Hey, Big Kountry, they make clear safety glasses.. 🤣 Glad to see your back on Chris' Hyperbusa! You rock man! Can't wait to see what you put that super charger into! Looking forward to your new build@
Hey Big Kountry, love the fact that you can wrench and I like the idea of doing something special to the hyperbusa motor. Don't tell your bro Chris! I've never seen him touch a motor.
if your tune is bad a procharger will eat itself and the engine if your racing with it get a couple spare prochargers but I think its awesome and at least it is belt driven not right on the crank so most of the issues won't affect it get extra belts can't wait to see it screaming in something great vid Kountry
lol you gotta always make sure the cutter is turned the right way. I love picking on you guys with this. 0 chance of anything getting in my eyes the way I use the tool
Good stuff. Built motor so not sure what you can really optimize, but maybe balance the crank to the built piston & rods, throw in bigger cams if not already done, lower the compression so chris can throw more than 40lbs at it. 👍
Yea I realized my wording has led people to think I was asking about upgrades to the engine. Really I meant the whole bike build in general. The engine in the bike is top notch from Htp
This engine is already fully built. Not much to do to it other than put it back like it was. I meant with the whole bike rebuild, we gotta do something cool
The engine only had 4 passes on it when it went down, don’t need to pull the head, block looks fine from the bottom. If the bottom end of the engine looked worse we would dig deeper into it.
made me laugh with your wife in slo mo... asfar as the bike? wind tunnel and balance the airflow or it will happen again.. i think it is an air density/air flow problem. i dont know if you took readings of humidty and air pressure for that day, so Do the WIND TUNNEL, and experiment
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Didn't know engine clean up could be so HOT!
Tell me about it!!! She definitely looked way better than me doing it
It was the breast part of the video .
@@bigkountry I don't know any personally but I bet there are some guys who like your long hair say the same about you lol kidding I hope NO DIDDY!!
Gottta tell ya, Big K sure knows how to keep us entertained 👌🏽😅, hydro dip the valve cover in a Moore Mafia art theme🔥
Hey, Big Kountry, they make clear safety glasses.. 🤣 Glad to see your back on Chris' Hyperbusa! You rock man! Can't wait to see what you put that super charger into! Looking forward to your new build@
Hey Big Kountry, love the fact that you can wrench and I like the idea of doing something special to the hyperbusa motor. Don't tell your bro Chris! I've never seen him touch a motor.
Haha it’s gonna be mine, and the internets secret
I could actually watch her work all day long qualities for sure 😊
if your tune is bad a procharger will eat itself and the engine if your racing with it get a couple spare prochargers but I think its awesome and at least it is belt driven not right on the crank so most of the issues won't affect it get extra belts can't wait to see it screaming in something great vid Kountry
I bet you would start using safety glasses once you have to have metal dug out of your eye. Sure changed my mind lol! Keep up the cool videos👍🏻
lol you gotta always make sure the cutter is turned the right way. I love picking on you guys with this. 0 chance of anything getting in my eyes the way I use the tool
Good stuff. Built motor so not sure what you can really optimize, but maybe balance the crank to the built piston & rods, throw in bigger cams if not already done, lower the compression so chris can throw more than 40lbs at it. 👍
Yea I realized my wording has led people to think I was asking about upgrades to the engine. Really I meant the whole bike build in general. The engine in the bike is top notch from Htp
@@bigkountry Titanium fairing bolts. 👍
Kountry did waay too much disassemblin. haha
Dayum she be F-I-N-E ❤
Squintervision.
I would like to make a suggestion, once the bike is together… take it to a wind tunnel for body work/fairing’s research
It’s definitely going there, we got some learning to do
Assistindo aqui do BRASIL sigo vocês já a muito tempo 🙏💪🇧🇷
Awesome to see the other countries chiming in!!
Clutch cover needs to go bigkountry style. Red, white, and blue. 🇺🇸
Don’t know if Chris will let that fly
@@bigkountry what if you leave the same engraving but add the flag behind it?
Big kountry you gone putcdat motor in that lil truck you got
Titanium retainers and valves and springs and cams aluminum rods 🎉🎉🎉🎉
Most of those Japanese engines are assembled at the Japanese factories by 18 year old teenage girls. Need to import me one to build my engines lol.
Hahahaha 15:41 it took aaaaal his strength not to be staring😂😂😂
I actually went back and looked and laughed at that myself
Haha boys wil be boys
If I was a betting man. Gen 1 pro charged motor is going in your little car replacing the 1000 moto so skid Mark has competition.💪💪💪💯💯💯💯🤔
I already know what that Busa motor is going in its gonna be the suzuki samari
Always gotta do it Kountry style! I think a full carbon fiber body and definitely titanium. You do Kountry style the best brother🤘
I know, that’s what I’m saying!!
Definitely need some cams if nothing else!
This engine is already fully built. Not much to do to it other than put it back like it was. I meant with the whole bike rebuild, we gotta do something cool
YOU ARE THE MAN
Fastest I’ve clicked on a video all day 😎
Lucky …lucky..lucky boy. You must have a 12 inch rod
Little guys get the job done too
Haahaha yesss
Sawzall dude!
We had a guy in Houston Texas that was doing superchargers but went under unfortunately.
Yea DAS performance does a great job. This is an extremely nice product, + they have been mid 6s in the 1/4 mile at 220+ mph!! They are bad ass
Slap that Gen 1 busa motor in gsxr 600 frame….lol
Safety squints over glasses any day lol
What about the head? Shit potentially in the cam journals?
Maybe time to send it out for some porting?
The head is fully ported on it, and clean
It's cold
Factory paint like pre- crash but you need to get more carbon fiber on the bike somewhere.
I been trying to tell him
The wife is a keeper for sure
She is the best
Why not check pistons, cylinder and rods?
The engine only had 4 passes on it when it went down, don’t need to pull the head, block looks fine from the bottom. If the bottom end of the engine looked worse we would dig deeper into it.
Good Lawwwwd
What happened to the 1st hyperbusa?
At Htp getting some diff upgrades, should be back soon on Chris channel
made me laugh with your wife in slo mo... asfar as the bike? wind tunnel and balance the airflow or it will happen again.. i think it is an air density/air flow problem. i dont know if you took readings of humidty and air pressure for that day, so Do the WIND TUNNEL, and experiment
We definitely going to the wind tunnel!! It’s only a couple hours from us