I pulled the trigger on buying one of these after much consideration and let me tell ya I absolutely love it. I know the price is what will most likely drive people away from this gun but you get what you pay for and it’s a small gun that produces grand results.
I have the ani r150 and my boss got the dv1s I used it today and thought it was amazing but the r150 still gets the job done at a fraction of the price
Nice review Gunny, you may know that I won a DV1S in a competition and I was one of the first (private customer) in the UK to have one and have to say that I love it but at the price I wouldn't spend my own cash on it. You didn't mention if you think it's better than the SRI ProLite so it would be nice to hear your opinion but IMO it does spray better than the SRI and has a better and bigger fan pattern. Thanks for your kind words on my detailing and ceramic coating job on my Merc SLK Gunny, the car is now 18 years old and I've had it 6 years, apart from the wheels it's pretty much in mint condition. I'm not getting any younger so found the complete job hard going but I'm hoping it will make the job of looking after easier in the future. John UK
I just painted some knife blades while they were hanging from a close hanger and i used sata jet 4400 b and at 33 psi it was moving the blade a lot it was like hitting a mobing target
I purchased the r150's then r160's so now have 5 mini guns which I think is enough. Just had the air cap seals go on the r150 purchased a p pack from sprayguns direct all good again now. Good video though Gunny
I just layed down my first basecoat with this gun and about to shoot my clear with it now. I got mine for $365 USD. I only have a FLG 4 full size gun and lety me tell you, putting base down w this was AMAZING! Its got and amazing fan and it lets me pile it own! Now I am about to see about the clear. I got the 1.2 and the HVLP plus cap
@@moarif9139 I am not a compressor specialist all I know that the belt driven ones are perfectly fine as long as it's not too cold but this gun is absolutely the best gun there is I have tried them all All brands all makes high and low end harbor freight you name it this gun right there is all around you can do anything with this gun absolutely phenomenal
@Jan I've never sprayed in my life but am confident I can do it. It's an expensive purchase but I'm willing to buy it. So am I correct in thinking I can use the same gun for primer, paint and lacquer
@@moarif9139 i have a primer gun ( 80 buck eastwood , very good ) And i have 2 of the devilbiss sv1 . One for paint , one for clear . I have been doing this for 16plus years . You can use one gun for all make sure you clean it very well before and after each application
Thanks for another spray gun review. I got a black DV-1 demo gun a while back, but never even used it. I dunno, TE-10 in one prolite, TE-20 on another with 1.3's... and I leave another 1.4 TE10 prolite on the side for 2k direct gloss. Don't know if I'll ever change. The Sri pro lite treats me well too.
These days the way I see it, if you are capable of doing the work yourself, buy the best quality tools, even if you may not really want to pay for them. As long as it won't cause you real hardship. You'll get the best result possible, they'll usually pay for themselves after only one job [maybe not SnapOn :)] and will most likely last more than your lifetime if cared for properly. For spray guns the difference [other than SATA] is only a few hundred dollars anyway
Hi Gunny! First, i want to thank you for the best free videos, that you can get from internet, absolutely! I have follow you for years, and in some comment i did thank you for leaded me in the best hobby ever! I have learned to spray. well, moderately "well". Lol. I have watch your videos so many times, and been listen what you had to say.. One thing getting in my mind, when you post "Top ten" or those compare videos, if you put those guns side by side, and think what price/ value they have, could you tell, which guns are best, no matter what price they have..? Just mention..? For examble "Top 8 mini guns", Sata 4400, obviously is better gun than winner, ANI r150.. I hope you can reed my English, lol..!
I think it’s a lovely little mini gun, the s1 cap was my cap of choice, good size fan as well, probably one of the most comfortable sprayguns I have held in my hand ✋🏻, it is quite expensive I will add , almost a few bucks away from a Dv1 base on eBay. But comparing this gun to an Sri I prefer the Dv1s. Sri just feels too heavy in comparison and not quite as comfortable. Either way appreciate your opinion cheers 🍻
Hi Gunny! Which one you think is better for someone who does not have big air compressors? I only have 2hp with 88ltrs of tank. My air compressor can sustain the SRi prolite. Do you think my air compressor can handle this hvlp dv1s? What is your opinion in regards to spraying clears, sri vs dv1s? does the difference huge?
If this was a sata you would have killed it for the price point Not a sata fan btw could you compare this to the 4400 there similar but sata is slightly cheaper
lph101 is a true small gun , very good for mirror caps , tow hook covers and gas tank covers . this beast is a more of a midi gun . can literally do EVERYTHING.
Hi I love watching your videos! Just need some advice mate,I'm relatively new to spraying and bought a devillbiss gti hd gun recently, it says 12 bar on handle of gun,does that mean I have to use 12 bar compressor or is it just to say that 12 bar is the maximum compressor I can use with gun,currently I'm using a 50 ltr, 8 bar compressor, any advice much appreciated mate Thanks
I generally run it at 29psi, but the volume it uses of more important if you have a small compressor. Check the CFM or LPM on DeVilbiss website, then cross-reference with your compressor to see if your compressor will run it.
I think devilbiss finally learned that rubber and plastic air distribution rings or any gun parts are NOT a way to go as every part of this gun is solid . no cheap plastic that kept breaking on me on my older devilbiss and all satas .
your filming looks blurred is it clear coated over spay I use isopropyl alcohol USP 99% from the drug store to clean my safety prescription safety glasses it does not damage them at all, try that on your lenses you will be imprest, I'm a painter
Awesome 👏 video gunny and thanks 🙏 for the review the price is high for a mini gun but what you getting for the money I will buy it gunny straight up just the fan size will make anyone buy it that’s the biggest fan I’ve ever seen on a mini gun hands down much love gunny 👏👏👏👏🙏🙏🙏👍👍👍👍👍👍👍👌👌👌👌👌👌👊👊👊👊👊👊✊✊✊✊✊💪💪💪💪🤙🤙🤙💯💯💯💯💯💯💯
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I pulled the trigger on buying one of these after much consideration and let me tell ya I absolutely love it. I know the price is what will most likely drive people away from this gun but you get what you pay for and it’s a small gun that produces grand results.
I have the ani r150 and my boss got the dv1s I used it today and thought it was amazing but the r150 still gets the job done at a fraction of the price
Nice review Gunny, you may know that I won a DV1S in a competition and I was one of the first (private customer) in the UK to have one and have to say that I love it but at the price I wouldn't spend my own cash on it. You didn't mention if you think it's better than the SRI ProLite so it would be nice to hear your opinion but IMO it does spray better than the SRI and has a better and bigger fan pattern.
Thanks for your kind words on my detailing and ceramic coating job on my Merc SLK Gunny, the car is now 18 years old and I've had it 6 years, apart from the wheels it's pretty much in mint condition. I'm not getting any younger so found the complete job hard going but I'm hoping it will make the job of looking after easier in the future. John UK
I just painted some knife blades while they were hanging from a close hanger and i used sata jet 4400 b and at 33 psi it was moving the blade a lot it was like hitting a mobing target
Thanks my friend, very good here in Brazil we are attentive to your videos.
I purchased the r150's then r160's so now have 5 mini guns which I think is enough. Just had the air cap seals go on the r150 purchased a p pack from sprayguns direct all good again now. Good video though Gunny
I just layed down my first basecoat with this gun and about to shoot my clear with it now. I got mine for $365 USD. I only have a FLG 4 full size gun and lety me tell you, putting base down w this was AMAZING! Its got and amazing fan and it lets me pile it own! Now I am about to see about the clear. I got the 1.2 and the HVLP plus cap
How did it go with the clear?
@@josealvarado-uf3wp No comment so probably horrible. 😁
The DV1 Base gun is amazing, so can’t wait for this one to hit the states. Thanks for the review!
I already have 1 I live in oregon usa
one of the best features of this gun compared to other mini/midi guns is the air consumption.
you don't need a huge air compressor with this gun
would it work with a 3hp 90ltr belt driven compressor?
@@moarif9139 I am not a compressor specialist all I know that the belt driven ones are perfectly fine as long as it's not too cold but this gun is absolutely the best gun there is I have tried them all All brands all makes high and low end harbor freight you name it this gun right there is all around you can do anything with this gun absolutely phenomenal
@Jan I've never sprayed in my life but am confident I can do it. It's an expensive purchase but I'm willing to buy it. So am I correct in thinking I can use the same gun for primer, paint and lacquer
@@moarif9139 i have a primer gun ( 80 buck eastwood , very good )
And i have 2 of the devilbiss sv1 .
One for paint , one for clear .
I have been doing this for 16plus years .
You can use one gun for all make sure you clean it very well before and after each application
Thanks for another spray gun review. I got a black DV-1 demo gun a while back, but never even used it. I dunno, TE-10 in one prolite, TE-20 on another with 1.3's... and I leave another 1.4 TE10 prolite on the side for 2k direct gloss. Don't know if I'll ever change. The Sri pro lite treats me well too.
Always click the button to watch your new videos so fast!! Good stuff man!
Thank you for the review gunman as always keep up the great work you do
Thanks for your reviews. Love the content and honesty.
So, time for a new top 8? Or could you just slot this one in? These minis are getting very versatile!
Minis are minis, they all work in a pinch
Awesome review couldn't ask for more
Thanks for all the reviews..you should review the new iwata kiwami 4
Just got mine, love the spray gun
Best mini gun easily
Can you help me with what is the pps adapter o need for that gun?????
Been waiting for this one
These days the way I see it, if you are capable of doing the work yourself, buy the best quality tools, even if you may not really want to pay for them. As long as it won't cause you real hardship. You'll get the best result possible, they'll usually pay for themselves after only one job [maybe not SnapOn :)] and will most likely last more than your lifetime if cared for properly. For spray guns the difference [other than SATA] is only a few hundred dollars anyway
Anyone know what the part number for the stupid cup pps 2?
How much material does this use compared to sata minijet 4400b
Hi Gunny! First, i want to thank you for the best free videos, that you can get from internet, absolutely! I have follow you for years, and in some comment i did thank you for leaded me in the best hobby ever! I have learned to spray. well, moderately "well". Lol. I have watch your videos so many times, and been listen what you had to say.. One thing getting in my mind, when you post "Top ten" or those compare videos, if you put those guns side by side, and think what price/ value they have, could you tell, which guns are best, no matter what price they have..? Just mention..? For examble "Top 8 mini guns", Sata 4400, obviously is better gun than winner, ANI r150.. I hope you can reed my English, lol..!
I know what you mean. I could redo the lists but taking price out of the picture
How are you able get to spray at 50 psi I've tried spraying clear with it at 35 psi and tue fan start breaking up in the middle i have the s1 air cap
I think it’s a lovely little mini gun, the s1 cap was my cap of choice, good size fan as well, probably one of the most comfortable sprayguns I have held in my hand ✋🏻, it is quite expensive I will add , almost a few bucks away from a Dv1 base on eBay. But comparing this gun to an Sri I prefer the Dv1s. Sri just feels too heavy in comparison and not quite as comfortable. Either way appreciate your opinion cheers 🍻
You did a few awesome videos on this gun! I'm gonna add it to my collection when the times right.
Good and smart......good jobs guys
Selalu mengikuti berita dan videomu bos, selalu menginspirasiku👍👍👍💯
Ask me a question please, which pistol do you recommend for polyester base, iwata w400 bellaria or devilbiss gti pro lite both 1.3 ?
Hi Gunny! Thank you for very good video! I would like to see you paint some a little bigger, with this DV1S.. Would you please..? ☺👍
Sure thing. I'll keep that in mind
Dear Sir, which adapter & cup were you using with this DV1-S??? Thank you for your time 💯👍👍
S14 PPS2 adapter
This looks like a direct competitor to the iwata lph80. Thoughts?
Hello Gunman. What your gun setup for PPG waterbase? pressure, fluid...
What's the dekups adapter number for this.
DV 1 is 1st . How much is it?
Sweet gun gunny
Considering the price it's not odd that people wait for a Chinese knock-off. They just ask way too much for this one.
hi Gunman and every one, may I know how many spray guns you have? i wondering that you have many !
and do you ever try airless system to spray cars?
Hi Gunny! Which one you think is better for someone who does not have big air compressors? I only have 2hp with 88ltrs of tank. My air compressor can sustain the SRi prolite. Do you think my air compressor can handle this hvlp dv1s? What is your opinion in regards to spraying clears, sri vs dv1s? does the difference huge?
What do you think of this for painting fenders/bumpers/hoods off the car ?
Too small
If this was a sata you would have killed it for the price point
Not a sata fan btw could you compare this to the 4400 there similar but sata is slightly cheaper
Sata 4400b is about 40e more expensive than DV1S in europe.
@@rikujkoivisto in the UK it's £100 less
Full size for me nice video 👍
this should be a spot repair review.
Hi I need a respray for my hq Ute where’s your shop
Hallo Gunny ! Nice Video 👌🏻👌🏻👌🏻Can you tell me how much pressure did you use ? in BAR please😄 thanks Gunny ✌️
How are you liking the envirobase
It's all good. I'll be doing some more vids on it soon
have you ever used the Iwata LPH-101 hvlp? If so how would you compare this to it?
lph101 is a true small gun , very good for mirror caps , tow hook covers and gas tank covers .
this beast is a more of a midi gun .
can literally do EVERYTHING.
one of the best features of this gun compared to other mini/midi guns is the air consumption.
you don't need a huge air compressor with this gun.
Hi I love watching your videos! Just need some advice mate,I'm relatively new to spraying and bought a devillbiss gti hd gun recently, it says 12 bar on handle of gun,does that mean I have to use 12 bar compressor or is it just to say that 12 bar is the maximum compressor I can use with gun,currently I'm using a 50 ltr, 8 bar compressor, any advice much appreciated mate
Thanks
Which one is better for clear coat s1 plus or the S2 ?
S1
it's a beautiful gun. I think holding a gorgeous gun makes a big difference but that's just me
can i use my 30 gallon compressor with this gun?
@@suspensefulness that should have no issues at all running this gun all day without air fluctuations
@TheGunmanChannel thanx for replying and reviewing this spray gun
Is this Dv1S more geared towards Basecoats or clearcoats?
it will do both and very well
Hell yea brother 🤘
Hey gunny, what pps 2.0 adapter does this gun take?
S14
@@TheGunmanChannel thank you sir, mine arrives on Tuesday, excited to spray with it. Keep up the good work gunny, thanks again!
looks nice.
What pps adapter dose it take I can't find one
S14 PPS2 adaptor
@@TheGunmanChannel thanx
Love your videos Keep smashing out amazing work
out of my price range but a nice lil gun by the looks of it
Anyone know which pps 2.0 adapter this gun takes?
S14
@@TheGunmanChannel Thank you, I couldn't find it anywhere
Los mismos con las mismas, de
Muchos años atrás que cada día nos axficia
@Gunman what PPS 2.0 part # for this Dv1-s
S14 PPS2 adaptor
@@TheGunmanChannel Thank you so much, nobody around here knows, even online.
@@SundownBlazer tell me about it lol. Even my 3M rep couldn't find it, I had to ask my Instagram audience, someone there knew.
@@TheGunmanChannel That's nuts
What psi does it use.
I generally run it at 29psi, but the volume it uses of more important if you have a small compressor. Check the CFM or LPM on DeVilbiss website, then cross-reference with your compressor to see if your compressor will run it.
I think devilbiss finally learned that rubber and plastic air distribution rings or any gun parts are NOT a way to go as every part of this gun is solid .
no cheap plastic that kept breaking on me on my older devilbiss and all satas .
Super
The smart spraygun
Vs sata jet 5500 1.2
I hate my 5500 rp.
your filming looks blurred is it clear coated over spay I use isopropyl alcohol USP 99% from the drug store to clean my safety prescription safety glasses it does not damage them at all, try that on your lenses you will be imprest, I'm a painter
Looks fine to me,might be your screen needs some alcohol wipes
@@andybussa1323 maybe my eyes lol
Give away spraygun sir..😂
Hellouuu
Where's your catch phrase..." Paint some shit"......
😍😍😍😍👌👌👌👌👌👌👌👍👍👍👍👍👍👍💪💪💪💪
Too expensive.
Bad review. Call it out like you do for Sata. Overpriced. Not even using it for what it's meant for.
Shut up fanboy.
Awesome 👏 video gunny and thanks 🙏 for the review the price is high for a mini gun but what you getting for the money I will buy it gunny straight up just the fan size will make anyone buy it that’s the biggest fan I’ve ever seen on a mini gun hands down much love gunny 👏👏👏👏🙏🙏🙏👍👍👍👍👍👍👍👌👌👌👌👌👌👊👊👊👊👊👊✊✊✊✊✊💪💪💪💪🤙🤙🤙💯💯💯💯💯💯💯