Thanks for this video. Just finished making one, though I only used ~10 oz cotton duck and a non-industrial machine (Pfaff 130). Still turned out great, the rope in the hem makes a big difference.
That is great, I love hearing that! I have made bags with 10 oz canvas too, it works great for that and lasts too. My backdrop is made from 10 oz canvas, its good. Glad you like the rope, it definitely steps it up a notch. Thanks
Hi Alexander, Great video thanks for posting it. I made a couple of the tool bags in military grade heavy duty canvas manufactured here in Australia. The tool bags turned out 10 inches wide by 16 inches long. The height was 12 inches reducing to 10.5 after I added the bolt rope at the top. I shortened the outside strap by 3 inches to allow for the bolt rope. Using a 5/8 inch seam allowance the tops of the pockets on the end lined up with the the pocket tops on the side. The end pockets in the video banner image are lower than the side pockets, I guess this was a prototype version of the bag. I was pretty much forced to sew the bottom corners using a triple feed 2 inch cylinder arm machine to achieve good tight seams on the bottom corners of the bag. The rest of the bag was done easily on a flatbed triple feed machine, like your Juki 1508. Not sure how one would go making this bag on a plain drop feed machine with thick canvas. I agree that everyone should have a Juki 1508 triple feed. Thanks Again Myles
That is a very informative comment. I gave it a thumbs up. Your project sounds great, you have made a great tool bag and who knows, you may have it for the rest of your life. Those bottom corners are definitely tricky. Again, I really appreciate you taking the time. Oh and prototype, yes, most of the things I make are. \HaHa/
The Juki 1508 is a great machine. I also have a 1541 which look very similar. I am planning on doing a video soon about the differences between the two. Stay tuned and thanks for your comments.
I'd love to make a bag like this but with the pockets inside and with some sort of closure for security reasons. Thanks for showing me how it could be done
I especially adore and appreciate the crap out of this video! Thank you so very much! And this machine you using is officially my dream machine. The juki you did all the sewing on. Im in awe.
I absolutely love how you just chuck your cut pieces right next to your machine, like you're saying there all done no sweat peanuts 😂. I'm seriously thinking about investing in a Juki myself.
cool bag and I loved your video. No annoying music or talking just practical demo :) I've been sewing for a living for 45 yrs and I learnt several new ways of doing things.
I just finished this bag. I used 2 or so yards of 36” wide duck with some left over. I added inside pockets using the method in the video with the larger bag with leather handles. It went together fairly easy. I did make one modification to both end panel pockets(at least from what I saw in the video) by moving the pockets panel up higher with just enough of the bottom seam allowance to be sewn under the end sacrifice panel . I did slightly off set the tops of the end pockets with side pockets. You end up with quite a few layers to go through during the final assembly! Regarding the cut list provided: I would cut the inside straps an extra 6 inches longer or so to be sure the doubled up section of the handles can be sewn to the bag. I ended up having shorten the outside handles a bit from the ends to get them to attach properly. It carries well enough with the handles a few inches shorter. Awesome project. Great videos.
really nice craftsmanship! I started doing leather work this year, but it is very expensive. Looking into canvas with leather like a Klein bag. You just broadened my horizon with this. Awesome work!
You have great instructions, i slowed it down and was able to get the instructions and sewed together 5 of those canvas tool bags, they are easy once you do the first one but you need a industrial sewing machine to sew it together, thanks for the nice video and it was a great project.
Wow, you have got an eye for watches, Nice! Oh and comparing my video to a Jimmy Diresta is probably the most generous compliment you could give me, not that I deserve it. 😌 Thank you.
Good gosh, Alex, your machine, being that it's an industrial piece of machinery is phenomenal. For it to be able to get over the bulky areas as it does is awesome! I have a Husqvarna Viking and, although I've tried getting over some bulk areas when I sew, if I don't go slow, which I would normally do, sometimes the motor can't even handle it and it causes my needle to break. Nevertheless, this was a great showing of how you put this bag together and I loved especially the pockets technique. I'm going to try my hand at incorporating that particular feature into a tote bag made with 100% cotton. Thank you so much for sharing.
Yes the machine is cool. These industrial machine allow me to sew things in unorthodox ways. I enjoy that I can dream up something and then be able to do it, it's fun.
It's such a good design. The dimensions are perfectly practical for a tool bag. Bigger than a lineman's bag, but smaller than a regular tool bag (or so it seems)... I keep watching this video. Where is your shop located in US? M
Hi nice job, i see you went straight for the serger to tame that canvas, sure does get unruly quickly doesn't it. Surprised your serger table is just short of meeting up with the outfield table to be flush. I hear ya about people not wanting to pay the price. SEWING takes FOREVER and an 8oz spool of goretex is damn near $120 ! People don't realize that its not just thread. Let alone some material can be $20-30/yard. I make custom LED lights to specifically fit under the harp. Id be happy to send one along. I have one on my Juki 5550 and another on the Tacsew.
I used the overlock on the quilted pieces of my back pack. You can see that overlock machine sits @ 6" above the table. I have found it to be very handy to use. It can be seen in my backpack video if your interested.
toobglued i tried looking at your bio to see where I can go to buy those LD’s.. but had no luck .. do u have a internet ship somewhere??!! Etsy? Insta? Help! LOL
I almost finished a bag like this today. Just have to prowl out in my garage and see if I have any rope. I had a painting drop cloth that I cut up for this. Thanks for posting this a couple of years ago.
I appreciate you not talking thank you very much. I just need to watch this video 100 more times and then I can do it. Whats the soup that was made to go with the fried polenta 😋
Damn it! Just as I was engrossed in this video, my wife came through the door unexpectedly. I had to insist that I had been trying to find a video of naked women, and that I had not actually searched for a sewing video. She thought it was hilarious. (Hope the joke doesn't offend anyone - that's what I really said to her). Thanks for a great video. I have recently been searching local tool shops for strong canvas tool bags. Have only found innovative but cheaply made alternatives so far. But if I leaned how to fix my wife's sewing machine...
Well...I've watched this video a couple of times and every time I try - in my head to make it more feminine but it's never the same as this one Alex makes. Awesome tote.
Sure, I have made bags with thinner, lighter material and they are great too. I would think any duck canvas would good for a bag. Heck, just go for it.
Such a great video and I hope I can follow after multiple times of learning and scrutinising (hope I use correct word). Thank you so much and hope to learn more. I am from Malaysia.
I want to ask how much a fat square (not solid) cost? Actually I am 62 yrs a pensioner and like quilting always learning from yr tutorials. ridzwan latiff is my son and I use his account. Last night I just finished my "Crossing Path" quilt and I' m so excited to sew more. Thank you for yr reply.
Am I seeing this right? When closing the bag up you basted the 3 edges and then did a final seam all the way around the gussets? It is a cool bag! Thx!!!
Excellent, would consider another bottom material, as the bright canvas will look ugly fast, especially on grass. Probably use a leather or a better waterproof pvc or nylon groundsheet, like for heavy tents.
That is one theory and some great ideas but I take issue with your opinion that it will look "ugly". I find the visual appearance and patterns of use to be interesting and often beautiful. Often things are desirable because they are rusty or have a patina. Have you noticed that most brand new jeans have replicated wear patterns? Try this video out of another bag I made with "dirt" as a feature. ruclips.net/video/2qHdHUqWGK0/видео.html
Alexander Dyer Ney, you cannot compare wear marks on jeans or leather with grass and dirt stains on pure white canvas. Check out the Totepack Nr. 2 from Fjällräven. Nice leather bottom. However, of course this remains taste and that is often hard to agree one. Otherwise really nice bag.
wow, that's amazing. it would take me months, but i'm just a beginner. i know enough to be able to follow along and understand what you're doing and why it's all in the order you worked in, but the skills you use to make it... might be a bit beyond me at this point. but i'm inspired!
Oh sure, I do custom work, but nobody has been willing to pay my high fees. ;) email me if you want. Just click the "About" tab on my channel for my address. Thanks a million.
A really nice bag, I like it, but could I make it after watching the video, even 10x, unlikely. Without ongoing commentary I have little to no clue why you were doing, what you were doing nor the reason for doing it the sequence presented. Really nice sewing and a good looking useful bag; you'll probably get many years of use from such a quality product. I think I'm envious.
I know it is fast, if I were to play everything at regular speed the videos would be much longer. It is a judgement call to be sure. If you are interested in making one I encourage you to just go back in the timeline a couple of times and I think you will get it. I have actually seen a couple of other folks make this bag based on nothing more than this video. Like this guy. ruclips.net/video/ZsOAF1ADgL0/видео.html Also check out this other video of mine where I make a similar bag and there is some voice over with a few more tips. ruclips.net/video/lz-dL1OKAfs/видео.html Juki 1508, it is in the description. I appreciate your comment.
Beautifully made! I'm just about to upgrade to a bigger machine, a Juki 1510N-7. Also looking to get an overlock machine to simplify/speed up hidden seams. Any recommendations on particular options/capabilities to look out for with an overlock machine? I'm usually sewing cordura, sometimes with padding or thin foam.
Thanks. Juki is a good way to go. I love my 1508. This overlock is built for heavy material like denim and canvas. A lucky find on my part. I does shirting well too but I don't know about padding.
Hi, thank you for the video. I am trying to make a garden tool tote for a friend as a gift. On the cutting instruction, there are : Main Sacrifice Panel (1) End Sacrifice Panel (2) and the Inside Strap - Where do they go on the bag construction? Thanks so much.
The Brother had smaller thread in it and at the time I thought it would be faster. In the end, a second machine is not necessary; The Juki 1508 is the real work horse here and would be capable of the entire job. Hope that answers your excellent question.
Alexander Dyer ooh you are so very kind to spend time to answer me!! Thank you very much sir. I am still a new learner of sewing i appreciate your kindness of sharing sewing knowledge here. 👍👍👍👍👍
For now I put some more explanation in the description. I have had a few questions on the handles so I wanted to put it where more people can see it. I have also included time cuts so that you can see me doing what I am explaining. I will have another bag video coming soon and I will be making the same kind of handles in that video so hopefully I will answer your question. Thanks.
Yep, Nice Job !!!! Cool, sorry I don't understand 100% English, but what i wanted to know, what was the fabric you used in the bag? it was cotton canvas and what was the weight? I'm in europe ok
Looks amazing!! You are very talented! Have you ever had to use a gelatine or starch on canvas to make it stiffer and not floppy? I would appreciate if you had any tips on that!
Thanks Sarah, the grommets are for anything that you may want to attach with a girth hitch. It is an old method. I don't starch my canvas, it is 15 oz. , it is stiff because it is thick.
Loved this video!!! Wife wants an industrial machine, now I think there is a reason to get it for her.......keep up the great work.
My favorite sewing video on RUclips. Excellent.
My favorite comment. Thank you.
I really enjoy your tutorials. Also all the sewing machines you have. Looking forward to your next project. Have a good week
AMAZING. What skills. I love that there are still folks that have these amazing craftsmanship. Thank you for sharing.
Agame el favor si esa es sizag
I'm glad you showed how to work those rivets!! Great bag!!
haha you make it look so easy. plain material + no fuss design + WORKMANSHIP = stunning piece!
Thanks Dani, I should have a new bag video out soon.
Great, I'll look forward to it!
Thanks for this video. Just finished making one, though I only used ~10 oz cotton duck and a non-industrial machine (Pfaff 130). Still turned out great, the rope in the hem makes a big difference.
That is great, I love hearing that! I have made bags with 10 oz canvas too, it works great for that and lasts too. My backdrop is made from 10 oz canvas, its good. Glad you like the rope, it definitely steps it up a notch. Thanks
Hi Alexander, Great video thanks for posting it. I made a couple of the tool bags in military grade heavy duty canvas manufactured here in Australia. The tool bags turned out 10 inches wide by 16 inches long. The height was 12 inches reducing to 10.5 after I added the bolt rope at the top. I shortened the outside strap by 3 inches to allow for the bolt rope. Using a 5/8 inch seam allowance the tops of the pockets on the end lined up with the the pocket tops on the side. The end pockets in the video banner image are lower than the side pockets, I guess this was a prototype version of the bag.
I was pretty much forced to sew the bottom corners using a triple feed 2 inch cylinder arm machine to achieve good tight seams on the bottom corners of the bag. The rest of the bag was done easily on a flatbed triple feed machine, like your Juki 1508. Not sure how one would go making this bag on a plain drop feed machine with thick canvas. I agree that everyone should have a Juki 1508 triple feed.
Thanks Again Myles
That is a very informative comment. I gave it a thumbs up. Your project sounds great, you have made a great tool bag and who knows, you may have it for the rest of your life. Those bottom corners are definitely tricky. Again, I really appreciate you taking the time. Oh and prototype, yes, most of the things I make are. \HaHa/
This is mesmerizing to watch. I want to sew like you do!! Until I do, I at least can use some of your techniques in my own work. Wow!!
Excellent project. love the clean design and the straightforward demonstration ... kudos!!
I appreciate that Dominic Del Principe.
The Juki 1508...the favorite in my arsenal of machines...I have 2 1508s one for a back-up....nice bag...
The Juki 1508 is a great machine. I also have a 1541 which look very similar. I am planning on doing a video soon about the differences between the two. Stay tuned and thanks for your comments.
This was so cool to watch! I also love your overlock machine
I'd love to make a bag like this but with the pockets inside and with some sort of closure for security reasons. Thanks for showing me how it could be done
LOVE, LOVE, LOVE, THIS BAG
THANK, THANK, THANK, YOU
I am absolutely floored and speechless. This is BEAUTIFULLY made!!! The craftsmanship is impeccable!!!
Thank you, you are too kind.
I especially adore and appreciate the crap out of this video! Thank you so very much! And this machine you using is officially my dream machine. The juki you did all the sewing on. Im in awe.
This is definitely a work horse of a machine. Machines come and go in my shop but this one stays, I love it.
I have never seen anyone sew like you. You have many unique techniques. Very good bags and videos. 👍
That is probably because I am self taught. Taught with the help of RUclips. It is a great time to be alive.
I absolutely love how you just chuck your cut pieces right next to your machine, like you're saying there all done no sweat peanuts 😂. I'm seriously thinking about investing in a Juki myself.
cool bag and I loved your video. No annoying music or talking just practical demo :) I've been sewing for a living for 45 yrs and I learnt several new ways of doing things.
Thanks. New ways of doing things huh? That is what happens when a carpenter gets a sewing machine. Ha Ha 😋 But seriously I appreciate your comments.
Love the old serger used in the video.
I made this for myself and my friends.... Everybody loves them. Thank you!
I just finished this bag. I used 2 or so yards of 36” wide duck with some left over. I added inside pockets using the method in the video with the larger bag with leather handles. It went together fairly easy. I did make one modification to both end panel pockets(at least from what I saw in the video) by moving the pockets panel up higher with just enough of the bottom seam allowance to be sewn under the end sacrifice panel . I did slightly off set the tops of the end pockets with side pockets. You end up with quite a few layers to go through during the final assembly! Regarding the cut list provided: I would cut the inside straps an extra 6 inches longer or so to be sure the doubled up section of the handles can be sewn to the bag. I ended up having shorten the outside handles a bit from the ends to get them to attach properly. It carries well enough with the handles a few inches shorter.
Awesome project. Great videos.
Amazing job, beautiful craftsmanship :)
Thank you for the nice words :)
really nice craftsmanship! I started doing leather work this year, but it is very expensive. Looking into canvas with leather like a Klein bag. You just broadened my horizon with this.
Awesome work!
What a nice thing to say. I like the Klein bucket bags too.
When I get my juki I’m gonna try this bag. I love it! I think I’ll make it for all of my mums knitting tools and wool.
Excellent, please share.
I want to make one for my dad! He definitely need this kind of tool bag! Great video Sir Alexander! Very useful tutorial! Thumbs up!!
Thanks! 😀
wow!!!!! what a great bag! I need a bag like that for my final year in uni for a sewing equipment!!!! thanks xx
sweet!!! I would love to see it.
Alexander Dyer I will let you know if I make one!
You have great instructions, i slowed it down and was able to get the instructions and sewed together 5 of those canvas tool bags, they are easy once you do the first one but you need a industrial sewing machine to sew it together, thanks for the nice video and it was a great project.
Wow, lots of work!
Wow!!! I really enjoyed watching this video! You did a great job!
thank you . I love your work .
Great job. Love the bag.
You did those rounded corner seams so effortlessly/flawlessly haha :D
Very nice craftsmanship and filming & editing skills, as well!
Thank you for the nice comment.
That’s beautifully orchestrated, thank you
Jimmy Diresta with a sewing machine and a Seiko Shogun. Great video, loved it.
Wow, you have got an eye for watches, Nice! Oh and comparing my video to a Jimmy Diresta is probably the most generous compliment you could give me, not that I deserve it. 😌 Thank you.
my goodness.... you are such a wonderful artist sir!!! great creation. thank you.
Just a man with his sewing machines. Humbly... Thank you.
Great Sir. I have also started learning how to make bags. Searching for a good industrial sewing machine. Let's see and all the best for your work
Did you see this one? ruclips.net/video/sBavkfataiM/видео.html
thanks for your kindness and generousity in sharing the how to to make the bag. also a very entertaining bag making effort.
Your Welcome, Thank You.
Love it. I almost felt hypnotized
Thank you.
Your sewinmachine Is wonderfull, and this bag is fabolous, great job men...
I like this sewing machine too. Thank you.
Wow Your bags are nice. Your Awesome Alex! Your one of my mentors now!😉😀 Thank You Soooo Much 🤗
I am glad you found me and I really appreciate all your wonderful comments and support.
Good gosh, Alex, your machine, being that it's an industrial piece of machinery is phenomenal. For it to be able to get over the bulky areas as it does is awesome! I have a Husqvarna Viking and, although I've tried getting over some bulk areas when I sew, if I don't go slow, which I would normally do, sometimes the motor can't even handle it and it causes my needle to break. Nevertheless, this was a great showing of how you put this bag together and I loved especially the pockets technique. I'm going to try my hand at incorporating that particular feature into a tote bag made with 100% cotton. Thank you so much for sharing.
Yes the machine is cool. These industrial machine allow me to sew things in unorthodox ways. I enjoy that I can dream up something and then be able to do it, it's fun.
I like the rope used for piping to strengthen the top ridge of your sack. I’ll have to do that next time.
It really adds a lot of constitution to the bag. Makes it stand open nicely.
THAT SURELY AINT NO HARBOR FREIGHT......Nice work.
Awsome, wow--- now that's a bag
This is an amazing work man.
Thank you for sharing this video it’s very nice and easy to make. The speedy fast fwd version is super.
Super Thanks!
It's such a good design. The dimensions are perfectly practical for a tool bag. Bigger than a lineman's bag, but smaller than a regular tool bag (or so it seems)... I keep watching this video. Where is your shop located in US? M
Hi nice job, i see you went straight for the serger to tame that canvas, sure does get unruly quickly doesn't it. Surprised your serger table is just short of meeting up with the outfield table to be flush.
I hear ya about people not wanting to pay the price. SEWING takes FOREVER and an 8oz spool of goretex is damn near $120 ! People don't realize that its not just thread. Let alone some material can be $20-30/yard.
I make custom LED lights to specifically fit under the harp. Id be happy to send one along.
I have one on my Juki 5550 and another on the Tacsew.
I used the overlock on the quilted pieces of my back pack. You can see that overlock machine sits @ 6" above the table. I have found it to be very handy to use. It can be seen in my backpack video if your interested.
toobglued i tried looking at your bio to see where I can go to buy those LD’s.. but had no luck .. do u have a internet ship somewhere??!! Etsy? Insta? Help! LOL
Love the video, insane talent. The bag looks great and just keep it up.
Thank you very much, I will.
Wow! Wonderful to see it done
🙌
I almost finished a bag like this today. Just have to prowl out in my garage and see if I have any rope. I had a painting drop cloth that I cut up for this. Thanks for posting this a couple of years ago.
Bravo
I appreciate you not talking thank you very much. I just need to watch this video 100 more times and then I can do it. Whats the soup that was made to go with the fried polenta 😋
Here is one that I talk. ruclips.net/video/lz-dL1OKAfs/видео.html Vegatable.
Two thumbs up for that great job thanks for sharing the video keep up the good work
Thank you.
Awesome stuff man, love the bag also love your minimalist logo. Subbed :)
Thanks for all the kindness.
Damn it!
Just as I was engrossed in this video, my wife came through the door unexpectedly.
I had to insist that I had been trying to find a video of naked women, and that I had not actually searched for a sewing video.
She thought it was hilarious.
(Hope the joke doesn't offend anyone - that's what I really said to her).
Thanks for a great video.
I have recently been searching local tool shops for strong canvas tool bags.
Have only found innovative but cheaply made alternatives so far.
But if I leaned how to fix my wife's sewing machine...
I'm not offended, I think it is hilarious.
Well...I've watched this video a couple of times and every time I try - in my head to make it more feminine but it's never the same as this one Alex makes. Awesome tote.
Very nice bag. Unlikely that my home machine will go through all those layers.
Thank you and you are correct. I love these machines, they allow me to make the things I dream up. Very rewarding.
TRAVAIL DE PRO ! J'aime très bien ❤
beautiful camera angles! Very nice!
How nice of you to notice, Thank you.
do you think this would work as well with Duck canvas material......I just don't know if they are the same gauge.
Sure, I have made bags with thinner, lighter material and they are great too. I would think any duck canvas would good for a bag. Heck, just go for it.
Very Nice!!!!
Such a great video and I hope I can follow after multiple times of learning and scrutinising (hope I use correct word). Thank you so much and hope to learn more. I am from Malaysia.
Also watch the video linked at the end, I think it will help. Good luck.
I want to ask how much a fat square (not solid) cost? Actually I am 62 yrs a pensioner and like quilting always learning from yr tutorials. ridzwan latiff is my son and I use his account. Last night I just finished my "Crossing Path" quilt and I' m so excited to sew more. Thank you for yr reply.
Yeah that would go good with soup and was my favorite part of this video.
😉
Very nice Video, I learned something........
What type of sewing machine are you using?
That is the Juki 1508. Everybody should have one. ;)
Hello
I look up you uki 1508. If you were to replace or update you industrial sewing machine what make and model would you buy?
Depends on what you want to sew, besides, 1 is never enough, I have a dozen or so.
Se ve que ama su trabajo. Exelente! Felicidades!!
Gracias.
Am I seeing this right? When closing the bag up you basted the 3 edges and then did a final seam all the way around the gussets? It is a cool bag! Thx!!!
Great video! I’m picking up a Jimmy Diresta vibe, and I mean that as a compliment. Subbed!
The guy is awesome. Thank you and glad to have you.
That's wonderful work you done
Thank you Jeannie Houghton.
Excellent, would consider another bottom material, as the bright canvas will look ugly fast, especially on grass. Probably use a leather or a better waterproof pvc or nylon groundsheet, like for heavy tents.
That is one theory and some great ideas but I take issue with your opinion that it will look "ugly". I find the visual appearance and patterns of use to be interesting and often beautiful. Often things are desirable because they are rusty or have a patina. Have you noticed that most brand new jeans have replicated wear patterns? Try this video out of another bag I made with "dirt" as a feature. ruclips.net/video/2qHdHUqWGK0/видео.html
Alexander Dyer Ney, you cannot compare wear marks on jeans or leather with grass and dirt stains on pure white canvas. Check out the Totepack Nr. 2 from Fjällräven. Nice leather bottom. However, of course this remains taste and that is often hard to agree one. Otherwise really nice bag.
I like leather bottoms too.
wow, what a beautiful piece of work. do you know approximately how many hours it took you to make it from start to finish?
Hmm, hard to say. Not including all the time to acquire the different machines that make it possible, I would say about 8-10.
wow, that's amazing. it would take me months, but i'm just a beginner. i know enough to be able to follow along and understand what you're doing and why it's all in the order you worked in, but the skills you use to make it... might be a bit beyond me at this point. but i'm inspired!
Merci pour ce partage.J'aimerais bien avoir une machine comme la votre !
You are a PRO!
Alexander by chance do you do custom work for people?? if so I would like to get in touch with you about that. Great work...
Oh sure, I do custom work, but nobody has been willing to pay my high fees. ;) email me if you want. Just click the "About" tab on my channel for my address. Thanks a million.
That was so awesome!
I like your style 👍🏻
☄️
Thanks,it is amazing, how long was the real time of sewing this tool bag?
A really nice bag, I like it, but could I make it after watching the video, even 10x, unlikely. Without ongoing commentary I have little to no clue why you were doing, what you were doing nor the reason for doing it the sequence presented. Really nice sewing and a good looking useful bag; you'll probably get many years of use from such a quality product. I think I'm envious.
This may help. ruclips.net/video/lz-dL1OKAfs/видео.html
it would be sick if you made a parachute bag.
Very fast, and found it difficult to follow. Love the machine. Which Juki is it?
I know it is fast, if I were to play everything at regular speed the videos would be much longer. It is a judgement call to be sure. If you are interested in making one I encourage you to just go back in the timeline a couple of times and I think you will get it. I have actually seen a couple of other folks make this bag based on nothing more than this video. Like this guy. ruclips.net/video/ZsOAF1ADgL0/видео.html
Also check out this other video of mine where I make a similar bag and there is some voice over with a few more tips. ruclips.net/video/lz-dL1OKAfs/видео.html
Juki 1508, it is in the description. I appreciate your comment.
Millions are spent making movies less interesting and entertaining than this. Thanks!
What a generous comment, I am glad you liked it, thanks a million!
True.
Really nice!
Ok I NEED one of these bags!!! Do you have an Etsy shop? I have been searching for a tool caddy, for crafting and this one seems perfect 😄
Outstanding, Alexander! I need to find a source for that narrow presser foot set for my 1508!
Mine is made by Kwok Hing. Not sure who carries that.
Beautifully made! I'm just about to upgrade to a bigger machine, a Juki 1510N-7. Also looking to get an overlock machine to simplify/speed up hidden seams. Any recommendations on particular options/capabilities to look out for with an overlock machine? I'm usually sewing cordura, sometimes with padding or thin foam.
Thanks. Juki is a good way to go. I love my 1508. This overlock is built for heavy material like denim and canvas. A lucky find on my part. I does shirting well too but I don't know about padding.
Hi, thank you for the video. I am trying to make a garden tool tote for a friend as a gift. On the cutting instruction, there are : Main Sacrifice Panel (1) End Sacrifice Panel (2) and the Inside Strap - Where do they go on the bag construction? Thanks so much.
Awesome! Well done , Sir!
CarpenterBea says Hi from Germany🤓
🖐
Get out of my wood ceiling you damned bee 🐝
OUTSTANDING !
THANK YOU!
This is awesome! Great work.
🙂
Do you sell these bags? They would be wonderful for craft room organization of sorts.
that's a cool bag and skillful talent you have. I'm curious what type of thread do you use for sewing canvas in that oz?
Polyester, Tex 105 or 138
Wow!! Very nice bag!!
Hey! Thanks!
It looks so easy on the video. Amazing work. I would like to know why you use 2 different machines (brother and juki)? is it different functions?
The Brother had smaller thread in it and at the time I thought it would be faster. In the end, a second machine is not necessary; The Juki 1508 is the real work horse here and would be capable of the entire job. Hope that answers your excellent question.
Alexander Dyer ooh you are so very kind to spend time to answer me!! Thank you very much sir. I am still a new learner of sewing i appreciate your kindness of sharing sewing knowledge here. 👍👍👍👍👍
This is the ultimate "man" tutorial. I love it 😂
Can you please say model of your juki machine because i am so intrested with your sewing machine and your bag
1508, Thanks
Can you show us how you make the handles?
For now I put some more explanation in the description. I have had a few questions on the handles so I wanted to put it where more people can see it. I have also included time cuts so that you can see me doing what I am explaining. I will have another bag video coming soon and I will be making the same kind of handles in that video so hopefully I will answer your question. Thanks.
Yep, Nice Job !!!!
Cool, sorry I don't understand 100% English,
but what i wanted to know, what was the fabric you used in the bag?
it was cotton canvas
and what was the weight?
I'm in europe ok
it says 15 oz cotton canvas in the description
Looks amazing!! You are very talented! Have you ever had to use a gelatine or starch on canvas to make it stiffer and not floppy? I would appreciate if you had any tips on that!
Thanks Sarah, the grommets are for anything that you may want to attach with a girth hitch. It is an old method. I don't starch my canvas, it is 15 oz. , it is stiff because it is thick.
hello what kind of material do you use? or what other material can be used? answer for a council please wait for your answer
Canvas is such a satisfying material. Is working with it equally as satisfying?
I like working with it and I like the products that it makes. Robust and substantial.