Its fully TM hi-capa compatible. I own and upgraded one internally myself. I just put the maple leaf hopup and crazy jet inner barrel. It increases velocity and accuracy a little bit but wouldn’t upgrade it any further myself. The mags are 1:1 with TM
@@alcapo9600 Thank you so much for this answer, I had a gunsmith bros one built for me but don't want to use it for playing lol. But I will definitely be picking this up. What is the stock slide spring it has?
There is an elevation adjustment screw which adjusts the height of the rear sight with a screw and spring system. There is also a second screw found when you unscrew the elevation screw all the way and take it out. Take out the elevation screw and the elevation spring should pop out, and then there is a final screw on the base of the rear sight that screws into the nozzle/blowback unit under the slide. 👍 I just took mine apart today as I had cracked the nozzle... 😂
@@morgmil2596 so it looks like it might be, but I wouldn't buy one unless I was 100% certain or willing to file things down on the gun/part. Give Jag Precision / Army Armament an email and ask for dimensions or compatibility 👍
Draw back your slide, take a heat gun and gently warm up the barrels end, turn the orange tip clockwise. It will reveal 11mm clockwise threads so you’ll need to use an 11-14mm adapter to fit most accessories.
Is this gun fully TM compatible? Please answer. Or what are the TM compatible parts?
Its fully TM hi-capa compatible. I own and upgraded one internally myself. I just put the maple leaf hopup and crazy jet inner barrel. It increases velocity and accuracy a little bit but wouldn’t upgrade it any further myself. The mags are 1:1 with TM
@@alcapo9600 Thank you so much for this answer, I had a gunsmith bros one built for me but don't want to use it for playing lol. But I will definitely be picking this up. What is the stock slide spring it has?
How does the rear sight actually attach? Bought a second hand one and the rear sight keeps falling off. Not sure what im doing wrong?
There is an elevation adjustment screw which adjusts the height of the rear sight with a screw and spring system. There is also a second screw found when you unscrew the elevation screw all the way and take it out. Take out the elevation screw and the elevation spring should pop out, and then there is a final screw on the base of the rear sight that screws into the nozzle/blowback unit under the slide. 👍
I just took mine apart today as I had cracked the nozzle... 😂
@@seanwilson1818is the rear sight tm comptible?
@@morgmil2596 so it looks like it might be, but I wouldn't buy one unless I was 100% certain or willing to file things down on the gun/part. Give Jag Precision / Army Armament an email and ask for dimensions or compatibility 👍
How did you take the hop up out?
Would this handle co2 mags?
What if you cannot rotate the hop up unit?
How can i remove the cap on the mag i cant find it anywhere and idk how to do it
length of inner barrel?
Great video
How is the orange tip taken off to put on a tracer?
Draw back your slide, take a heat gun and gently warm up the barrels end, turn the orange tip clockwise. It will reveal 11mm clockwise threads so you’ll need to use an 11-14mm adapter to fit most accessories.
What is the recoil spring guide that you are using?
How did you get a metal outer barrel?
they all come metal on these:)
👍👍👍
how u get the orange tip off??
They screw off like any other blaster lol
@@jinxx3744Calling a John wick Src Baba Yaga Blaster is crazy you also could have just said airsoft 😂
👍👍👍