I love the build, looks great! How's the stability when moving/rolling it? I am not an expert, I never built one of these, but it looks like the wheels could have been moved out further, maybe even until they touch the inside of the bottom rim.
Kevin Fegan it did roll good.. but about a week after I completed it, I fabricated my own Caster Mounts that go on the outside of the drum. Check out some of my newer build videos and check them out.
VHT requires a minimum of 3 hours to dry before handling. But let me warn you now. This paint is delicate..Tape pulls paint. Use delicate Frog tape for most, but you have to use the blue tape for the white stripe around the ribs of the barrel. Pull the tape and rub it back and forth over your blue jeans for a few times to get the heavy adhesive off. Pull slowly when removing. What you will find is that when it pulls a little paint, to fix it, you have to wet sand it until smooth, then paint over. Prepping the drum is key.
Hiram Rodriguez get the $145 kit from UDSparts.com find a food safe drum and you can be in the one is cheap is around $250-$300. You get your paint from AutoZone, the engine enamel and primer. Join my Facebook group Ugly Drum Smokers Texas and we can help you as a support group during your build
Bbq cigars and brews You going to be so happy that you built a UDS. That UDS had three colors. It took 3 cans VHT Primer 3 cans Purple 2 cans gold 1can white 1 can base coat because I used Anodized paint. Join me on Facebook at Ugly Drum Smokers Texas and share your build
Ugly Drum Smokers Texas I’m making a Green Bay packers one. I’m in Australia so I’m not sure if I’m going to be able to get the same brand of paint but I’m sure I’ll get something similar.
OK, if they do not have the paint. Buy the high heat primer, and although I have never done it, I know a lot of people say they use regular spray paint over the high heat primer and it holds up.
Could you please tell me the hole dimensions for the intake pipes I'm ordering from udsparts.com. I really want to have everything pre drilled and waiting. I have everything but those.
Todd Lowe I use a 1 7/8 Metal Hole saw on my drill and that is plenty. I drill the center hole at 3 1/2 inches from bottom lip.. Join me at Facebook Ugly Drum Smokers Texas and I’ll help you thru your build
The Backyard Griller all drums come with Either an epoxy liner Or a simple rust inhibitor. These must be burnt out of the inside. So you have two options of either burning with the propane torch from the outside or building a fire on the inside after drilling holes in it to help with been elation to burn
Thanks Michael. Join my Facebook Group "Ugly Drum Smokers Texas" . We help fellow BBQ enthusiasts to build their own Ugly Drum Smoker a a support group.
sardomnumspa it is gold flake.. good eye Not sure about metal flake but here is a tip. Once you use VHT High Heat primer, You can use regular Walmart or Home Depot rust oleum paint. It will hold up as well as the high temp paint and cost half the price. Plus you can find that silver flake you’re looking for
I need to add to my reply. Actually I do cure it in a way. I always season the drum after painting so I am getting the drum over 200 degrees and I let it run for hours.
Ugly Drum Smokers Texas. Alright. Noticed that's completely different than the process you told me in reference to the video with the $139 kit. Why did you use a base coat in this case, but not in the video using the kit? Also, @ the 8:15 mark, saw something white on the lid, followed by another gold coat. What was the "white"? What equipment did you use this time? Where did you get accessories?
That is too cool! I'm building my first drum and definitely inspired! Geaux Tigers!!!
Man being from Louisiana I love this build, real nice!
Nice job. Enjoyed
Phil N Florence lets get your build started . Be happy to advise you
Yep knew you were from the Houston area. Christmas lights and in shorts.
That looks amazing!!! Great job guys
GEAUX TIGERS! I'm from Lake Charles.
I love the build, looks great! How's the stability when moving/rolling it? I am not an expert, I never built one of these, but it looks like the wheels could have been moved out further, maybe even until they touch the inside of the bottom rim.
Kevin Fegan it did roll good.. but about a week after I completed it, I fabricated my own Caster Mounts that go on the outside of the drum. Check out some of my newer build videos and check them out.
How does the paint hold up with the heat (granted it shouldn't really get over about 350 deg)?
Like always, way too cool sir ! Where did you get the bottle cap ?
C U FISHING
www.sportsfanisland.com/products/lsu-tigers-ncaa-bottle-cap-wall-sign
Thank you sir !
How many cans of VHT did you use on the drum?
Nice build. What is the temp device you have in/on the lid of your smokers in the video?
Weiss Solar 3-1/2 inch Stemmed thermometer
Can you tell me how long you let the VHT Engine paint dry before masking off for another color?
VHT requires a minimum of 3 hours to dry before handling. But let me warn you now.
This paint is delicate..Tape pulls paint.
Use delicate Frog tape for most, but you have to use the blue tape for the white stripe around the ribs of the barrel. Pull the tape and rub it back and forth over your blue jeans for a few times to get the heavy adhesive off. Pull slowly when removing. What you will find is that when it pulls a little paint, to fix it, you have to wet sand it until smooth, then paint over. Prepping the drum is key.
Hello great job 👍 What is the average cost for you to make one? I just wanted to not how much I am going to spend. Thank you
Hiram Rodriguez get the $145 kit from UDSparts.com find a food safe drum and you can be in the one is cheap is around $250-$300. You get your paint from AutoZone, the engine enamel and primer. Join my Facebook group Ugly Drum Smokers Texas and we can help you as a support group during your build
Great video! I’m building my own at the moment and I’m just wondering how many cans of paint it takes to spray the drum with the two colours?
Bbq cigars and brews You going to be so happy that you built a UDS.
That UDS had three colors.
It took 3 cans VHT Primer
3 cans Purple
2 cans gold
1can white
1 can base coat because I used Anodized paint.
Join me on Facebook at Ugly Drum Smokers Texas and share your build
Ugly Drum Smokers Texas thanks, I forgot about the white. I can’t wait for it to be finished
Bbq cigars and brews are you doing LSU.. if so, I used the Anodized purple, and you have to have the Anodized base cost to react with the paint
Ugly Drum Smokers Texas I’m making a Green Bay packers one. I’m in Australia so I’m not sure if I’m going to be able to get the same brand of paint but I’m sure I’ll get something similar.
OK, if they do not have the paint. Buy the high heat primer, and although I have never done it, I know a lot of people say they use regular spray paint over the high heat primer and it holds up.
Could you please tell me the hole dimensions for the intake pipes I'm ordering from udsparts.com. I really want to have everything pre drilled and waiting. I have everything but those.
Todd Lowe I use a 1 7/8 Metal Hole saw on my drill and that is plenty. I drill the center hole at 3 1/2 inches from bottom lip..
Join me at Facebook Ugly Drum Smokers Texas and I’ll help you thru your build
Is it necessary to burn off the paint from the outside of the barrel? Cant it just be sanded and repainted?
The Backyard Griller all drums come with Either an epoxy liner Or a simple rust inhibitor. These must be burnt out of the inside. So you have two options of either burning with the propane torch from the outside or building a fire on the inside after drilling holes in it to help with been elation to burn
Good job guys. Oh yeah, I almost forgot...wooo pig!
Thanks Michael. Join my Facebook Group "Ugly Drum Smokers Texas" . We help fellow BBQ enthusiasts to build their own Ugly Drum Smoker a a support group.
Where did you get the drum from??? How thick is the drum?
Douglas Thomas I purchased the Drum new at Sooner Containor in Conroe Texas. I believe the thickness is 11-11-11
What. Plot is that VHT paint that you used for the gold part, is that the gold flake? And do they have a silver flake (been looking but can’t find)
sardomnumspa it is gold flake.. good eye
Not sure about metal flake but here is a tip. Once you use VHT High Heat primer, You can use regular Walmart or Home Depot rust oleum paint. It will hold up as well as the high temp paint and cost half the price. Plus you can find that silver flake you’re looking for
Ugly Drum Smokers Texas My man! Thanks a bunch!
Was the gold flake “anodized” or just gold flake engine paint?
i wanna custom paint the outside so strip it to bare metal correct ?
Wayne Carter
Yes sir.. Barr Metal.. then use a heavy duty degreaser to clean before priming
What’s the chain for, hanging on the side?
Sean Murray I use the Chain as a Gravity Weight to hold the Paper Towels down in the wind, and i use it for pulling your UDS...
Did you let the paint dry, or did you cure ?
Kitchen Everything I let it dry each stage. The Anodized really stands out above the rest
I need to add to my reply. Actually I do cure it in a way. I always season the drum after painting so I am getting the drum over 200 degrees and I let it run for hours.
How many cans of paint did you use?
Jason Francis 2 cans VHT Primer, 2 cans Gold, 1 can white 4 cans Purple
Where can I get that kit
Papersacs UDSparts.com. Join my Facebook group Ugly Drum Smokers Texas. We can help you as a support group during your build
Did You Clear Coat It?
Salt Savage no clear coat .. just VHT High temp paint from Auto Zone
@@UglyDrumSmokersTexas Oh ok. Well do you clear coat any of the drums you build? Or do you just go with straight coats of primer and color
Salt Savage Mostly just primer and paint, however I use a lot of anodized paint, which when applied properly it looks like it’s been clear coated
@@UglyDrumSmokersTexas so apply high temp primer and then the Anodized stuff? What do you use for primer?
What specific colors and primer did you use?
Billy Joe I used VHT Primer, followed by VHT Anodized Base Coat, followed by Anodized Purple .. the Gold is VHT Gold Flake and the white is VHT white
Ugly Drum Smokers Texas. Alright. Noticed that's completely different than the process you told me in reference to the video with the $139 kit. Why did you use a base coat in this case, but not in the video using the kit? Also, @ the 8:15 mark, saw something white on the lid, followed by another gold coat. What was the "white"? What equipment did you use this time? Where did you get accessories?
Where could I find that paper towel holder? I cannot find that thing anywhere. Thank you in advance.
Kenneth green I custom make them. Join my on my Facebook Group Ugly Drum Smokers Texas and we can talk about how to get you one
Kenneth green look me up in the group., Steven Powell
Ugly Drum Smokers Texas I do not have a Facebook account but I do follow you on Instagram I will send you a msg. Thanks for the response.
Kenneth green great, drop me a line and I’ll get you the info
Ugly Drum Smokers Texas sent you a msg on instagram