i have a 2004 lincoln towncar sitting on 14 inch spokes and put two knuckles on each front coils but noticed u put 4 will dat lift up a little more?I cant go through a carwash without it hitting on da bottom?!plz help me understand
Get you a 3/8 drive ratchet that’s heavy duty. With a 3/8 extension that’s at least 6 inches or better. Put the extension behind the twist-in lifter. Then twist right (clockwise)… until lifter twist in place. Make sure you place them across from each other
what's the big difference between the twist-ins vs the rubber ones? I got my panther sittn of 4s but it keeps hittn my fender when i go over a bump. i dont need to go that high i dont think, but def hafta get my fender off my tires... rubber cost too much & cracked fender keeps costn me
Moog heavy duty springs check the rating that to be the ones rated for 650-700 pounds the rear I used police springs off a 01 crown Victoria police rated at 700 pounds
Do you have any problems with those, I keep hearing people say that's the wrong way to put them in. One guy said he put only one knuckle in and it sits four to four and a half inches higher. I got a 2010 Lincoln Town car I'm trying to put some on but I want to make sure they all right, front and back.
Bro I’ve been using these knuckles for over 6years before I up graded to the 5inch cups. it depends on the type of spring you have and the correct size knuckles. Don’t believe what you see in the comments. Just try it💯
@@topiqchill241 I put them on yesterday, knuckles on the front 4 on each side, and the blocks on the back the ones you screw, 2 on each side. I got all my info from you my man, the way I figured out I needed the screw ones in the back was from a reply I seen that you posted on someone else's comment, or else I would have bought the knuckles for the back too and wasted my time. So far so good, exactly what I was looking for. Preciate ya!!!
Bro watch the new video I have on Lifting any old school bro I promise it’s very easy. May have to use a little of your strength but you’ll get it bro…
I was only able to put them in sitting in the lower setting not standing up tall for more lift due to them fliying out cause of the pressure when installing does them being in sideways make it more likely to pop out or does the weight or the car keep them in?
No he’s satisfied Honestly bro as long as you keep the maintenance up on the front end and alignments up to part you’re good until you decide to spend a bag on a full lift kit…
Lol you ahh comedian bro keep watching.. with this IQ I graduated, I got a full time good paying job, house, beautiful family. This how I talk if you don’t like it theres a million more videos you can watch. No disrespect will be tolerated on this channel. Can you comprehend that part!! Now learn how to focus on you own grind💯💯 Ya feel Me??
When you coming from nothing all odds are against you,,, but I bet you see me boss up. Keep living bro wisdom is key. Never judge a book by it cover!!! 💯💪🏾
I can't follow him consistently due to what I precieve as a purposeful way of speech that is practiced and copied but not natural enough to make me believe he isn't just for some reason pronouncing his words in a tone and way that is not his own
But yet , your grammar is terrible, while your judging, read that stupid shit you just scribbled 😂 boy sounded smartly retarded , while he's talking 😂 goofy ball, you just gave me instant headache 😂 gtfoh
A purposeful way of speech that is practiced and copied???????? 😂😂😂 tf 😂😂😂 bitch just say he's not pronouncing his worlds fully . Instead of that long dumb , run off sentence gibberish ! that made no sense, 😂 either!! meanwhile you can't pronounce or configure , a meaningful sentence , to make a simple statement!! Tf is practiced? You mean proper ? And pronunciation is copied ? Tf are you even talking about idiot 😂 you a smart dumbazz tho
But your grammar is trash 🗑 😂 , sir I'm going need you to read that long run off sentence , full of gibberish back to yourself slowly umm k . And see if that makes sense and not give you a headache 😂. Talk about a smart dummy. 😂 used big words in the wrong text .Made it long for no reason , just to make no sense !! 😂And then judge somebody else. ?! You have to be a Karen 😂! Try again
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Good job bro!! 👍🏾🔥
It looks a lot better after doing that great job I'm thinking about trying to do something similar to my car the back end setting low
It will surly help you cant go wrong cars look good lifted with a squat. bro continue to support the channel
try the hi jacker air shocks in the rear i got a 01 that thang do miracles my G i promise you
I like the way you did that I was thinking on buying f15 ish to put on
That boy ready for the flood🌊💪
Same, I agree and thanks for the video
Thanks for watching! Bro stay tuned!!
Did it make the ride smoother or worst or no change ?
Nice job homie💯
Thanks 💯
Great vids man, can i lift only the front and leave the back stock so it has more of a lifted front look and rear look lowered?
Yes with no problem bro
So how you only put a 2in lift on the back cause you put 2 spacers in the back instead of 4?
Put some air shocks on the rear g
Say fam where you get that chrome side piece on the silver merc by the door ? What it’s called ?
Chrome Pillar Post Bro
Where you stay if you close to memphis go to warford they sell all the parts needed for the panther body cars
2 hours away Thanks bro will do
I put 22s on my merc & the front scrubbing my wheel wells & frame. Ima try this
Bro it’s go work for sure
thats what im doing to my whip i put 22s on and the rear is scrubbing on every bump ugh
i have a 2004 lincoln towncar sitting on 14 inch spokes and put two knuckles on each front coils but noticed u put 4 will dat lift up a little more?I cant go through a carwash without it hitting on da bottom?!plz help me understand
I would try a couple more if I was you it will for sure stop the scrubbing
Ok how did you actually put them in and what tool did you use?? Explain more briefly please
Get you a 3/8 drive ratchet that’s heavy duty. With a 3/8 extension that’s at least 6 inches or better. Put the extension behind the twist-in lifter. Then twist right (clockwise)… until lifter twist in place. Make sure you place them across from each other
@@topiqchill241 yeah bro u skipped the install process that’s the hardest part
what's the big difference between the twist-ins vs the rubber ones? I got my panther sittn of 4s but it keeps hittn my fender when i go over a bump. i dont need to go that high i dont think, but def hafta get my fender off my tires... rubber cost too much & cracked fender keeps costn me
The rubber ones give you a softer ride really doesn’t matter bro but they will definitely fix your fender issue.
@topiqchill241 💪🏾 even better! Appreciate the knowledge. Can't complain bout having a softer ride. Its a marauder so its supposed 2 be that way lbvs 💯
I need to do do my car like this
I got a white 96 lifted all heavy duty from a 01 crown vic
What's the set up got a 95
Moog heavy duty springs check the rating that to be the ones rated for 650-700 pounds the rear I used police springs off a 01 crown Victoria police rated at 700 pounds
I was hoping you actually show us how to do it bruh cu I want mine done right. I got a 05 crown Vic with 24s
I was waiting to see him do it to
Broskii ! Is it safe to have a car lifted that high? I want to do this to my future car . Just want to make sure it's safe
Yes bro as long as you install them correctly 💯💯
But I would prefer 3 to 5 inch lift cups form Universal lift kits.
Man you still put them spaces in I need you to do mine
Yes sir inbox me on facebook
@@topiqchill241 what the Facebook
I have a 98 tahoe with air shocks in rear, will they work on my front springs?, cause my front is lower,
so will i need 8 total for my front?
Yes
Appreciate it 💪🏾
Do you have any problems with those, I keep hearing people say that's the wrong way to put them in. One guy said he put only one knuckle in and it sits four to four and a half inches higher. I got a 2010 Lincoln Town car I'm trying to put some on but I want to make sure they all right, front and back.
Bro I’ve been using these knuckles for over 6years before I up graded to the 5inch cups. it depends on the type of spring you have and the correct size knuckles. Don’t believe what you see in the comments. Just try it💯
@@topiqchill241 I put them on yesterday, knuckles on the front 4 on each side, and the blocks on the back the ones you screw, 2 on each side. I got all my info from you my man, the way I figured out I needed the screw ones in the back was from a reply I seen that you posted on someone else's comment, or else I would have bought the knuckles for the back too and wasted my time. So far so good, exactly what I was looking for. Preciate ya!!!
Can you still do donuts on those bro? Or they will probably fly out huh ?
Good shi 💯💪🏾🫡
trying to get knuckle on coil spring 1998 grand marquis.
Bro watch the new video I have on Lifting any old school bro I promise it’s very easy. May have to use a little of your strength but you’ll get it bro…
@@topiqchill241
I ain't trying to do it myself. Where u located ?
How many did u put on each side?
4 bro
What size rims yall throwing on um?
6s
Does it ride rougher over bumps?
Not at all ride feels stout
I was only able to put them in sitting in the lower setting not standing up tall for more lift due to them fliying out cause of the pressure when installing does them being in sideways make it more likely to pop out or does the weight or the car keep them in?
The weight will keep them in bro I will do a detailed video soon when I lift my brother crown Victoria.
@@topiqchill241 thanks bro
how many knuckles on each side
4 bro
Still need that hubcap?. I got 3!!
Yes
Yea bro still need them…. 💪🏿💪🏿💪🏿
@@rondieweltonjr.5052 yes
I three skar audio 15 Evl In my 95 Merc on 4s and the box homemade
Do I need an alignment after doing this?
Only if you plan to install rims or changing tie end rods or ball joints.
@@topiqchill241 I’m not. so I just Jack my car up and put them in?
Did u need a machine or something to put them in
I used a 3/8 torque wrench. With a 6 inch 3/8 extension .
Thanks bro it worked out great for me
What if I don’t want it as high can I just put 2
Yes the more you install the higher your springs will stretch. Vice versa..
How's the ride when them in? Any noise from em?
No he’s satisfied Honestly bro as long as you keep the maintenance up on the front end and alignments up to part you’re good until you decide to spend a bag on a full lift kit…
what did you use to put em in
1/2 inch torque wrench with 1/2 inch extension
Still need that hubcap?. I got 3!!
What is I don’t wast it as high cash I just put 2
Where yell boys from
Mississippi bro located in the delta!!
If I do this to my Vic can I put my 24s on
Yes for sure
Will this work with 26’s?
You would have to cut a lot on the finder weld and ik you don’t want that!! I would prefer 3 to 5 inch lift cups
@@topiqchill241 yo what’s ya fb or if I need to hit you up Fam
@@aintloudmilton5901 @topiqchill on Ig
ruclips.net/video/RVY3Itl33_s/видео.html
Just under eight minutes and I felt my IQ drop sixteen points!!
Ya feel me?
😆😆😆😆😆
Lol you ahh comedian bro keep watching.. with this IQ I graduated, I got a full time good paying job, house, beautiful family. This how I talk if you don’t like it theres a million more videos you can watch. No disrespect will be tolerated on this channel. Can you comprehend that part!! Now learn how to focus on you own grind💯💯 Ya feel Me??
Put some respect on my boy name
@@topiqchill241 bro his iq was already low. Keep the videos coming bro we enjoy them
Yo location bro
Greenville MS bro
Florence South Carolina male tire shop
Don't have make the ride hard
NO. WE DONT FKN FEEL YOU! I SUBSCRIBED BUT AUTOMATICALLY AM UNSUBSCRIBING
When you coming from nothing all odds are against you,,, but I bet you see me boss up.
Keep living bro wisdom is key. Never judge a book by it cover!!! 💯💪🏾
@@topiqchill241 ok now I can't deny that I don't feel you on that. Good game
Prison is good for you guys.
I can't follow him consistently due to what I precieve as a purposeful way of speech that is practiced and copied but not natural enough to make me believe he isn't just for some reason pronouncing his words in a tone and way that is not his own
💯💯
If I have 4 knuckles in my mgm but the front still scrubbing should I put 1 more in
But yet , your grammar is terrible, while your judging, read that stupid shit you just scribbled 😂 boy sounded smartly retarded , while he's talking 😂 goofy ball, you just gave me instant headache 😂 gtfoh
A purposeful way of speech that is practiced and copied???????? 😂😂😂 tf 😂😂😂 bitch just say he's not pronouncing his worlds fully . Instead of that long dumb , run off sentence gibberish ! that made no sense, 😂 either!! meanwhile you can't pronounce or configure , a meaningful sentence , to make a simple statement!! Tf is practiced? You mean proper ? And pronunciation is copied ? Tf are you even talking about idiot 😂 you a smart dumbazz tho
But your grammar is trash 🗑 😂 , sir I'm going need you to read that long run off sentence , full of gibberish back to yourself slowly umm k . And see if that makes sense and not give you a headache 😂. Talk about a smart dummy. 😂 used big words in the wrong text .Made it long for no reason , just to make no sense !! 😂And then judge somebody else. ?! You have to be a Karen 😂! Try again
What's his ig on the green 1