Thanks to this video I’m getting one of these for my first airsoft pistol. First time going into a shop. I was like a kid in a sweet shop. Cannot wait till I purchase on Friday. Just got to wait to get it 2 toned. Thankyou
Hiya. I only put around 200 rounds through it and was doing well, the range was insane! I've since moved it on to someone else. The mags needed to be lubed up a little bit believe it is still going strong! Pheas
Army artillery are the way to go i have the R501 and it's great quality i chose it rather than golden eagle and the John wick pistol because of the quality of it.
Under the rmr mount there is the nozel return spring can you tell me If there is a gap between the end of the spring and housing for you to or is it juts mine? Good video and full of info
Thank you very much! I really enjoyed myself! The puppers are doing good, was hoping to sneak one in at some point but they are all fast asleep as the minute as is the mum so we just thought best to leave them be. Pheas
Hello! It uses any TM compatible Hi-capa mags. So From any brand that is known to work with or be the same as the TM hi-capa mags will work fine in it! Hope that helps! Pheas
I’m having the hardest time removing the screws off the rmr cover plate to replace for the rmr mounting plate. Is it a counter clockwise or clockwise thread? The screws won’t even turn! Help please
Hiya! sorry to hear you are struggling with it. They are just normal positive threads, so should come off the "normal" way ha ha, I find that using torx heads instread of hex heads helps to hold better, but you might have to brute force it off. good luck with it! Pheas
@@PheasAirsoft thank you for the response. I finally got it off yesterday. I think some people are thinking the cover plate (not the rmr plate) has real screws on it when in fact these are false screws. Didn’t even take off the screws except for the rear sight. Took a flat head and wedge between and popped the cover plate right off.
Hello! You will an adapter first to screw into the threads in the outer barrel. Then any tracer will attach to that adapter. The smaller and lighter the tracer is the better as it's less likely to counter weight the slide and cause misfires / misfeeds. Pheas
@@SpeedsoftAiden Hello here is a link to the adapter needed: www.taiwangun.com/handgun-parts/suppressor-thread-adapter-to-pistol-army-armament?q=adapter Pheas
@@PheasAirsoft Thanks for the reply, I only see two screws one on the top sight and one to the rear, I remove both easily, even I try to take out the nozzle housing, but the plate cover won't come off, it's so hard, don't know how, so weird...
Hello! I cant remember the specific dimensions, but its a pistol supressor adapter, I suspect its about 11mm positive thread to 14mm negative thread. Somehitng like this one urbanairsoftuk.com/product/lighter-m14-to-m11-adaptor/ pheas
Hiya. What has are you using and what kind of temperature are you shooting in. If the mag is already cold and it's cold outside the gas can at times not empty the whole mag. I'd also give it an extra fee seconds of gas charging to see if it has been underfilled. Try that first and then let me know how you get on. Pheas.
@@PheasAirsoft im playing in a 23-28 Celsius temperature and used 2 gas one for low temperature which last for 2 mag refill with bbs and i used some all weather gas which didnt last that long but after some expirements I check that i have to fill with gas for like 10 sec or so so it will be fully loaded mag before use But is it normal after the gass fill to last for 2 rounds of shooting?
@@defcrazegaming1113 You should really be getting at least one set of bbs fired form a gas charge, if its as warm as you have said then certainly more bbs should be fireable on one charge of gas, this is because it has such a large gas tank in the mag. Pheas
Brace yourself....Never release gas like that, at best you will dry the gas seal out or worse rip it and even launch it across the room. If you need to empty a mag do it the fun way, via the trigger. Second Stop saying Top Slide, have you ever come across a Bottom Slide? No, because there is no such thing, its a Slide pure and simple. As for the compensator and suppressor combo, I know its only Airsoft but, you do realise the suppressor fitted on the end of a compensator would actually make the gun louder? As for the weight its all in the Slide and Frame as the grip is Polymer because it is a 1911 Widebody Hybrid, STI owns the copyright to the term 2011. Other than the above GOCD Triggering things great review as always. IF you don't have defence details ( such as site / UKARA Membership Number ) on package they will simply hold package and contact you for your defence.
Hiya, thanks for the info, its appreciated. I have no background in real fire arms so the limited knowledge I have is from others or the odd bit of googling, its nice when people jump in and add a bit more context to it all. As for the gas release, I would never normally vent gas like that, it was just for the interest of how much gas was left after emptying the mag of BBs, I wouldn't condone gas dumping as I have seen the seals jump out of the top of the mag. As for saying top slide... you are going to have to change everyone's terminology in the airsoft world for that!! But keep fighting the good fight ha ha! With the suppressor... as you said, its airsoft and its allllll about looking cool regardless of the reality of it ha ha, people want suppressors on everything, someone even asked me if they could mount a scope on this pistol!! But It is interesting to see that it would make it louder with a compensator, why is that? Glad you enjoyed the review overall though, I do apologise if I triggered your OCD. Pheas
![Build the Ultimate Speedsoft Hi-Capa: Expert Tips and Full Build Guide [La Capa Customs Build]](http://i.ytimg.com/vi/pUMZiU0i0Q8/mqdefault.jpg)
![[Airsoft] - Army Armament R604 review](http://i.ytimg.com/vi/g01k4zws4gc/mqdefault.jpg)
Thank you to everyone who just joined me! Had a cracking evening chatting with you all! Pheas
Thanks to this video I’m getting one of these for my first airsoft pistol. First time going into a shop. I was like a kid in a sweet shop. Cannot wait till I purchase on Friday. Just got to wait to get it 2 toned. Thankyou
Glad it could help you out! Pheas
@@PheasAirsoft payed for it today. I’m so excited. Hopefully by Wednesday mine will be at home. Thanks again for the video.
Have you done a disassembly and maintenance of this gun?
Now thats a Nice Gun very Beast
in my country we pay premium for this model, approximately about 300 usd without all the attachments..
How is this gun holding up? Roundcount?
Hiya. I only put around 200 rounds through it and was doing well, the range was insane! I've since moved it on to someone else. The mags needed to be lubed up a little bit believe it is still going strong! Pheas
Does the thumb safety on it work, or is it just for looks?
Army artillery are the way to go i have the R501 and it's great quality i chose it rather than golden eagle and the John wick pistol because of the quality of it.
Under the rmr mount there is the nozel return spring can you tell me If there is a gap between the end of the spring and housing for you to or is it juts mine? Good video and full of info
Hiya, unfortunately I no longer have the pistol! I am sure someone on here should be able to help though! Pheas
@@PheasAirsoft thank you for your response
Is it good for left handed?
Hi, any idea what adapter your using to get the tracer on?
Is it 12mm CW to 14mm CCW?
@@AranSmithson hiya. It's the default adapter that comes with most Acetech tracers..I'm sure it's 11mm CW to 14mm CCW. Pheas
@@PheasAirsoft weird the one that came with my acetech brighter c doesn't fit.
@@AranSmithson it must be a larger one. The video is from 3 years ago, so my memory of it is a little hazy. I might have 3d printed an adapter. Pheas
DId you find out where did the little O-ring come loose from?
Hiya! It was a spare one that was loose in all the packaging that just happened to hanging around! Pheas
Does this shoot through cans
Hiya. It probably could do from a short range, at medium range I would expect it would still punch a hole in at least one side of a can. Pheas
Pheas Airsoft alright thanks
Well done for fitting all that in! How's the puppers getting on?
Thank you very much! I really enjoyed myself! The puppers are doing good, was hoping to sneak one in at some point but they are all fast asleep as the minute as is the mum so we just thought best to leave them be. Pheas
@Oliver Ince They are Bichon cross, currently the size of large mice! Pheas
Hello know what size is the key to remove the screws of the RMR? Thank you
Also where did you get the sight from?
Nice one...Good video...👍👍👍👍
What mags does the r604 use, the top part holding the spring back snapped and I've been looking for mags but I can't find the exact one
Hello! It uses any TM compatible Hi-capa mags. So From any brand that is known to work with or be the same as the TM hi-capa mags will work fine in it! Hope that helps! Pheas
@@PheasAirsoft thank you so much that helps a lot
I’m having the hardest time removing the screws off the rmr cover plate to replace for the rmr mounting plate. Is it a counter clockwise or clockwise thread? The screws won’t even turn! Help please
Hiya! sorry to hear you are struggling with it. They are just normal positive threads, so should come off the "normal" way ha ha, I find that using torx heads instread of hex heads helps to hold better, but you might have to brute force it off. good luck with it! Pheas
@@PheasAirsoft thank you for the response. I finally got it off yesterday. I think some people are thinking the cover plate (not the rmr plate) has real screws on it when in fact these are false screws. Didn’t even take off the screws except for the rear sight. Took a flat head and wedge between and popped the cover plate right off.
nice vid as always.
HEY please respond I need help on finding a tracer unit or a barrel for this gun plz and thx!
Hello! You will an adapter first to screw into the threads in the outer barrel. Then any tracer will attach to that adapter. The smaller and lighter the tracer is the better as it's less likely to counter weight the slide and cause misfires / misfeeds. Pheas
@@PheasAirsoft would you know the tread size?
@@SpeedsoftAiden Hello here is a link to the adapter needed: www.taiwangun.com/handgun-parts/suppressor-thread-adapter-to-pistol-army-armament?q=adapter
Pheas
Good 1st look Pheas ; ) Is that RMR mount made of metal or plastic..?
Glad you liked it! The rmr mount us a metal one. so far seems to be holding up very well! Pheas
Thats great. Thank you for the info..
I even can't remove the R604 rmr plate cover and replace the rmr plate, how could you do that?
Hiya, it came off really easily for us using the tools included. Will the screws come out at all, or is it the screws that are the issue? Pheas
@@PheasAirsoft Thanks for the reply, I only see two screws one on the top sight and one to the rear, I remove both easily, even I try to take out the nozzle housing, but the plate cover won't come off, it's so hard, don't know how, so weird...
Where can I get that thread adapter and what size?
Hello! I cant remember the specific dimensions, but its a pistol supressor adapter, I suspect its about 11mm positive thread to 14mm negative thread. Somehitng like this one urbanairsoftuk.com/product/lighter-m14-to-m11-adaptor/ pheas
Can we tech hi capa mags fit into this?
Hello I believe they are standard copies of TM ones so I would have thought so yes! Pheas
very nice gun cheers 🖤💛💖
What is the name for the type of sight mount this gun uses
Hiya, Usually referred to as an RMR mount. Hope that helps! Pheas
Can you do review on army armament r501?
Hello! Thank you for the suggestion! I will put that on my list of things to get in to unbox! Pheas
my pistol innit !
My mags don't shoot all the bbs it runs out of gas do you know why?
Hiya. What has are you using and what kind of temperature are you shooting in. If the mag is already cold and it's cold outside the gas can at times not empty the whole mag. I'd also give it an extra fee seconds of gas charging to see if it has been underfilled. Try that first and then let me know how you get on. Pheas.
@@PheasAirsoft im playing in a 23-28 Celsius temperature and used 2 gas one for low temperature which last for 2 mag refill with bbs and i used some all weather gas which didnt last that long but after some expirements I check that i have to fill with gas for like 10 sec or so so it will be fully loaded mag before use
But is it normal after the gass fill to last for 2 rounds of shooting?
@@defcrazegaming1113 You should really be getting at least one set of bbs fired form a gas charge, if its as warm as you have said then certainly more bbs should be fireable on one charge of gas, this is because it has such a large gas tank in the mag. Pheas
@@PheasAirsoft thanks i suppose i have to fill more than 10 seconds the mag with gas since it's a large gas tank
Can you use tm hi capa mag in this pistol?
Hiya. Yes you can! Pheas
Hows its been locked up Pheas
ur the best pheas!
Im really hyp on this gun
Would u sell this to me?
im feel like John wick when im handle it
Brace yourself....Never release gas like that, at best you will dry the gas seal out or worse rip it and even launch it across the room. If you need to empty a mag do it the fun way, via the trigger. Second Stop saying Top Slide, have you ever come across a Bottom Slide? No, because there is no such thing, its a Slide pure and simple. As for the compensator and suppressor combo, I know its only Airsoft but, you do realise the suppressor fitted on the end of a compensator would actually make the gun louder? As for the weight its all in the Slide and Frame as the grip is Polymer because it is a 1911 Widebody Hybrid, STI owns the copyright to the term 2011. Other than the above GOCD Triggering things great review as always. IF you don't have defence details ( such as site / UKARA Membership Number ) on package they will simply hold package and contact you for your defence.
Hiya, thanks for the info, its appreciated. I have no background in real fire arms so the limited knowledge I have is from others or the odd bit of googling, its nice when people jump in and add a bit more context to it all.
As for the gas release, I would never normally vent gas like that, it was just for the interest of how much gas was left after emptying the mag of BBs, I wouldn't condone gas dumping as I have seen the seals jump out of the top of the mag.
As for saying top slide... you are going to have to change everyone's terminology in the airsoft world for that!! But keep fighting the good fight ha ha!
With the suppressor... as you said, its airsoft and its allllll about looking cool regardless of the reality of it ha ha, people want suppressors on everything, someone even asked me if they could mount a scope on this pistol!! But It is interesting to see that it would make it louder with a compensator, why is that?
Glad you enjoyed the review overall though, I do apologise if I triggered your OCD.
Pheas