Powerstroke Diesel Tech (everything else too) US General tool cart tour!!!
HTML-код
- Опубликовано: 21 сен 2024
- In this video, I take you on a tour of my GREEN US General 5 drawer with deep compartment tool cart.
Tools and items featured include:
Harbor Freight.com
US General tool cart
US General magnetic accessories
Doyle flush cut pliers
Pittsburgh tool dolly
Doyle Demo Screwdriver set
Snap-on.com
Flank drive plus SAE and metric wrenches
Slotted and Phillips head screwdrivers
Torch400, neck light, Cyclops light
Hose picks, Trim tools, Pry Bars
Long and Short pick sets
CT761 Cordless 3/8 Impact
CTS661G Cordless Screwdriver
3/8" & 1/4" drive Flexhead Ratchets
3/8" drive air Impact 1/4" drive air ratchet
6 piece pliers set, 3 piece 1/4" drive ratchet set
3/8" drive impact wobble socket set metric
SAE and Metric midlegnth flank drive plus sockets
Dewalt.com
DCF894 Mid torque 3/8" drive impact
DCR006 Bluetooth speaker
DCF682 Gyroscopic Screwdriver
DCB112 Cordless 12v Flashlight
Various bits and a small case
Aviation/Tin knips
Cornwell.com
Master 3/8" drive impact socket set
Capri.com
Master 1/4" drive impact socket set
1/2" and 1/4" drive Flexhead ratchets
Astropneumatic.com
SAE and Metric Nano socket set
Master hex socket set
ARES.COM
Magnetic wrench holder, Magnetic bit holder
Hansen.com
3 row socket organizers 1/4" and 3/8" drive
EZRed.com
Double Boxend Flexhead ratcheting wrenches 8-19
Titan.com
1/4" drive palm ratchet
Mac.com
3/8" and 1/4" drive cordless ratchets
RBRT Torx set T8-T60
Master E-Torx set E4-E20
Gearwrench.com
SAE and metric 1/4" drive chrome wobble sockets
1/4" drive 8 inch long ratchet
random 3/8" and 1/4" drive sockets
3 piece 1/4" drive locking extensions
Double boxend ratcheting wrenches 8-19
SK.com
6 inch long precision wire strippers
1/4" drive LP90 11 inch long ratchet
Vimtools.com
1/4"" hex nut drivers (nonmagnetic and magnetic)
Craftsman.com
Locking/stackable bin organizer
3/8" drive 12 inch long ratchet
3/8" drive 5 inch long Flexhead ratchet
3/8" drive SAE and Metric midlegnth sockets
1/2" drive Air Impact
Power tool holder/organizer
Magnetic coffee cup holder
16 Ft. Tape Measure
OEMTOOLS.com
266512 Bit set with case
32 piece bit set w/bit driver and case
1/4" drive ratchet
Amazon.com
Boltster and Bitster
Gripty mat (small)
Wera Master bit set
Lisle glove box dispenser
Monster Mobile tools
3/8"drive SAE and Metric master socket set
Rechargeable light
O'Reilly's.com
Flexzilla Blow gun
Matco.com
Flexhead nonreversable ratchets
/ powerstrokejude
/ bssmallengines
joey_preciado (Instagram)
/ edtheoldtechguy
miguel_martinez__21 (Instagram)
/ slucid1
/ everythingcarsandwelding
/ @toolsmetals2148
/ @redlinegary
/ @matersworkshop6123
/ @josephburgess6481
/ @devinc5857
/ @antonioorozco4896
#psjtoolcartseries
#usgeneraltoolcarttour
#harborfreight
You have a really nice and clean set up. I was really impressed with the variety of different brands you have.
Jude i have been going back over videos of yours i have not ssen. This was a great show of your tools!!
I like the fact it’s loaded to the max , I just can’t get myself to do the same I have a weird thing about having to close and lock it at the end of the day.
It's in my garage, if I was at a shop I'd lock it.
I’m the same way, have to lock mine before I leave
I have watched 10 tool cart videos today and the one thing I noticed nobody's tools looked used. Everything is clean and new looking. My tool cart is covered in grease and my tools look abused lol.
Nice tour Jude. That cart is definitely loaded. You may not be ready for any job with that, but you are prepared for many jobs with your setup. Thanks for giving us a look! 👍👍
Yeah, I still walk to my main box all the time, hahaha, but mostly for specialty tools
@@PowerStrokeJude I hear that!
You got some primo specific storage solutions detailed here. I'll have to watch this 10 times and read the comments over and over to digest it all. The specific holders you have are next level. I went green as well and just used black vinyl tape for my accents. Then I bought the full bank version in Green and Black. Thanks for sharing your video.
Dude, I can't believe I haven't responded to this comment, I'm sorry. Thanks for watching, and if you want to know where I got something from lmk. #greentoolsmatter
Sweet setup! Every square inch used👍🏼👍🏼
Thats such a sweet tool cart! I love how its all green! I want to do a cart build like this!
I am 24 and I have been wrenching alot of years in a gravel driveway! Some day hope to have a sweet setup like you!
lots of great tools. thanks for naming them as well.
Thanks for watching!!! I tried to name everything but if there is something that I missed lmk and I can get you that information!!!
I loved the Doyle demo set so much I bought a second set
It's a good set, that's for sure
OG Gearwrench wrenches...love it!
I have the 3 drawer one in green also and a 3 drawer Mac in green. Facing the bolts outside is a good idea . I’m working on setting up my cart and a design to be able to get my cart out of the house without building a ramp on my steps.
I have the same box in white. Great bang for the buck. Nice vid!
1/4 breaker bar works great as a flexible driver. It’ll get in some compact areas that the nut driver won’t.
Great tip! I'll have to remember that next time I'm working inside a cab. Thanks for watching dude!!!
Very nice 🙂
Thanks dude 🤙🏼 🏝 🍻
Dude awesome tour! That cart is packed Bro!! Nice set up!
Thanks dude! I sure tried to utilize space, lol
For the upper trays attached to the lid you can use the smaller grommets in the holes to keep the Screwdrivers from rambling around and yeah that 3/4" Drive Breaker bar is thick they most definitely come in handy when called upon ....If you want your pry bars to fit in the side compartments you need a Step bit to bore the hole from underneath it will give it a fresh clean circular cut as if the box was purchased like that ...I used a Milwaukee #12 step bit to do the modifications because my handles weren't just Thick they were also too long ...You will most definitely need that Milwaukee step bit because the Harbor Freight step bits do not provide the boring measurement you would need and its very simple you will not over drill because it will penetrate in levels so you will not bore to small or too big you can bore to a precise measurement according to how your prybar handles are designed.....Great video you already know ☕ 😉✌
Thanks for the tips dude! I'm going to make the pry bars fit! But you already know ☕😉🤙
I love green nice color
Yeah, I kinda like it too, lol
Nice box n tools. Hope it brings lot of green at the end of the week.
Thanks dude!
Great video! Its so cool that yoy have some friends paying it forward! True people!
Thanks my other brother! And you guys are all super cool!!!
Nice set up I like the green, Also black with green accents would be cool
I like that combo too, but if I went black I think I'd black it out
Green is the only color hahaha! I had that same cart with the black trim and bumpers before I got my current 6 drawer US general. Great carts for the money, I've had a few of the bluepoint 5 drawers just like it and I don't think id ever spend that kinda money on one again now that you can get the US general. I also had those wrench trays in all my setups until I switched to Toolbox Widgets. I used to love those trays.
#greentoolsmatter lol, you can't beat those carts for the money, the 6 drawer carts are a great deal too. I now work out of a 6 drawer combat green Snap-on cart but wish I had bought a 6 drawer US General. I love your tool boxes, old one and new one
@@PowerStrokeJude Thanks dude! Greatly appreciated! I used to have a Matco Jamestown 6 drawer that matched the old 5s but unfortunately I didn't have a use for it a few years back so I sold it. Then I ended up needing more overflow room again and snagged the US General because I couldn't justify that kind of money on needing more junk drawers lol. Kinda wish I kept the matco one but either way very happy with the Harbor Freight
Those matco flex head non reversible ratchet wrenches are worth their weight in gold!
By far my favorites, they have put in work for sure. Thanks for watching!!!
This was sick
Thanks, I appreciate it 🤙🏼🏝🍻
Awesome video. I like the spacer idea for the screwdrivers
Thanks dude! I hate how the tools flop over without them
My man great video and set up!!
Thanks dude! I really appreciate it!
Wow you have that thing full very nice, looks clean very nice.
Thank you 🤙🏻🏝🍻
Nice setup 👍 I have that same Craftsman stubby ratchet that I’ve had for years
I love that ratchet dude, it's definitely a time saver for me!
Wow the bend in that breaker bar 🤣that's seen better days!
I know dude, it was a battle, lol,
Cool. The nut drivers are super handy. I got a set of super stubby Impact ones for the m12 fuel impact driver. The setup is badass, you can get into some crazy tight spots. I used to think nut setters sucked-go figure.
Good video. Thank you
Thank you, I appreciate you watching 🤙🏼🏝🍻
AWESOME! We've been waiting! Loved the series, and enjoyed being a part of it, thanks!
Thanks dude! And thanks for the video too!
Sick, love the green snap on tools. I’m going to start a collection
That's cool,
Did you start your collection yet?
Great tour Jude!! Love the Green…. I’m the same way with Red…..
Didn’t know you could have a folding tray on the same side as the handle.
Thanks for the tour! Getting ready to move my most used tools into a 5 drawer cart and watching a ton of videos seeing how everyone has laid theirs out. Yours was very helpful and thorough, thanks for putting it together. I think you could do a little better on that top right deep drawer also! I'm planning on setting an Ernst 11 comparment organizer tray in mine, filling it 1/4" hex bits, adapters and drivers and then laying my 1/4" hex impact driver over it. May also put overstock screwdrivers in there that don't fit up top. That set of red and black handled cutter crimpers in your bottom plier drawer is a pair of stakon pliers from Thomas and Betts. Super solid old school tool.
Cool set up👍
Thanks dude 🤙🏻
Bad ace set up! 🤘🏽
Thanks dude 🤘🤘🤘
Great tour Jude ! 💚💚💚
Thanks Howard! I should have used a tripod tho, lol
Pretty dope just got the slate gray 5 drawer cart
That's awesome, my friend @Dale Lucid has the slate gray and he loves it. He used to have it in blue. 🤙🏼🏝🍻
Very nice setup !! 👍👍🔥
I've had and lost SO many tools. I remember a stubby flex head 3/8 was perfect for some of the bell housing bolts on my Mustang II.
Dude, I hate losing tools, what year Mustang did you have?
Like the EZ Red long reach! I need those too but I was looking at Mountain.
That's who most people get them from now, EZRed doesn't sell them anymore. I was actually trying to get a second set from Monster mobile tools.
good video man!
Thanks dude, I appreciate it 🤙🏝🍻
My dad has a white cart an I have the red one. We them last year an I been trying to fill mine up with harbor freight tools. We go once a month. I been getting the Pittsburgh tools an hope I have it filled up by this year. I got the 1/4, 3/8, 1/2 inch sockets and ratchets and extensions that are Pittsburgh tools an the socket trays an I got the wrenches and ratchet wrenches and other tools. I already have a few craftsman boxes filled with craftsman tools. Hopefully I can get back into my garage an do some work on stuff.
I have some riding mowers that need work
That's awesome dude, slowly but surely you will have all the tools you need but then it really gets complicated because you have the tools you need but not the tools you want, lol thanks for watching dude
Great video bud! nice set up! Keep on posting!
Thank you, I will! I appreciate you watching!!!
Brother very nice set up !!!!!
Thank you! And thanks for checking out my video!!!
Awesome cart video.....commented, liked and subbed!
Thanks dude I really appreciate it 🤙🏝🍻
Awesome vid cool cart setup
Thanks dude, it running out of space, lol
I’ve got the 2 drawer Yukon joint I was brand new in a shop and had to get more then just a cart so I still have it and make it work I also have a bigger box not a tool truck one but I keep mostly bigger stuff in the box and then my cart I use has basically everything I use daily
Brother you have a fantastic cart my man
Thank you, I really appreciate you watching!!!
Absolutely bro
Nice setup 😃👍
Thanks Dave!!!
awesome
Thanks dude 🤙
The gorrilla glue is the coolest tool in the box LOL!!!
🤣🤣🤣
Hey are u gonna be on Ed the old tech guys show tonight at 8pm cst 9est???
i think your video is vary interesting thanks i learned some
That craftsman cup holder is gonna be a fucking most wow thank you
I use it all day long, coffee ☕ in the morning and monsters and waters the rest of the day
Powerstroke loves his Astros but his color palate is green and gold like the A's 😁
Lol, you got me there dude
Really well thought out tool layout. I need to work on mine, it's messy.
As soon as I saw that Capri ratchet with the goat head on it I went to Amazon and ordered one 😂 didn't need it but it had a goat head on it and it reminded me of my favorite band lmao
🤣🤣🤣 that's too funny
@@PowerStrokeJude lmfao my favorite band is slipknot and they do alot of stuff with goat heads so as soon as I seen it that's all I could think of then I went on Amazon and they were on sale so I said fuck it lol
@@ThatGuyJayDub heck yeah, that's as good a reason to buy a tool as any I've used, lol
yesss i got the green and am also a diesel tech hell ya bud
Nice cart tour Jude
Thanks dude!
I'm working on my video also just super busy last few weeks
I'll dm you the hashtags!
@@PowerStrokeJude you already did Jude like a week ago
Great video brosuf!
Thanks dude!!
I have found that them little gorilla glue lasts 50 times longer if you put it in a fridge
I'll try that, thanks
@@PowerStrokeJude no problem bro just a trick I have learned over the years especially if you use it once and then don't use it for a year the bottle will be hard fridge helps keep the glue soft
How do you remove the chrome trim and put those black trims? I’m having a hard time pulling out the chrome pieces
If I remember correctly they just slide right off. @Dale Lucid has a video on his channel of all the upgrades and modifications that you can do to a US General 5 drawer tool cart. Thanks for watching 🤙🏼 🏝 🍻
I use my can holder tray for flashlights also lol
Lol, works perfectly for that
Man dude you have a bunch great tools I am a bit jelly
Thanks dude!
What's the name of that snap on pocket knife
Love the way you have your box setup, completely different than most of what I've seen here on the tubes. You can tell it's driven by a lot of years of you perfecting your system!
What wrench organizer is that? Dig how compact it is!
The set up is different but it works, lol here is the link to that wrench organizer
TOOL SORTER WRENCH ORGANIZER
(BLACK) | Space Saving 28-Tool Tray | Fits in Most Tool Box Drawers | Professional Quality Tool Organizer | Made in USA www.amazon.com/dp/B00H49FD8E/ref=cm_sw_r_apan_glt_fabc_SXB5S9R2PP87KTSVXV68
BTW I subbed to your channel!!!
@@PowerStrokeJude thanks sir!
I’m considering buying one of these harbor freight tool carts for myself. How is your box holding up? Do you recommend it for the diy auto mechanic?
Sure, it's holding up fine. I do recommend buying 2 swivel casters when you buy the cart that way you have 4 swivel casters (cart comes with 2 swivel and 2 fixed) easier to move around the garage
Wow that breaker bar got a huge curve lol
That’s what she said...
@@TurboTyTy lol bro
I still use it when I need to, lol
Where did you get that magnetic ratchet holder from?
Thanks for the tour.nice setup. Do you have anything holding the lid open or just the struts?
Just the struts, but now that you mention it I should probably have a back up plan, lol,
I like it
Thanks dude, I really appreciate you watching! It has changed a little bit lately, lol
I would trade all my knipex red grips in for green grips, I'm gonna have to hunt ebay for those, that's a great idea to have a in car/truck service that stays clean
They are rebranded Monster mobile tools and I was having a hard time tracking them down so i asked Justin Dow if he would sell me his and he said they're yours just come up and get them. Having a "clean drawer" makes it so that I dont have to stop what I'm doing to wipe stuff down, I can just continue working.
Here’s some www.jensputzier.com/tools-by-brand/reca-green-tools/green-pliers/?fbclid=IwAR2eNsdWWFncFxUxcBkibWtAA11kNrNmT60AWrBMnya0O1QFEHkJ0_MgY_o
@@shwa8814 thanks for that link. I'm going green on my cart and want these badly.
Man been getting parts and miss the video I was hoping to be the first one 😂😂😅😂😅
Lol, your good dude!!!
I forgot I wanted to get that bitster!
It's a cool little tool, I like it and the Boltster
Sweet setup man!, lol that breaker bar looked like a banana!!! How big was the pipe you put on it ?
It was a biggie that's for sure, lol
Saludos hermano!
🍻🍻🍻 hombre!!! Encantado de conocerte gracias por mirar
great tool cart. i get everything in green as well
I am pleased to see no ryobi
🤣🤣🤣 yeah, I don't own any Ryobi
Is there any way of not paying for shipping for the green cart? Says online only shipping and I don’t think they offer free ship to store
you use the snap torch for dabs and is it worth it ? lol
No, lol
Uploading my video now.
It was awesome hombre!!!
Does that power tool holder on the side allow the lid to close?
Yes, it does not interfere with the lid
Thanks for watching 🤙🏼 🏝 🍻
Where did you get the green socket holder?
If you are talking about the green triple holders, Those are Hansen I think, but a few companies make them now.
Dewalt gyroscopic screwdriver
Yeah, I had a brain fart on that one, lol
@@PowerStrokeJude it happens bro lol
where the spanner tray from ?
I bought it off Amazon, here is the link:
www.amazon.com/dp/B00H49FD8E/ref=cm_sw_r_cp_apa_glt_fabc_KNTMQGPWB7N7TE68Z7Q1?_encoding=UTF8&psc=1
Thanks for watching dude!!!
cheers for the link bud
I was just about to ask that. Save a ton of space, love it.
Women with clothes,,man with tools it never end
True story, lol, thanks for watching!
we all know why you got the snap on torch on stand by we all know you taking globbers
🤣🤣🤣
Stop moving the dam camera men!!
Sorry dude,