Someone else has already commented but that hovering mower is a copy of an electric mower originally sold in Australia under the brand name Flymo about 50 years ago, and is still being sold today! As always another great video Stanley. 👍
I load a truck that is equipped with the mulch mate at work once in a while. I think my favorite feature is how it spills stone out on to the road for fellow unsuspecting motorists.
@El_Muffy Mulch Mate has 2 separate systems. One pulls the material out of the truck and places the material onto the cross conveyer belt in the belly of the Mulch Mate and dispenses the material from there.
All right, that’s pretty cool amazing products. The innovation of Americans in this country is absolutely mind blowing that tool used to pull trees out of the ground. That is bad ass. That really is.
The weed wrench has been around for decades for those who are unaware but that's the first one I have seen that will hold the jaws open which is definitely a major benefit and for anyone curious about their effectiveness I have many hours pulling Scotch broom with one and if you can get the jaws around it and have enough weight behind you it will certainly pull it. One note of your planning to use it in ground that is somewhat soft like top soil that isn't hard packed or sand etc and you're pulling a tough bush you may need to add additional surface area to the foot base or it can push into the ground rather than pulling the bush or weed up the base goes down. Great vid! Thanks!
I like the commercial mower snow plow and at a starting cost of $1,200, it is very affordable, unlike most of the commercial equipment available today. I have a Ferris SD36 walk behind mower that I've already adapted a sprayer and spreader to mount on the front of the mower and this snow plow may find it's way onto my Ferris too.
"You can mow and weedeat at the same time! It can be installed in 30 minutes!" 45 minutes later: "We are gathered here today to remember the life of Fluffy."
I setup a dump trailer w a cage and a Billy goat years back. Worked great but still had to tow the ventrac or zero turns separate. Thats why I’ll be looking into those mulch mate dmt’s.
@Stanley "Dirt Monkey" Genadek 11:33 got to give you a shout-out Stan, b/c saw these on your vid last year and than at trade show and picked 1 of the Plus 4.5 blades up. ABSOLUTE love it, and use this for tile, concrete, plumbing (CPVC, PVC, Copper, unistrut, etc…) emt conduit and so many uses for it. Now, right now the Calidad brand is getting hyped up for similar product and have that as well, and use it too….but I grab this (as lives on my Metabo grinder permanently) 9/10 for work I’m doing b/c so versatile and want to thank you again b/c never would have stopped if didn’t see your vid! I also know if this brakes….i do the most easiest warranty return ever, and new one shows up. Great people. Cheers✌🏻
Use the mulch mule with the walking floor and Billy goat for debris removal. But again, still have to take 2 trucks to allow the mowers to be there too. The dmt looks like a decent solution.
Yanmar builds a lot of the engines and hydraulic systems used in John Deere systems. So it's the classic Japanese made high quality and reliable engines. Yanmar and Kubota are pretty much neck and neck competitors outside the United States. They have been slower to capture their own US sales, but they are quality machines.
I was excited by their durability until I saw the prices. $150-$220 USD is steep. No wonder they have a lifetime warranty. Really, they only make sense for a professional who goes through dozens of regular discs yearly.
@@brucedale4465 not really, they last a long ass time and u don't got to worry so much about shattering its safety and replacement thing u can buy multiple and when a few are down u send those in and now u have a few backups that will last. it's a long-term investment really.
A lot of ideas for a problems that don’t even exist…. Some time saving but when you figure the cost and maintenance cost and replacement cost they will never amount to the extra couple minutes it saves me on the job
Yanmar?? Sounds different like they produce old school good stuff 😁 Worked for finnin "CAT" & understand. Those named companies are in for the dough, & pumped for this company from the user aspect. 👍
@12:03 I mean how does that work with giving out new discs on warranty like that? To me it don't seem like a profitable business model since you only sell one disc to each person.
@@mulchmate I'm in the NE where the snow is always a super heavy wintry mix. You must be in an area where you get a light powder. You aint doing no 8" of our snow with that thing.
Wrong that jeep is not the most powerful the next generation grand Cherokee I have is a 05 grand Cherokee with the 5.7 hemi 4x4 which has more power then the 5.9
Someone else has already commented but that hovering mower is a copy of an electric mower originally sold in Australia under the brand name Flymo about 50 years ago, and is still being sold today! As always another great video Stanley. 👍
Same in Europe.
That hovering mower is pretty much a copy of an antique mower that existed around 60 or 70 years ago. Interesting show. Have a great day.
Flymo, invented in 1964, although it seems it was introduced to US market in late 70's or early 80's as I recall. Flymo's are still produced.
I remember them in Australia and the same time
I still have one I picked up free with a worn bearing, interesting gadget that never really took off, pardon the pun.
I bought a copy about 5 years ago.. Works best on good smooth lawns. It is a plug in electric unit
Hit rocks & game over
I load a truck that is equipped with the mulch mate at work once in a while. I think my favorite feature is how it spills stone out on to the road for fellow unsuspecting motorists.
Did you install the seal kit or upgrade to the new zipper chute?
How do you feed the conveyor belt once it has unloaded whats on it? I mean how you push the remaining cargo out of the trailer onto the conveyor belt?
@El_Muffy all the material should start off on top of the belt so it all van be pulled into and through the Mulch Mate
@@mulchmate thanks, but if the material does not fall onto the conveyor , how do you put it on the conveyor?
@El_Muffy Mulch Mate has 2 separate systems. One pulls the material out of the truck and places the material onto the cross conveyer belt in the belly of the Mulch Mate and dispenses the material from there.
All right, that’s pretty cool amazing products. The innovation of Americans in this country is absolutely mind blowing that tool used to pull trees out of the ground. That is bad ass. That really is.
The weed wrench has been around for decades for those who are unaware but that's the first one I have seen that will hold the jaws open which is definitely a major benefit and for anyone curious about their effectiveness I have many hours pulling Scotch broom with one and if you can get the jaws around it and have enough weight behind you it will certainly pull it. One note of your planning to use it in ground that is somewhat soft like top soil that isn't hard packed or sand etc and you're pulling a tough bush you may need to add additional surface area to the foot base or it can push into the ground rather than pulling the bush or weed up the base goes down. Great vid! Thanks!
I like the commercial mower snow plow and at a starting cost of $1,200, it is very affordable, unlike most of the commercial equipment available today. I have a Ferris SD36 walk behind mower that I've already adapted a sprayer and spreader to mount on the front of the mower and this snow plow may find it's way onto my Ferris too.
"You can mow and weedeat at the same time! It can be installed in 30 minutes!"
45 minutes later: "We are gathered here today to remember the life of Fluffy."
I setup a dump trailer w a cage and a Billy goat years back. Worked great but still had to tow the ventrac or zero turns separate. Thats why I’ll be looking into those mulch mate dmt’s.
Man.. I really like that half dump front load mulchmate trailer...
So cool to see all the new stuff! I really wanted to come this year, but I couldn't get away.
🎉🎉🎉
the quick cut to the guy on the snow mate plowing into the pile of dirt had me cracking up.
@@xbxhunter 🤣🤣🤣🤘🏼
@Stanley "Dirt Monkey" Genadek
11:33 got to give you a shout-out Stan, b/c saw these on your vid last year and than at trade show and picked 1 of the Plus 4.5 blades up. ABSOLUTE love it, and use this for tile, concrete, plumbing (CPVC, PVC, Copper, unistrut, etc…) emt conduit and so many uses for it. Now, right now the Calidad brand is getting hyped up for similar product and have that as well, and use it too….but I grab this (as lives on my Metabo grinder permanently) 9/10 for work I’m doing b/c so versatile and want to thank you again b/c never would have stopped if didn’t see your vid! I also know if this brakes….i do the most easiest warranty return ever, and new one shows up. Great people.
Cheers✌🏻
Use the mulch mule with the walking floor and Billy goat for debris removal. But again, still have to take 2 trucks to allow the mowers to be there too. The dmt looks like a decent solution.
@@landscapingspecialist Thank you Thank you
Great show keep up the great work
🎉🎉🎉
Gonna get the Millner discs for sure
Yanmar builds a lot of the engines and hydraulic systems used in John Deere systems. So it's the classic Japanese made high quality and reliable engines. Yanmar and Kubota are pretty much neck and neck competitors outside the United States. They have been slower to capture their own US sales, but they are quality machines.
Them cutting wheels lookin like I need to spend some $$ 😂
$190 not cheap
❤❤❤Interesting inventions👍👍👍👍👍👍
That grinder wheel is $180. I would have to do some serious grinding/cutting to spend that much.
Worth it
A couple of boxes of 1mm cutting discs would be nearly that here in Australia, and we chewed through heaps of them at my previous job.
Very good thanks
❤
❤😊
Gotta be 20 different companies selling those indestructible grinding discs
Don't use them inside or where they're isn't at least a little breeze because the dust off them is crazy.
I was excited by their durability until I saw the prices. $150-$220 USD is steep. No wonder they have a lifetime warranty. Really, they only make sense for a professional who goes through dozens of regular discs yearly.
Yea mad dogs tools has the exact same and doing the exact same demo with the wheel disc haha
About the dump track, once the conveyor has unloaded the backside of the trailer, how do You push the other load back in order to feed the conveyor?
I would like to see a snow blower attachment for the mini excavator.
That Milner grinding wheel is $180! I can buy a lot of grinding wheels for that.
Millner discs...Fire
here to help
That last digger needs to be painted minion yellow & blue!!
Wicked awesome
❤😊
MULCH MATE!
Superb informative video.
Just bought the Millnertools disc. That thing looks dope! $190.
Really, it’s just for the people that have a lot of money!
@@brucedale4465- cause that comment makes heaps of sense mate!
Just use a little of your brain power and do the math on why your comment makes 0 sense. Thats excluding the other benefits. @brucedale4465
@@brucedale4465 not really, they last a long ass time and u don't got to worry so much about shattering its safety and replacement thing u can buy multiple and when a few are down u send those in and now u have a few backups that will last. it's a long-term investment really.
If your grinding wheel salesmen isn't missing part of his finger tip, is he really a grinding wheel salesmen? lol looks dope
2:00 Who wants to inhale exhaust when it’s in your face
@ 17:12 I need this to suck out all the old loose insulation in my attic.
A lot of ideas for a problems that don’t even exist…. Some time saving but when you figure the cost and maintenance cost and replacement cost they will never amount to the extra couple minutes it saves me on the job
Lawnmower has been around for 50 years. I flew one at a fair.
Talk about scouting for a freebie! How are the water lilies coming on?
I hope he considers selling t-shirts with the Dirt Monkey logo for fans of his channel 🙂
Foot steer seems for me, I have nerve damage on my arms and legs.
What is the advantage of that hovering lawnmower?
The hovering mower is just a remake of one from the late 50s!
Yanmar?? Sounds different like they produce old school good stuff 😁
Worked for finnin "CAT" & understand. Those named companies are in for the dough, & pumped for this company from the user aspect. 👍
great product me dirt monkey thank you
❤😊
In my experience, If it sounds too good to be true it usually is.
Putting a skid steer so close to the front with the wheels in the back seems like a bad idea
10:46 thanks for all that silica dust, this guy is ignoring the hazards or doesn’t care.
That dmt 105 is tits outta 10 Stan! 🙌🏻
❤😂
A much mule attachment for the dump? 🤔Hmmmm
2:07 😍
@12:03 I mean how does that work with giving out new discs on warranty like that?
To me it don't seem like a profitable business model since you only sell one disc to each person.
what if i told you they were $190 per disk...
That belt driven bed trailer is 40 grand.... they've heard about tipping trailers right?
There is no way you are plowing any more that 2 or 3 inches with that snow mate on a 2wd mower. Not gonna happen.
We do it all the time when it snows. 8" is about the max
@@mulchmate I'm in the NE where the snow is always a super heavy wintry mix. You must be in an area where you get a light powder. You aint doing no 8" of our snow with that thing.
Hey 👋
Should've asked Lee Ann Womack to sing you a song.
Foot pedals won't work on my zero turn, it has no transmission, just hydros!!!
Looks like PaPa James Hetfield...😂
10:18 Does this guy drink lacquer?
2:16 I see lots of crashes. Multi-tasking at that level will be a disaster for most knuckleheads.
Its a comic-con but for dads
I’d walk away if the seller comes out with “ commercially made “ if you’re selling it then how else would it be made.
That mower is not new, it is like the old FLOW-MO.
What’s up with your leg?
The angle grinder blade is the only thing interesting but its cost seemed to be deliberately avoided.
Sale sale sale the usa way lots of new gadgets
Wrong that jeep is not the most powerful the next generation grand Cherokee I have is a 05 grand Cherokee with the 5.7 hemi 4x4 which has more power then the 5.9
Can lawnmower girl mow with her feet behind her head?🚜
Those folks do know they've had tpost pullers for ever right?