with gold color all what I can create just white color text . i need black text on aluminum rings , do you have any solution i hope you can help me
Note : i hat 20 watt fiber mark machine with rotary
Many thanks
Thank you really helpful video
Excellent video, thank you very much.
I appreciate your videos! Thank you!
Where will I get the manual for Ezcad3 for a 80w Mopa
Good video, thanks.
very helpful thank you
Thank you. Can you please also post this for brass?
Love your tutorials Jeffery, where do you get your sheets of titanium and stainless from? Need to get some similar stock in to make some cool things? 👍😎
I just picked up the titanium from ebay. The stainless I had lying around, it came from an old machine.
Great thanks 👍
Where can we get the file to try in our laser because everyones laser is different in power and laser source
you are amazing and have the most helpful videos. Is there any way i can email you with a couple questions?
hi complete newb here so I hope this isn't a stupid question but can anyone tell me If you can change the max Khz in the configurations, I keep trying to make tests with parameters that use 40 or 50 kHz but ezcad keeps telling me the max is 20, so is that it I can't use frequencies above 20?
This definitely helps a ton! Do you have a file set up for lightburn that can be downloaded?
I hadn’t payed attention to that spot diameter visualisation dialog.. good pointer.
Another big thank you from me: it’s really great that you are publishing videos of your experimentation since there isn’t much else out there.
Is there a shortcut you use when making those test patterns or do you go through the boxes one by one and adjust pen settings?
I've been trying to find a shortcut by opening every file in the ezcad folder that looked like it might store pen settings, but I haven't found it yet. So yes, one by one....very tedious. If you want the file to play with, let me know and I'll send it your way.
Param/markparam.lib has the saved param library- each [section] is a single pen config, but unfortunately while that would allow programmatic generation or just search and replace, you would still need to manually apply a different setting to each pen which is still 75% as tedious.
Excellent video! Thank You for the break down.
Would these settings also produce the same results on brass or nickel silver?
I have made many setting with the frequency and hatch but i am not getting the proper result - if i print a text called TEXT , the last letter T is not as the same as TEX - why is that , how can i fix that
very useful stuff, currently working with the lw200 by red technology and would love a m moment of your time for some questions if you dont mind
Super helpful!! Where can I find a file like this to download?
hey i have a fibre laser 100w and y try all programs and instaling desintaling all tinghts and is not worck can you help me pls ?
Hi Jeffery, I couldn’t make deeper marks so could you make a video or will you answer me how can I get deeper marks on stanless steel without burning
I really appreciate the video and has helped me understand more about the settings and parameters. Is there a way that I might be able to produce a chart like this so that I can maybe download it and/ or see the different settings for my fiber laser. I want to be able to see the outcome on the material that I use so that I may be able to adjust the settings according to my fiber laser.
Hello, on the Power vs speed and power vs freq the hatching is not setup. I cant seem to be able to figure out to hatch more then one item on the page. When editing the hatching parameters on right IE Speed, power and Freq then click APPLY and got on to the next and change it. After doing rows, I go back and click to check it and the last info I input in 1 box shows the same info I put in the last. If possible can you explain how to set up parameters and do hatching on the box to show different values. Thanks again for doing these they helped a lot.
I made a video a while ago on hatching; it might be worthwhile to check out to make sure you're doing the same things I am to set up pens and apply hatch settings. Here's a link: ruclips.net/video/kmxDePbHHOk/видео.html
This guy is definitely the same dude from the Mustard channel.
so great, thank you so much. anywhere I can download those test settings to try on different metals on my 50w?
thank you so much
Awesome info - i've recreated a few of these templates; is there any repository online where things like this are shared?
There are a few facebook groups and you can also check out fiberlasersettings.org . Try this facebook group: facebook.com/groups/547620632495173
Hello, great video, excuse me, what power is your fiber optic machine?
Hi !
Very nice videos.
Do you know what happens if i set a frequency out of range of the laser source inside my machine ?
For example i set 45 KHz and the source has a range between 50 and 80 KHz ?
Thank you
Olivier
Hi do you also have tutorials on ceramics? I cant seem to engrave on ceramics using the fiber laser
When I tried doing stainless steel at first on my 30W fiber non MOPA it was like a brownish goldish color and I didn't like it but now I go out of focus by 3-5mm and it no longer etches the steel but burns a very dark image on the steel. You should try to go out of focus to get that black anneal and also see what colors you can get out of focus. Great videos especially since there is so little out there in tutorials for these lasers in English.
Check out some of my other videos from the past. I've done a few on colors on stainless and titanium.
i too have 50W raycus fiber non MOPA, does frequency affecting the result too? because the company said no need to change the frequency because its not MOPA. i really need black smooth marking but never achive it, always looks goldish color. Please help me..
@@rumblemumbles Do what I told you above, you need to find the sweet spot where it starts to etch the metal then raise the head about 3mm to get the dark image. Also you want the lowest Frequency your laser goes to make dark images. I have a 30W so my laser can do 30 KHz to 70KHz. The higher the frequency the lighter in color for non MOPA.
@@Angryhelder yeah i already try for 1 week with every parameter and power setting with my 50w and 50KHz and raise the focus, but the result is always not truly jetblack, it turns out greyish black. but thanks for the info. sorry for my bad english.
Tanks bro
Do you happen to know what settings I would use to get a black Mark on chrome? I have a 30% watt fiber. Thanks
Keep up the good work!!! One question, does it depends on the metal to laser out colour?
awesome thanks for that info
Hello! Excellent videos , Thank You very much!! Please can you maybe make a video of Hatch(0.01-0.05) vs SPEED(100-500mm/s) on Gray/SIlver Anodized aluminium at 50% power 40khz+ frequency?? I noticed a very big influence of HATCH on darkness of the mark. Tighter hatch giving brighter mark. I do not have access to Gray Anodized aluminium anymore, I used test pieces I had.... It would be a great help for those trying to get a dark mark on Gray anodized aluminium...
Hi, Jeffery, thank you for your very nice explaination and details for all that. I am new to fiber laser, could you please tell me how to setup the POWER/FREQ/HATCH testing file in the EzCad2(or simply you can upload the testing .ezd file) for us to get the testing done like what you did in the video?! Much appreciation for your help!
Then is it possible to laser a camo pattern on a glock slide, with colour effects?
Спасибо, очень полезная информация!
Thanks so much for these great videos. Could you send me the power/speed chart please?
Go to this video: ruclips.net/video/gAhNCu6hHME/видео.html The files are available for download in the links in the description there.
Thanks a mil, I’ll try and download now.
@jeffreyJ Thanks a bunch for these! This seriously helps me figure out some questions I had about my laser engraver! I'm only a few weeks into the engraving but this shot me forward several months!
Any advice in engraving Silver? I have been trying everything I can and Silver is not engraved at all. I have tried the focus, lowering and making the laser lens go up, nothing works.
Im looking for help with an electrox ebox raptor fiber laser thats not marking at all.. would adjusting frequency affect etching output ?
hi i have a problem with params i touched some of the ports and settings and the fiber laser just wont work and any other ports i see on youtube dont work how can i fix?
The Best!!
I have a 50w with a 300mm lens. will i need to make any adjustments to the settings once i download the power vs frequency test grid? learning my machine slowly
Hi Jeffery! Was it a 20W fiber laser machine use in the test on 3:50? Because I had bought a 20W fiber laser machine as well and downloaded your shared file to do the same test just like 3:50. I was using stainless steel pieces as well but the result was different from yours. It did not show any colour. Please help.
What is the pulse duration here?
How we can laser on gold colour in black stamp...
Hello! Jeffrey . I have a problem with my laser machine I hope that you can help me figure out.
it shown up side down from the real object that I hatched it reversed from the laser. it likes a selfie from Iphone.
If it's upside down and reversed, go to parameters>field tab, then swap the galvo 1 to galvo 2.
Hi,
Newb here. Where do you get the image for running the test engravings that you did? I have my OMTECH 20W fiber laser being delivered today and could use all the help I can get. Thanks
Hi Jeffery,
What material are you using in this video?
Thanks
Hello I know this is an old video but is there a chance we can download the test files used?
Have you tried trying this on gold ? Would be interesting to see if you can create any colours or mirror polish ?
How could I get your file, could you help me please collect the file.
hi , i just bought a 20w laser machine and im struggling to find the right parameter settings for marking/engraving gold products. can someone help me?
How far is the field? I'm having the same issue with copper, as my focal length is F420 I figured the laser just doesn't have the blast power with that FL, I bought a F160 lens... luckily I'll be able to obliterate copper... I assume Copper has the same issue.
@@RiderRickMaker mine is a f=163mm lens. I have tried marking using settings for brass and got quite a nice white finish on the marking. Maybe because brass density is almost the same with 24karat gold.
parameter settings i used:
passes/loops = 4
speed = 1500
power = 90
frequency = 60
@@yusamirulhaziq5920 wow! Thanks! I will try to do it once my new lens arrives, yeah, and if you're using 60khz at 90% with a 20W laser and get a nice surface finish, I assume I'll be ok (I have a 50W beast!)
Hello Jeffery. I’m trying to mark a curved surface, but can’t get clear marking all the way round. Do you have a solution for this?
Switch to a longer focal length lens like a 300x300, this may help.
Great video but I got quastion: so I got 2x fibers one 50w and other is 20w but 20w got 1-1000 freq. Where do I use this and for what?
The 20w almost more powerful that 50w China model and 20 w is TurcMark sos laser.
It probably be setting issues.
Can you provide the EZCAD file with the test pattern? I'd like to try it on my machine
Nice video. Just a question if I may. If you dont get a satisfactory color on a mark. Is it practical or possible to re-mark without moving the material. Lets say we are working on stainless steel for example. Thank you
Yes you can mark again as long as you don't touch, bump, or move the material at all. For color, the results may be a little unpredictable when re-marking.
Hello where did you get the Cards from please ? im de to get my fibre laser soon and would like to test setting this way
Hay algún vídeo como este pero en español?? 🙁😢
What parameters for brass?
Hey Jeffry, I am trying to put a black mark on 11 ga. mirrored Bronze plaque. The size of the plaque is 11.5"x 7.625" almost the size of a sheet of paper. I am brand new at this. I just bought my 60 watt Fiber MOPA Laser. any help with settings or if a plaque this big can even get a black mark would be appreciated. I am using a 300x300mm lens by the way. Thank you
FYI I tried to email you but it came back as undeliverable
would this work on metal plated buckles?