Ugly Drum Smoker Build with Access Door. "The Dark Horse"
HTML-код
- Опубликовано: 4 май 2018
- Awesome UDS Build for my Friend Aaron Webb.
Parts From UDSParts.com The Access door was easy to install and I will be using this option more often. Gives access to the Firebox, easy access to cooking on the bottom grate and takes the hassle out of cleaning out the bottom of the drum.
Be sure to Like and Subscribe for more Builds...If your thinking of building your own UDS, Join my Facebook Group, "Ugly Drum Smokers Texas". We can help you choose a Kit and give advice during your build.
Drum On!!! - Развлечения
Came out great!
That's a damn fine looking smoker! Nice job!
Nice build. You solved a problem I have had with UDS builds. Well done.
Joe Johnson awesome news.. thanks for reaching out
Thank you for sharing! So much!
This is really something for me..
Slick’s BBQ and Catering
Nice . I've been looking for this type of example. To have access to coals and wood like an offset
G’day what a beautifully built UDS, it is the best one I have seen and I reckon it would really smoke meat ect, congratulations on a well thought out and great looking smoker. Kind regards John Tasmania Australia
John Kinnane thanks John
Join my Facebook group ugly drum smoker is Texas
Nice! Curious, do you find the single 2 inch exhaust works better than multiple exhaust holes in the lid?
Scott, I used to use pinwheel dampers with 8 3/4 holes. But now I only use the single exhaust, I really like the simplicity of the 2 inch exhaust and keeping the smoke as far off the lid as possibly.
Would buy
Nice smoker, I'm about to build a couple of them, what is the digital temp gauge you are using on top ? I havnt seen any info on them. Thanks
John Kelley Solar Thermometer
Great video I’ve been looking at a UDS for my channel you got any advice
Frac Daddy BBQ I just subscribed to your channel, please do the same.
You should buy the $144 kit
And build your own . I can help you with advice
udsparts.com/kits/diy-uds-complete-parts-kit-for-55-gallon-ugly-drum-smoker.html
Where can you purchase the kit and door. Very nice
Simon Guerrero you can purchase at UDSparts.com
That''s SWEET! Where did you get the door from?
Reginald Whitfield Sr. UDSPARTS.com
How much I live in california would love to have one brother very nice I would love to order a custom smoker ty for the video 😀🍻
Apex drums in Los angels you can buy a drum with lid already sand blasted around $100
Drums like to run hot and can get dirty smoke easy, I’m adding a door to mine soon
did you mention what you have installed in the 1 inch bung hole? Now I want to modify mine with an access door. Great video.
Indy Live! That is a 3-1/2 inch stemmed solar thermometer
@@UglyDrumSmokersTexas where do you get one of those?
Indy Live! Weiss Instruments DVU35 Digital Vari-Angle Thermometer, 3-1/2" Stem www.amazon.com/dp/B008HQ8830/ref=cm_sw_r_cp_api_i_1nw2EbTTKW8W7
@@UglyDrumSmokersTexas thanks, thats a must have!
What model gasket goes in between the door and the basket
George Nettles Jr ...I got the door from UDSparts.com they sell the gaskets on their website ., High Temp gaskets and high temp silicone that is usda and FDA food certified safe
Nice build. Job well done. What would this cost if you built one for sale
With the door about $900
Where did you get the wheels from?
Robert Vasquez The Metal Shop 281-353-2412 Mark Griggs
Where do you source your barrels? I’m located in Baytown
Torqueaddict 550
I buy new at Sooner Container in Conroe..
however, I just picked up a dozen or so Smooth sided drums. I’m in Spring at the end of the Hardy toll road area . I’ll sell you one cheaper than you can buy in Conroe .
Join my Facebook Group Ugly Drum Smokers Texas and we can coordinate .
Torqueaddict 550
Subscribe to my channel as well. I just subscribed to yours
Ugly Drum Smokers Texas 10-4 I requested to join
Why did you not start with a flat side barrel? Yes it does look nice.
Question? What does something like this cost . ? It is NICE 👍👍👍👍👍👍👍👍👍👍.
You can order the parts from
UDSParts.com and build it yourself for about $400-$500..
I’d be happy to mentor you
Can you tell me where you buy your barrel dollies?
psauveca those are custom Caster Mounts...
I have them made at The Metal Shop. Mark Griggs 281-351-2412
Did you build the door as well?
No. I bought it at udsparts.com
Where in Tx is UDSPARTS located
I live in Weatherford . I keep some parts here.. but The website for them is UDSParts.com out of Long Island
@@UglyDrumSmokersTexas thx
What is the diameter of the pipes and Good luck
I drill a 1-1/2 inch hole for each intake
.. 2 inches for exhaust
Did the door come from udsparts.com?
Yes Sir. They do sell the door. And I love it. It eas my first door install, I believe every uds should have one.
Ugly Drum Smokers Texas. What saw and what size blade did you use?
How much would sell one for? I want one!
Jeff Shannon color is anodized orange ...
where do you live
WOW, so are you willing to build and sell by chance?
Eric Smith where are you located
St Louis MO.
Eric Smith it’s a hobby for, I have no clue as to shipping . I can help you to build your own
Eric Smith I’m in North Houston
ok, thanks anyway
Wow any chance I could get a price on somthin like this
Sean Rogers this UDS was special.. just truly a beauty...I can’t talk about what he paid, I might get him in trouble...
Are you on Facebook? Join my group Ugly Drum Smokers Texas and we can talk. My name is Steven Powell and I’m the group administrator
Suggestion: Try turning your phone on it's side to record. That allows the video to fill the whole screen on RUclips instead on a small section.
Can't even watch the video with the obnoxious music in the background