I look at mr. Wayne video good on teaching people how to fix their own golf carts y'all look and learn he has good videos Cajun land Church Point Louisiana
Sorry for poor camera work. Nobody to blame but me. I am a 1 man show ( 1 old guy ), and I try. I concentrate on the task instead of the filming, sorry. I will try to do better. Thank you.
Wayne, great video. I have a 2011 Club Cart Precedent and the brakes are not asy to engage. Though after a few times they will catch. Does this call for an adjustment or brake pads being replaced. TIA ... btw NOT SURE WHAT THE 2" INCH IS ALL ABOUT?
Could be both. Start by adjusting under the floor. IF that doesn't help, look at brake shoes and mostly the star wheels, they wear out, and should be replaced when replacing shoes.
you can loosen the cables if they are too tight, but thats not the real way to do it. Its actually quite a process on the old ds carts. I suggest you buy a service manual for that cart. I have pdfs of most manuals on my website.
Hi Wayne, the parking brake lever is engaging every time I depress the brake. The only way to release it is to press the accelerator pedal. Any easy adjustment for this, or do I need a new parking brake release rod?
Not many electric carts have brake fluid. If you park the cart in a clean area and pump the brakes a few times, you should see about where the leak is by the spots on the floor. Should be fairly easy to locate the leak, unless you have a tomberlin, then you have a big headache.
I will try to make a video like that. I havent been making videos lately that I have to bend over on, because of my back issues. I will make one though. Meanwhile there are videos by others that show how to do it.
@@waynemartin.waynesgolfcart4900 Thank you. I have looked on youtube for hours and I have not seen anyone make a video on how to install brake pads on a club car with self-adjusting brakes. Thanks again.
@@waynemartin.waynesgolfcart4900 that is true. I've read a few of the online service manuals and they all say I would need a 90° snap ring pliers to remove axle retaining ring in order to pull the axle shaft from the axle tube. Do you know if I can get around that without using a tool (90° snap ring pliers) which I don't have? Do I need to remove the axle shaft? This is the part that the wheel is bolted on. It does look like it would be easier to work on the brakes if this axle shaft was removed first. What are your thoughts?
Yes, it is easier with 90 degree snap ring pliers. However, you can still do a brake job without removing the axle. But if you want to remove the axle, then you definitely need those pliers.
Not sure what you are calling a brake rod? Is it the piece that goes between the brake cable equalizer and the pedal assembly? The rod with threads that the 2 nuts are on?
I'm at a loss 1995 club car ds New breaks New drums After Markit springs Spray with break clean Adjusted cable Apply break won't stop just a little drag Any ideas ?
Wayne, My first cart 1989 Club Car DS. Does the brake adjustment have top access also? And my cart runs good but i hear a intermingling rattling noise from the rear of my DS Electric cart...What should I check first
No, there is no top access for your brakes. You have brake shoes and brake drums like a car does. Your 2 brake cables come to an equalizer bar, under the cart about where the drivers feet rest on the floor. You can crawl under there and see the cables. You can even tighten the cables under there a little if needed. As far as a noise, are you saying it is coming from the brakes? If it sounds like scrapping it could be worn out shoes, could be an axle bearing, or even coming from the motor. Try to narrow it down.
I apologize for the poor video quality. I am an old guy with no experience or knowledge of that stuff. My intent was to help others fix their golf carts, nothing more. I will try to do better.
Just bought a refurbished Precedent and the brake pedal travel is excessive. This video perfectly shows me what I can do as a DIY fix.... Well done.
Great film; direction perfect. The location of the 2" tape was foggy, but easy enough to work out and, the brake now works perfect. Tks.!!
Wayne you have so many great videos
Wow, Thank you
I look at mr. Wayne video good on teaching people how to fix their own golf carts y'all look and learn he has good videos Cajun land Church Point Louisiana
👍
Sorry for poor camera work. Nobody to blame but me. I am a 1 man show ( 1 old guy ), and I try.
I concentrate on the task instead of the filming, sorry.
I will try to do better. Thank you.
Wayne, please have the camera person slow down it gets a person dizzy.
Wayne, great video. I have a 2011 Club Cart Precedent and the brakes are not asy to engage. Though after a few times they will catch. Does this call for an adjustment or brake pads being replaced. TIA ... btw NOT SURE WHAT THE 2" INCH IS ALL ABOUT?
Could be both.
Start by adjusting under the floor. IF that doesn't help, look at brake shoes and mostly the star wheels, they wear out, and should be replaced when replacing shoes.
@@waynemartin.waynesgolfcart4900 THANK YOU VERY MUCH!
What I'm saying, is they are self adjusting brakes. The 2" is the correct adjustment, which you do in the floor hole.
Are the brake on regular clubcar sme as carryall
Should be
Wayne how to adjust brakes on a DS club car. My brakes grab and almost throw you out of the cart. Is the cable the problem. Thanks
you can loosen the cables if they are too tight, but thats not the real way to do it. Its actually quite a process on the old ds carts.
I suggest you buy a service manual for that cart. I have pdfs of most manuals on my website.
Hi Wayne, the parking brake lever is engaging every time I depress the brake. The only way to release it is to press the accelerator pedal. Any easy adjustment for this, or do I need a new parking brake release rod?
What cart fo you have?
Leak of brake fluid on an electric club car...how to diagnose and repair
Not many electric carts have brake fluid. If you park the cart in a clean area and pump the brakes a few times, you should see about where the leak is by the spots on the floor. Should be fairly easy to locate the leak, unless you have a tomberlin, then you have a big headache.
My parking brake will not lock, and is very stiff. But the brake pedal works good. Help..
What year and model cart do you have?
Good video. Can you do a video on installing brake pads on Club Cars with self-adjusting brakes?
I will try to make a video like that.
I havent been making videos lately that I have to bend over on, because of my back issues.
I will make one though. Meanwhile there are videos by others that show how to do it.
@@waynemartin.waynesgolfcart4900 Thank you. I have looked on youtube for hours and I have not seen anyone make a video on how to install brake pads on a club car with self-adjusting brakes. Thanks again.
To be clear, all precedents, and all late model DS carts had brake shoes and brake drums, and they are ALL self adjusting.
@@waynemartin.waynesgolfcart4900 that is true. I've read a few of the online service manuals and they all say I would need a 90° snap ring pliers to remove axle retaining ring in order to pull the axle shaft from the axle tube. Do you know if I can get around that without using a tool (90° snap ring pliers) which I don't have? Do I need to remove the axle shaft? This is the part that the wheel is bolted on. It does look like it would be easier to work on the brakes if this axle shaft was removed first. What are your thoughts?
Yes, it is easier with 90 degree snap ring pliers.
However, you can still do a brake job without removing the axle.
But if you want to remove the axle, then you definitely need those pliers.
I have a 2014 precedent and my brake rod is rusted out. Do you have the part numbers so I can by a replacement?
Not sure what you are calling a brake rod? Is it the piece that goes between the brake cable equalizer and the pedal assembly?
The rod with threads that the 2 nuts are on?
wayne martin yes
1025594-01. Also aftermarket number is 5949
I'm at a loss
1995 club car ds
New breaks
New drums
After Markit springs
Spray with break clean
Adjusted cable
Apply break won't stop just a little drag
Any ideas ?
Did you replace the star wheels?
Wayne, My first cart 1989 Club Car DS. Does the brake adjustment have top access also? And my cart runs good but i hear a intermingling rattling noise from the rear of my DS Electric cart...What should I check first
No, there is no top access for your brakes.
You have brake shoes and brake drums like a car does.
Your 2 brake cables come to an equalizer bar, under the cart about where the drivers feet rest on the floor.
You can crawl under there and see the cables. You can even tighten the cables under there a little if needed.
As far as a noise, are you saying it is coming from the brakes?
If it sounds like scrapping it could be
worn out shoes, could be an axle bearing, or even coming from the motor.
Try to narrow it down.
wayne martin share.icloud.com/photos/0KEPSvQqgWBfU-J6hb8cpzmkQ
Thanks for your help I’ll try to narrow it down the best I can
Nice video and informative but, your lighting is too poor. Your self adjusting aperture on your camera is not cutting it and video is difficult to see
I apologize for the poor video quality.
I am an old guy with no experience or knowledge of that stuff.
My intent was to help others fix their golf carts, nothing more.
I will try to do better.