If you have new version t1c with new logo "3 circles with Q C Y" on it then hold both buttons with earbuds in case 10 seconds when borh starts blinking red and white you have successfully paired both together ❤
Brother.. First thing is to do is, Remove and Connect the right earpod only with Bluetooth and after it connected Remove the left earpod from mother box. And keep direct to your ear.. In this case the left one will find its patner .. I think this reply might be helpful I am using it the same way. Thank you
Bought 4 pcs, 3 t1 and one t1 pro as gifts and for myself... thank you for the low budget high quality build earbuds! Also recommended to my colleagues
Although ive followed all the instructions attached in the box and what youve done here. I cant hear any noise from my left earbud still it works for pausing the music
Had this issue since a year...Thanks for this video.. managing this pairing issue was a pain.. no doubt I love the airbuds... but man I never use to get hang of this.. there was point I wanted to throw them off.. finally solved .. can’t thank you enough.. cheers!
Thanks! Worked! I swear those earbuds are more reliable and better mic quality then the SoundCore life air 2 ones that I have. Now they keep cracking and shit mic is awful as well since before.. pff
When I hold the MFBs the lights dont blink for 3 times but rather they keep blinking continuously and don't stop. I have held the MFBs for over one minute but they keep blinking red and white, any suggestions?
I ll get straight to the point this is a useful well made product that in my personally hard used and abused . But still grate sounding well equalised performance with low mid & even well done base . With good fittings. No touch cuz that always accidently happens 😅, with great battery life .. its the crossed to a wired headphones, if not better .. thanks for reading ✌
Thanks it worked. I think the title of the video should be changed to "QYC not pairing solution" or something else someone could easily find it. Took a while to come cross this video. #QYC
Cant even turn them off. Mine keep blinking white. And not red and white. Red lights work while charging and each earplug works on its own. Downloaded app. Both appear fully charged independently.
After I power them off, when I hold them again, no matter for how long I hold them they don't stop blinking red and white. I've been holding them for a minute. Please help.
Dear friend you could reset first (Please try the following steps, in case you fail to build connection.)Power off two EarBuds and tap and hold MFBs on both of them for 20s (LED will blink red and white then turn off and 10s later blink red and white 3 times). Tap and hold two EarBuds for Is to power on(LED blinks red white twice) and two EarBuds will auto pair with each other. Then right EarBud will auto enter pairing mode(LED blinks red and white) when LED on left EarBud turn off. On cellphone, search for QCY-TI R and tap to connect both EarBuds with cellphone.Notes: if two EarBuds fail to pair with each other in 20s, they will enter pairing mode(connectable to cellphone).
I am having the same issue. I continue to hold them but they fail to connect to each other. I’ve used these headphones for a while now and they were working fine up until a few months ago. I had no trouble at first. I’m so upset.
@@Qcybrand My left earbud won't stop looking for devices (blinking blue & red) no matter how long I keep pressing. The right does turn off and resets normally, tried every solution I could find on the internet, would appreciate any help.
OK, so just bought mines and I'm having issues turning on the right ear bud however, I leave it on its charge slot it would come on and blink red and blue. I left it on the charger over night and tried this and only the left connected. Should I call the company and get a new one or just purchase another one?
I have a qcy qs2 ,when i open earbuds,nd put it down in side the box not charging earbuds,nd when i gonna charge the box it cant show the charging lights
I bought one from Online Noon . When i put it in charging only one time its light blink then stoped nothing is showing . Now i am confused is it charging ? What to do
I had the same thing (lights keep blinking when trying to reset.) The reason the factory reset doesnt work is a hardware issue in the earbud that died (for me it was the left one.) After opening I noticed that one of two (red one) wires going to the tiny ear speaker had come loose. It's super tiny and beyond my soldering skills. Either repairing or getting a new pair will get you working earbuds again :)
Hi can you please help me with my Qcy Tc1. The right bud suddenly doesn't pairing with my phone. I tried to hard reset it but i cant turn off the right bud. Even i pressed hard it doesn't shutting down. What to do pls. Help me
I have a problem, both earphones are connected but only one earphone is playing sound and the other one isnt. I tried resetting it, forgetting the device etc. Nothing worked
If you have new version t1c with new logo "3 circles with Q C Y" on it then hold both buttons with earbuds in case 10 seconds when borh starts blinking red and white you have successfully paired both together ❤
LOVE YOU MAN
Thnxxx ❤
Thanks bro
Para os que não estão conseguindo : coloque os fones na caixa e aperte os botões até eles piscarem, remova-os e observem eles parearem magicamente!
Cara, passei dias procurando uma solução e a sua foi a única que funcionou. Muito obrigado!
Obrigado, cara!! 🙏🙏
Gracias!!!!!🎉
te amo
Nro 1! 👆🏼
I had problem where my left earbud didn't pair with the right one, it solved me the issue - thanks
Brother..
First thing is to do is,
Remove and Connect the right earpod only with Bluetooth and after it connected Remove the left earpod from mother box.
And keep direct to your ear..
In this case the left one will find its patner ..
I think this reply might be helpful I am using it the same way.
Thank you
ruclips.net/video/OcZbKbJW_aI/видео.html
Same problem..thanks to u the issue was resolved i was about to go back to shop who sold me this
Same here..problem solved
Thanks. It was a great help
I was so frustrated, I was ready to break them haha After following your steps I was able to listen to my music again. Thank you so much!!
You are my savior! I thought that i had to replace it because it felt hopeless trying to pair. Thank you so so much for this! God bless!
Bought 4 pcs, 3 t1 and one t1 pro as gifts and for myself... thank you for the low budget high quality build earbuds! Also recommended to my colleagues
Thank you very much for your support of QCY
Thank you!I accidentaly unpaired them from my phone and couldn't recconect both of them.I love these earbuds!
I have QCY T7. It was have low volume problem. This helped me lot.
Please try to set the absolute volume of the phone.
Thank you so much I struggled for days to connect them both together cause each time only one of them would work at a time... It's brilliant!
Although ive followed all the instructions attached in the box and what youve done here. I cant hear any noise from my left earbud still it works for pausing the music
Santiago Deandrea same
Same and no lights either
The same
yeah wtf this video is retarded, why would i wanna pair one earphone?
Same here problem
U solved it very easily I had issues with this for 6 months man
Sinir krizi geçirmek üzereydim. Çok teşekkürler
Had this issue since a year...Thanks for this video.. managing this pairing issue was a pain.. no doubt I love the airbuds... but man I never use to get hang of this.. there was point I wanted to throw them off.. finally solved .. can’t thank you enough.. cheers!
Thank you so much, I had to try it at least 5 times, then it started work !
Thanks! Worked! I swear those earbuds are more reliable and better mic quality then the SoundCore life air 2 ones that I have. Now they keep cracking and shit mic is awful as well since before.. pff
Thank you so much. I just bought them and I thought they were broken but this video helped me a lot
so helpful. I thought mine was faulty. Glad I found this guide
When I hold the MFBs the lights dont blink for 3 times but rather they keep blinking continuously and don't stop. I have held the MFBs for over one minute but they keep blinking red and white, any suggestions?
Me too. I don’t know why
I ll get straight to the point this is a useful well made product that in my personally hard used and abused . But still grate sounding well equalised performance with low mid & even well done base . With good fittings. No touch cuz that always accidently happens 😅, with great battery life .. its the crossed to a wired headphones, if not better .. thanks for reading ✌
Thanks it worked. I think the title of the video should be changed to "QYC not pairing solution" or something else someone could easily find it. Took a while to come cross this video. #QYC
That's a good advice!
This worked! Thank you!
Thank you for the video. Even for a cheap earbuds you still made effort for your customers. Thumbs up for that!
Thank you so much! I've got a success! :)
Thanks for your video..it help me a lot
Thks you so much Almost threw this away
Can I use only one, and other one will charge
This is very helpful! Thank you so much for this video.
It solved my issue... Thanks for the demo
Always help me when I have trouble with pairing. Thanks a lot for this video! 🙂
You are amasing😂🙏😱
It worked. Thank you..
i never thouht to pair so easely for this video thanks
it is my honor
Thank you it worked
This solved the issue, the left one wasn't pairing... thanks
Thank you so much for the step by step video
Thank you soo much for this video ❤️.
Thx man
u save my day
U are a legend! Thanks!
Thank YOU. Works just fine..just be pacient
thanks for help its working
I loved the Kukijiro Ost
Helped a lot thanks
Thx for this video
Thanks, it worked 👍
Before doing any of that, which one of the ear buds should be connected to the Bluetooth? The left or the right? Or none? More specific details please
Perfect - Thank you!
After powering them down i hold MFB again and the red-white light starts blinling but.it doesnt stop as shown in the video
hi friend please press it longer until it stops, if it still doesn't work, please contact your seller
That's it! Many thanks!
Omg thx
Thank you its 100 sure my headphone its not pair but i trend youtmr idea its work
thank you from Thailand
Tysm it was help full🤭😍
Can I use only one, and other one will charge
Thank you for this.. I lost my manual...
Thank u ❤️ almost crushed these
Works thank you
Why does the left ear bud turn on instead of right
same here
Same it's so frustrating
Thanks for the help..solve the issue..
Worked well..
My issue got resolved..
Thankyou
Thank a million it is succesful
I did it exacly as said but still only hear the right one
Thnks bro.......
Thank you man
Thanks. Worked
Cant even turn them off. Mine keep blinking white. And not red and white.
Red lights work while charging and each earplug works on its own.
Downloaded app. Both appear fully charged independently.
After I power them off, when I hold them again, no matter for how long I hold them they don't stop blinking red and white. I've been holding them for a minute. Please help.
Dear friend you could reset first
(Please try the following steps, in case you fail to build connection.)Power off two EarBuds and tap and hold MFBs on both of them for 20s (LED will blink red and white then turn off and 10s later blink red and white 3 times). Tap and hold two EarBuds for Is to power on(LED blinks red white twice) and two EarBuds will auto pair with each other. Then right EarBud will auto enter pairing mode(LED blinks red and white) when LED on left EarBud turn off. On cellphone, search for QCY-TI R and tap to connect both EarBuds with cellphone.Notes: if two EarBuds fail to pair with each other in 20s, they will enter pairing mode(connectable to cellphone).
I am having the same issue. I continue to hold them but they fail to connect to each other. I’ve used these headphones for a while now and they were working fine up until a few months ago. I had no trouble at first. I’m so upset.
@@munierah4 look at QCY's reply to my comment, see if that helps.
@@Qcybrand My left earbud won't stop looking for devices (blinking blue & red) no matter how long I keep pressing. The right does turn off and resets normally, tried every solution I could find on the internet, would appreciate any help.
seems to work for me. Thank you
My QCY T1 Pro have the same problem but this one solvedvthe issue. Thanks! BTW how do I use only 1 right earbud?
Thanks you very much!
Omg! Its working :) thank you HAHA
Hi?
In my case the left keeps appearing on the devices list trying to connect by its self
i bought a pair of qcy-t1c and only the r earbud works,the l one just charge.help me please
If i want te reset them mine will stay blinking red and white. Slower than on the video. Any ideas?
This method doesn't function for my earbuds...Tried to hold both the button for whole a minute.But it continues blinking as 0:35 of this video 😫😫😫
OK, so just bought mines and I'm having issues turning on the right ear bud however, I leave it on its charge slot it would come on and blink red and blue. I left it on the charger over night and tried this and only the left connected. Should I call the company and get a new one or just purchase another one?
Excellent guiding 🤩
Lights still shining after 20s,what should I do.I tried hold them even 1 minute
Michał Herka Same issue!
@@munierah4 Try connect them to other device,for example PC.It solve my problem
Solved! Thanks!
it‘s my honor
Can't pair it with win 7 because driver issue, any help pls?
I love this earphones they are smaller than samsung galaxy buds so that mean i can sleep with the Qcy t1c
can you pair two right buds?
Thank you
It is my pleasure, please contact me if you have any questions
Very helpful..thanks
Thank you so much
My Right earbud doesn't blink at all only my left one does help me please
Workedd thnkuuu
Sonunda oldu!
I have a qcy qs2 ,when i open earbuds,nd put it down in side the box not charging earbuds,nd when i gonna charge the box it cant show the charging lights
Tutu Biswal thats an another
I bought one from Online Noon . When i put it in charging only one time its light blink then stoped nothing is showing . Now i am confused is it charging ? What to do
I have a problem. When i press the MFB they dont blink red and whit for three times, they just keep blinking what can I do?
I had the same thing (lights keep blinking when trying to reset.) The reason the factory reset doesnt work is a hardware issue in the earbud that died (for me it was the left one.) After opening I noticed that one of two (red one) wires going to the tiny ear speaker had come loose. It's super tiny and beyond my soldering skills. Either repairing or getting a new pair will get you working earbuds again :)
Having Same issue with my bud
The left one connected. Button is worked but there isn't any sound. Can someone help ne ?
Thanks a lot
Yes ok, but the led of the right one keeps blinking, and if you try to put it in the charger, Bluetooth doesn't disconnect
Hello, can you tell me what color is the light?
I can't hear any sound on the left earbud but the buton works
Me too, but in the right earbud. Why?
GRAZIE❤
Hi can you please help me with my Qcy Tc1. The right bud suddenly doesn't pairing with my phone. I tried to hard reset it but i cant turn off the right bud. Even i pressed hard it doesn't shutting down. What to do pls. Help me
Thank you so much it helped me 😊🥰
my pleasure
Thanks man
The light of L earbud never on , I cannot pair up with the right one
Tnx
Mine doesn't connect to the APP, these headphones of yours give a lot of trouble!
I have a problem, both earphones are connected but only one earphone is playing sound and the other one isnt. I tried resetting it, forgetting the device etc. Nothing worked
Please make sure the headset is fully charged. If it can't work, please contact the seller directly.
@@Qcybrand it’s fully charged, also I’ve had this earphones for 2 years no issues. Isn’t the brand to blame?
@@skullcrusher5424 Sorry. This is out of warranty
@@Qcybrand damn it.