@@mrzirak792 actually that was only an addition for the recent remakes of battletrap and whatshisface. in g1 it was just two veachles that become one robot
Gotta say this is one of your best creations. There's an almost chibi quality to the vehicles where the forms are simplified without sacrificing the defining characteristics. With the car composing the bulk of the robot body, I wasn't sure how the jet wouldn't just end up as kibble but the way you did it is perfect, having the jet fold over the torso like an apron. And with fewer stud-based hinges this robot looks much less fragile than some of your earlier models. Great work!
Man, I have wanted a more simplistic design for both Shatter and Dropkick since the movie came out. Who knew just what I was looking for would be made of LEGO. I am thoroughly impressed.
I'm surprised you didn't mention how the wings of her jet mode are different between her movie model and the G1 Duocon design. Here, they're mounted flat against her back like a Seeker, making her silhouette appear larger, while on the original movie design, they're mounted perpendicular to the engine intakes, draping over her shoulders like a cape. That's one big difference I noticed in the design compared to the original, not the harrier jet cockpit on her chest, which I just assumed was an unavoidable byproduct of the Duocon design process.
I know I say this a lot, but I think this one is your best yet. Seriously, your builds have only ever improved, and these G1 characters especially have been great.
btw for the red part in the harrier: i tried to figure out ehat type of harrier it was and i believe it was either a av8b+ or most likely a sea harrier (frs1), if it was the sea harrier then that would be more realistic since there was ussually red paint on the top part of the aircraft outlining a square. Also for the landing gear, it is a good depection of the harriers unique exaust allowing it to perform v/stol landings.
It never ceases to amaze me how you can engineer Masterpiece- or even 3rd-Party-level complexity into such a small scale and still maintain structural integrity, AND grant them almost full action figure posability on top of it. Dropkick and Shatter as Duocons somehow feels better than them being Triple-Changers, especially considering the drastic size difference of their Alt-Modes. You can suspend disbelief, somewhat, with Astrotrain, Blitzwing, Octane, Broadside, and even the jet/helicopter figure that wasn't imported for the franchise with how they're shaped and how one Alt-Mode folds or unfolds into the other with relative ease and somewhat similar shaping. You don't get that same strange congruity between muscle cars and a jet or helicopter any more than you did with Sandstorm's, Springer's, or Movie Drift's Alt-Modes. Yes, they LOOK cool, but they don't fit together as a singular entity. These are far superior to what our HasTak overlords have given us for these two so far.
Hasbro should've done this for Studio Series. Instead of giving a deluxe for each vehicle and having two figures that were fairly inaccurate because each figure was missing the kibble of the other vehicle or relying too heavily on the figure's alt mode's parts, they could've gone the duocon route and sold both vehicles in a pack that would combine to make a more accurate robot mode.
i'm really surprised at how the jet flays apart into 3 segments, and also the way you handled the duocon element on dropkick and shatter, as i was expecting something like siege flywheels.
I like the Duocon idea of it, but what would happen if it was a straight up triple changer, made in Lego? That would be most impressive. I do like the designs of both vehicles and the combined robot though.
Can you use Lego to build two robots that can transform into a police car and a fire truck respectively, and then combine them up and down to form one big robot?
These g1 designs are good but I really want some more movie stuff than the larger scale g1 stuff.it’s just my opinion you can do whatever y oh want but I prefer movie designs like the rest of the terror cons
That robot mode looks slick as hell. And don't ask me why, but the little antenna made me think a Lego headmaster was possible. Have you considered it?
@@studentscissors please make a future build tutorial video for how to build a brick built and articulated lego Big Fig version of my favorite heffallumps and woozles based character named Wooster The Giant Woozle from my favorite episode of The New Adventures Of Winnie The Pooh Season 1 Episode 7 titled The Great Honey Pot Robbery please
i really enjoy your idea to reinterpret these triple changers as duocons
But dont duocons' parts have robot modes? These are... Bi-formers? Dosbots?
@@mrzirak792 actually that was only an addition for the recent remakes of battletrap and whatshisface. in g1 it was just two veachles that become one robot
@@caittastic damn i forgor💀
@@caittasticThis is still the case for Skytread (formerly Flywheels). The vehicle modes don't have their own robot modes.
Gotta say this is one of your best creations. There's an almost chibi quality to the vehicles where the forms are simplified without sacrificing the defining characteristics. With the car composing the bulk of the robot body, I wasn't sure how the jet wouldn't just end up as kibble but the way you did it is perfect, having the jet fold over the torso like an apron. And with fewer stud-based hinges this robot looks much less fragile than some of your earlier models. Great work!
I'm really loving how both the separate vehicles combine to make the robot mode
Shatter and dropkick being Duocons is genius
I wasn’t sure how this would work but it fits so well with your Dropkick design. These are no doubt a pinnacle in your Lego career!!!
Man, I have wanted a more simplistic design for both Shatter and Dropkick since the movie came out.
Who knew just what I was looking for would be made of LEGO.
I am thoroughly impressed.
God this looks amazing! Keep it up!
Shatter looks awesome as jet mode and robot mode
I'm surprised you didn't mention how the wings of her jet mode are different between her movie model and the G1 Duocon design.
Here, they're mounted flat against her back like a Seeker, making her silhouette appear larger, while on the original movie design, they're mounted perpendicular to the engine intakes, draping over her shoulders like a cape.
That's one big difference I noticed in the design compared to the original, not the harrier jet cockpit on her chest, which I just assumed was an unavoidable byproduct of the Duocon design process.
The glamour shots are really great!! Love seeing all the cool poses Shatter (and friends) can have.
I know I say this a lot, but I think this one is your best yet. Seriously, your builds have only ever improved, and these G1 characters especially have been great.
Some of your best work yet!! Such a slick build❤
Looks great mate, keep it up!!
btw for the red part in the harrier:
i tried to figure out ehat type of harrier it was and i believe it was either a av8b+ or most likely a sea harrier (frs1), if it was the sea harrier then that would be more realistic since there was ussually red paint on the top part of the aircraft outlining a square. Also for the landing gear, it is a good depection of the harriers unique exaust allowing it to perform v/stol landings.
I love this. Very sleek.
It never ceases to amaze me how you can engineer Masterpiece- or even 3rd-Party-level complexity into such a small scale and still maintain structural integrity, AND grant them almost full action figure posability on top of it.
Dropkick and Shatter as Duocons somehow feels better than them being Triple-Changers, especially considering the drastic size difference of their Alt-Modes. You can suspend disbelief, somewhat, with Astrotrain, Blitzwing, Octane, Broadside, and even the jet/helicopter figure that wasn't imported for the franchise with how they're shaped and how one Alt-Mode folds or unfolds into the other with relative ease and somewhat similar shaping. You don't get that same strange congruity between muscle cars and a jet or helicopter any more than you did with Sandstorm's, Springer's, or Movie Drift's Alt-Modes. Yes, they LOOK cool, but they don't fit together as a singular entity.
These are far superior to what our HasTak overlords have given us for these two so far.
Agreed these cashgrabs can’t win against transformers that the fig was actually designed with effort
you sir are easily my favorite system brick transformer builder
I hope that hes still making mini transformers
Give him some time
This series might take a while for all this stuff to end, probabaly start of next year we’ll get back to the good little guys
Shatter and Dropkick look awesome together as Duo-Cons.
I REALLY love this build.good job STSC
Another incredible design
My favorite one you have ever made. Ceep up the good work.
Once again, another work of art that I have waited an eternity for!
SHATTER OMG
This guy is just brilliant
the harrier is one of my favourite aircraft ever, also the robot mode looks incredibly cool
tbh the robot mode almost reminds me of a shark in some aspects, the wings being grey look kinda like fins
really nice stuff
Hasbro should've done this for Studio Series. Instead of giving a deluxe for each vehicle and having two figures that were fairly inaccurate because each figure was missing the kibble of the other vehicle or relying too heavily on the figure's alt mode's parts, they could've gone the duocon route and sold both vehicles in a pack that would combine to make a more accurate robot mode.
i'm really surprised at how the jet flays apart into 3 segments, and also the way you handled the duocon element on dropkick and shatter, as i was expecting something like siege flywheels.
I first looked at thumnbnail at i thought it was Cliffjumper from TFP for a second
Pretty cool! makes me wish I made a video of my duocon shatter all that time ago lol :)
I think having her head a tiny bit visible is accurate because I think she had some red on her jet mode anyway so it’s not all bad
I really love how you can see the cockpit and the headlights on the chest👍
Imma be honest that’s a smart way to g1-ify a bayverse triple changer by turning them into a g1 duocon. Remember me from the Lego devastator?
Great work😂😂😂🎉🎉🎉❤❤❤
This is sick!
shes got "headlights" rawrr...
Mannnn thats a robot😭😭
what a masterpiece 🤩😍
Letss goo
All I can say is this is cool 😎
I like the Duocon idea of it, but what would happen if it was a straight up triple changer, made in Lego? That would be most impressive. I do like the designs of both vehicles and the combined robot though.
Gorgeous!!!
I love this so much!!
This is amazing. Could you please make mini transformers like some of Synthetic Mason's tiny transformers? If not, that would be cool too.
Great idea making it a Duocon Instead of Attempting to shove A car, Robot And vtol into a single form
You should make a video on all your favourite transformers you have made so others can make them for themselves
Can you use Lego to build two robots that can transform into a police car and a fire truck respectively, and then combine them up and down to form one big robot?
Brilliant
id love to see you make blitzwing :)
Plssssssssssssssssss build a volcanicus. Ps:love your vids and I'm subscribed to your patreon. But anyway keep up the good work, great vids btw!
I don't think I see Angela Bassett here.
It's sad that you can't submit this to Lego Ideas
This is so good I had to make it
Can you make a triple changer that transforms into a jet and a car
Can you maybe do tutorials for more of the transformers
Woooooo! Les goooo
Now Bumblebee or optimus
Could you do skids and mudflap icecream truck version
Can you do balettrap please?
These g1 designs are good but I really want some more movie stuff than the larger scale g1 stuff.it’s just my opinion you can do whatever y oh want but I prefer movie designs like the rest of the terror cons
Ese mismo transformers pero en mini 😅😂
I love it
Can u build lego transformers speaker titan men
Hell ye
That robot mode looks slick as hell.
And don't ask me why, but the little antenna made me think a Lego headmaster was possible.
Have you considered it?
I love her
Make blitzwing next
Now please
Make it Blitzwing from bumblebee movie
Or the g1 version plis
Do a volcanicus combiner please
If you see this can you please make a g1 bumblebee.
Go instruction
make tutorial of optimus primal please?
Yeeeeeeeeeeeeeeeessss!
Please instruction
Tutorial bro pls
Nvm you already did it lmao
I'll sub from two accounts if you show tutorial for lego transformers #34 :optimus prime (power master) pleaseeeee PLSSSSS
Can I have sentinel prime
Привет из России
Привет
@@Leonidas-s1b ты из России или пользовался переводчиком?
Из России (Казань)
Could you make a Drift/ Deadlock triple changer become duo-con
Could u tell me the discord server pls?
what discord server?
@@studentscissors please make a future build tutorial video for how to build a brick built and articulated lego Big Fig version of my favorite heffallumps and woozles based character named Wooster The Giant Woozle from my favorite episode of The New Adventures Of Winnie The Pooh Season 1 Episode 7 titled The Great Honey Pot Robbery please