Watched so many videos, but none made as much sense as this one to me - never did this before nor have I ever worked with pvc pipes before. Thank you very much for this
You did a great job breaking this type of project down which for me can become overwhelming. I love how organized and clean it is and can be put away at the end of the season to keep it lasting a long time. I’ve invested in wicking beds and reusing ibc totes that formerly had fish oil for dogs in them… they’ve done amazingly well. This summer I plan on finally covering the plastic with cedar to clean up the look and help preserve from the sun but I still have areas that need a garden spot in the ground like for my herbs and strawberries and this would make a difference in how I water
Just a couple notes; 1)The Print on the pipe is already in a straight line. 2) Heat the PVC pipe end and "swag" it, and you don't need to buy the couplings - $. 3) The hose swivel comes in MIP versions, so you just need the FIP PVC adapter. There is also a PVC version of the swivel hose adapter with slip end - $. 4) I ended up building mine with emitters. 1/4" drill. 11/32" tap in a slow drill. Thread in the emitters. Constant pressure thru the pipe no matter how long. Available in 1/4 gph, up to 10 gph. Easy change - out to a different size / need, and plugs thread in for unused holes. Emitters add 10 - 25 cents each to the build. You can find Bargain Bags of them for even less. You can also add 1/4" drip feeder hose to "fine tune" the water location to things like Tomato plants, etc.
Just built our irrigation system out of pvc for a 16x20 vegetable garden. We used 3/4 for mainline and 1/2 for the rows. We did the shut off valves for each row also. Works great so far!
I have a question about the valves. I saw some at the big box store and there were different types of valves - they all look the same, same size but the description somewhat differs. some had ftp & the another description - I didn't take a photo so this is from memory. Hope you can clarify - thanks!
Instead of using the swivel to the threaded connection. There is a connector in the irrigation department thats female threaded and swivels. Less parts and cheaper.
Is there a limit to how many rows this will cover? It seems to me like if you have a bigger garden you might have to have two different sections because the water pressure will be diminished.
Looks great. I plan on doing something similar this week. I have a smaller garden about 12 x 20. Is there any reason why you chose to put the ball valves in the middle of the garden instead of at the end where you can control from 1 end and have far fewer valves? Thanks.
Thank you for the great video! I have a bunch of 1" PVC around. Would that be too big for this type of system using a standard water hose? My garden is about the same size as yours. Thanks in advance.
Great job and instructions. Thanks! I do have 3 questions. I wonder if this would work well for a 1000 sq. ft.garden? Do you only drill one hole in the pvc per plant to get the needed water to it? I would think certain crops would need more holes perhaps or would one hole (1/16") be adequate?
Thank You! I think you could do this for a 1000 sq ft garden but, I would avoid long runs of piping. If your run is too long, the water pressure at the end of the run will be weaker, and as a result, the plants at the end get less water. I set up my pressure valves in the middle of my garden so I would have a pressure valve supplying 20ft of piping instead of 40 ft. It also depends on if you gave good water pressure in general. If necessary, you could set up more than on zone. As far as the holes go; I would say start with one, and as your plants get bigger you can always add more. If you make a mistake, you can easily plug up the extra hole with some tape. Good Luck!
You can take a woven kitchen plate scrubber (ring like thing) and pull it apart. Tie a 15 foot string to one end and a pencil to the other end. Drop the pencil the the pipe and drag the scrubber through the pipe.
Watched so many videos, but none made as much sense as this one to me - never did this before nor have I ever worked with pvc pipes before.
Thank you very much for this
You did a great job breaking this type of project down which for me can become overwhelming. I love how organized and clean it is and can be put away at the end of the season to keep it lasting a long time. I’ve invested in wicking beds and reusing ibc totes that formerly had fish oil for dogs in them… they’ve done amazingly well. This summer I plan on finally covering the plastic with cedar to clean up the look and help preserve from the sun but I still have areas that need a garden spot in the ground like for my herbs and strawberries and this would make a difference in how I water
Just a couple notes; 1)The Print on the pipe is already in a straight line. 2) Heat the PVC pipe end and "swag" it, and you don't need to buy the couplings - $. 3) The hose swivel comes in MIP versions, so you just need the FIP PVC adapter. There is also a PVC version of the swivel hose adapter with slip end - $. 4) I ended up building mine with emitters. 1/4" drill. 11/32" tap in a slow drill. Thread in the emitters. Constant pressure thru the pipe no matter how long. Available in 1/4 gph, up to 10 gph. Easy change - out to a different size / need, and plugs thread in for unused holes. Emitters add 10 - 25 cents each to the build. You can find Bargain Bags of them for even less. You can also add 1/4" drip feeder hose to "fine tune" the water location to things like Tomato plants, etc.
Great tips here. Are you using the emitters on pvc and just popping them in? Or are you using those softer hoses?
Just built our irrigation system out of pvc for a 16x20 vegetable garden. We used 3/4 for mainline and 1/2 for the rows. We did the shut off valves for each row also. Works great so far!
Im getting ready to expand on the one that I built in the video. It worked great last year
omg you are a life saver this was so easy thank u so much
I have a question about the valves. I saw some at the big box store and there were different types of valves - they all look the same, same size but the description somewhat differs. some had ftp & the another description - I didn't take a photo so this is from memory. Hope you can clarify - thanks!
I think what you saw is that some have a male end and some female. I used female valves
Good job jimmy
Do you have a printed parts list? Great video! I can’t wait to try this!
Sorry no list
Awesome build!
Thank you!
Really great video.
I like this, I think Pvc pipe can last more than these black flexible irrigation drip pipes, but I stand to be corrected
Instead of using the swivel to the threaded connection. There is a connector in the irrigation department thats female threaded and swivels. Less parts and cheaper.
Thanks for the tip. That will come in handy this spring.
Thanks for this video, detailed and easy to follow. I also love the background music you used and wonder what it is/how to purchase?
Cheers
The music is from a royalty-free service that I pay for. No one famous but, some very music.
Great job!
Is there a limit to how many rows this will cover? It seems to me like if you have a bigger garden you might have to have two different sections because the water pressure will be diminished.
Yes. I didn’t have any problems with pressure but adding valves would turn it into multiple zones
Looks great. I plan on doing something similar this week. I have a smaller garden about 12 x 20. Is there any reason why you chose to put the ball valves in the middle of the garden instead of at the end where you can control from 1 end and have far fewer valves? Thanks.
Thank you! The only reason I put the valves in the middle is because I used fewer valves this way and was able to save money.
Also I plan on extending the garden next year having a very long run of tubing would create water pressure problems at the far end.
Do you reuse this per season and base your planting on the already drilled holes?
Yes. I will use tape to clog the old holes and drill new ones if I want to change planting locations
Thank you for the great video! I have a bunch of 1" PVC around. Would that be too big for this type of system using a standard water hose? My garden is about the same size as yours. Thanks in advance.
I was actually going to use 1” pvc but decided to go smaller to save money. 1 inch should perform just as well. Thanks for checking out the channel.
Great job and instructions. Thanks! I do have 3 questions. I wonder if this would work well for a 1000 sq. ft.garden? Do you only drill one hole in the pvc per plant to get the needed water to it? I would think certain crops would need more holes perhaps or would one hole (1/16") be adequate?
Thank You! I think you could do this for a 1000 sq ft garden but, I would avoid long runs of piping. If your run is too long, the water pressure at the end of the run will be weaker, and as a result, the plants at the end get less water. I set up my pressure valves in the middle of my garden so I would have a pressure valve supplying 20ft of piping instead of 40 ft. It also depends on if you gave good water pressure in general. If necessary, you could set up more than on zone. As far as the holes go; I would say start with one, and as your plants get bigger you can always add more. If you make a mistake, you can easily plug up the extra hole with some tape. Good Luck!
@@ArtisanMade doesn't the tape fall off from the water
What is the best way to clean out the inside of the 10’ sections of PVC pipes in my system at the end of the season?
You can take a woven kitchen plate scrubber (ring like thing) and pull it apart. Tie a 15 foot string to one end and a pencil to the other end. Drop the pencil the the pipe and drag the scrubber through the pipe.
Great video question what is the purpose of that sheet over the plants
Thank you! It helps block weeds from growing
I have a question: do you break it down in the winter time? I want to create something for a small garden but i am afraid of the winter time freezing
I pulled everything apart and put then behind the shed. Make sure you pour the water out, and they will store well in the winter
Is it possible to irrigate half acre land using PVC pipes and valves with water coming directly from a borewell (1' output).
Assuming you have decent water pressure you could irritate large tracts of land, but you would have to divide the system into separate zones
Nice thankyou very much
Awesome. Thank you.
Glad you liked it!
I want do one acre and motor is 3hp can gives good pressure
You should use drippers instead for an area that large. I am doing a video on this in a few weeks.
@@ArtisanMade ok waiting for your video and please tell how to drill dripper in pvc pipe
Can I use 1/8" bit?
Too big. It will be hard to keep consistent water pressure everywhere.
Covering your garden with that black plastic liner... Don't they kill all microbes and warms by sofocating with excesive heat ???
It’s not plastic. It’s a fabric.