Hi, can you help me. I have the costa rmr plate. But I don't know how to take off the rear sight. I removed the screw on top of the rear sight, and removed the bbu, but it's still stuck. Do I just "push" the rear sight out? Thank you so much if you can help!!
I haven't seen the entity that you have a problem with, so I can't give you an accurate reply. If you want to dismantle the accuracy, you must also disassemble the internal air chamber.
@@ChrisAirsoftwhich one is the Costa version? All I see in the DMGear Tactical page is the 2011, Glock, and JMTC2 version. The 2011 version, I bought and shaved down. I’m guessing it’s the JMTC2 version that doesn’t need shaving?
You needed to file the rmr base plate or it was a dropin fit ? Also I see that you have a threaded barrel, you made it your self ? Is it a "fix" outer barrel or not ?
嗨 嗨 一庫走
感謝你的支持，置頂留言 特此紀念本頻道第一個斗內🎉🎉
Thanks for the video!
终于来了
上字幕花了不少時間 感謝您耐心等待
來了老哥
希望對你後續的安裝有幫助~
你怎么在哪儿都这么自来熟啊哈哈哈哈哈
@@tstartb7494 哈哈哈哈哈哈哈哈来了老哥
❤
🔥
Veeery niiice! It should come from factory this way, it's so attractive! What is the front sight?
Thanks~I bought this DMgear RMR baseplate,front sight is attached.
i use Staccato p duo. i like it very much
Nice gun
好帥啊
感謝你的喜歡
What kind of mags are those? They extend further down?
Just normal HI CAPA 5.1 mags , but AW TTI make higher bottom baseplate.
不是所有，是大部分吧，還是有一些成槍或套件RMR是可以鎖在滑套裡的
對呀 絕大部分 但是rmr下沉的實在太少了 不想特別分一個區塊出來講 哈哈
而且還會壓縮到飛機座的空間 那又是另外一個問題了
@@ChrisAirsoft 想請問您的板子是向哪個賣家買的？露天上面太多那種大陸賣家不確定會不會被騙
@@felixthewolf3258 我是直接從多毛戰術他們淘寶官網買的耶
Which brand are you using for the X300 torch? Mine cannot be tightly secured on the rail.
This is just a normal X300,mine shakes too, but I added things on the sides so he can clamp
博主有没有考虑给r603换上nova的握把哈哈哈
是有想過 但這樣604跟603太像了 所以後來沒有換
@@ChrisAirsoft 确实哎
Hi, can you help me. I have the costa rmr plate. But I don't know how to take off the rear sight. I removed the screw on top of the rear sight, and removed the bbu, but it's still stuck. Do I just "push" the rear sight out? Thank you so much if you can help!!
I haven't seen the entity that you have a problem with, so I can't give you an accurate reply. If you want to dismantle the accuracy, you must also disassemble the internal air chamber.
請問您ARMY的HICAPA使用WE或馬牌原廠彈匣的感覺如何?我使用馬牌彈匣發現好像效果不是很好，請問有哪裏可以做修正嗎?
原廠夾我怎麼測試都打不完一夾 不太清楚原因 而且很重
手邊也沒有馬牌的彈夾 目前用下來TTI的最順
建議TTI彈夾的抱彈嘴 彈簧跟出氣閥都換成Army原廠的
So for the RMR plate to fit correctly you had to shave it down? And modify the bbu?
If you're using the costa version rmr base plate, you don't need to cut the bottom
@@ChrisAirsoft Thank you!
@@ChrisAirsoftwhich one is the Costa version? All I see in the DMGear Tactical page is the 2011, Glock, and JMTC2 version. The 2011 version, I bought and shaved down. I’m guessing it’s the JMTC2 version that doesn’t need shaving?
@@jimmybracing The last option on his page is
COSTA/OPS 4.3
I don't think JMTC2 can be installed successfully
@@ChrisAirsoft do you have to modify the stock Army BBU in order to screw on the RMR base plate?
You needed to file the rmr base plate or it was a dropin fit ?
Also I see that you have a threaded barrel, you made it your self ?
Is it a "fix" outer barrel or not ?
I found the rmr base plate myself,R603 The factory has a threaded barrel
@@ChrisAirsoft Thanks a lot for your answer :)
@@ChrisAirsoftwhich plate did you buy
@@christianherrero8053 taobao search DMgear RMR and select type: costa
@@ChrisAirsoft thanks I realized after digging through comments. I found something of the same name on Ali express hopefully same item ? Lol
Why yours has "Staccato P" markings and mine does not?
I remember is only available in Asian version
@@ChrisAirsoft Thank you sir
@@FreeMind4492 Where can we get this version please ? :)
@@lovik2.0 I bought mine on Taiwangun, but it has no markings.
AW custom mags or Army mags? Which one do you recommend?
I recommend AW,because he's lighter
What kind of holster do you use
TMC - Glock17+X300 holster
Where did u get that trigger from?
This trigger is made by WE
請問DM出的那款costa轉接座能否直上R501?
我有看過有人裝過，但是能不能直上這點，我不太確定是否需要修磨
@@ChrisAirsoft 我剛剛爬文，找到一篇看起來是可以直上的，那我來試試看好了
@@airsofter0603 我相信這點小事情你沒問題的 ~
Will it fit a deltapoint replica? Sotach Deltapoint?
Different screw holes,recommended to use RMR or SRO.
也就是說r603裝costa的座沒錯吧
是的
@@ChrisAirsoft 感謝哥 不過R603缺貨XD 我自記持有604 不過都很想收來把玩!!
Where did you buy the rmr baseplate?
taobao search DMgear RMR
Thanks broo
Did you use the costa or 2011?, I've seen both on Aliexpress and saw you mention both but I don't know the language. Can you clarify please?
@@rolandosalas4352 Sorry, your reply was in someone else's message so I didn't get notified. R603 Use costa.
ARMY가 대만 메이커 인가요?
홍콩에 있는 제조자입니다
Bro where did you buy red dot mount ?
taobao search DMgear RMR and select type: costa
Thank you so much @@ChrisAirsoft
請問使用到現在有什麼問題與缺點嗎
Hop座下壓點容易變形 調整輪容易鬆 換個警星HOP座就完事
其他東西就目前為止沒什麼問題
請問我的TTI 2011可以用這個轉接板嗎？😢
同一個商品 有一個規格是2011的 可以試試看喔 ！不過淘寶要盡快下單 不然要等到年後才拿的到了
@@ChrisAirsoft 有連結嗎
@@user-qq9lj2hm7c搜尋 DMgear rmr 就有囉