You will be able to do it without removing the lock. There just isn't very much space and is definitely a lot easier if you do remove it but you should be able to get in there anyway
Just fixed this on the wifes corsa, only snag was when crimping the hook its so soft it snapped😂, fixed it with electrical connector. Thanks for the video.🎉
I've just had to replace corsa D passenger door release cable due to the cable snapping where the hook is crimped to the cable. This video was really helpful. If you are just replacing the cable you don't need to push/disconnect the outer door hand rod and white plastic retainer to completely remove the lock. Just remove the three bolts holding the lock to the door and the electrical connecter. This should allow you to swing the lock out slightly inside the door panel and give you enough room to remove the broken cable and insert the new one. I suggest when inserting the new cable put the entire cable inside the door cavity so it's relativity straight which will make it easier to insert the cable end shaped like an L into the lock lever and then snap in. Re attach the electrical connector and lock using the 3 bolts and then the cable hook to the inner door handle as in the video.
Hi there im looking for some advise please, my daughter has a 2011 vauxhall corsa D the issue she has is the passenger door wont lock via keyfob or key, the driver and boot doors work as they should, When you press the door lock on the dashboard the driver and boot lock but not the passenger door, do you have any idea what might be at fault? Thanks Neil
I can't say iv ever looked at the back doors but I imagine it will be the exact same concept. Does it not open inside or out? As it's two different parts of the mechanism so usually one side will open up
There is 2 different cables to the lock. One going to the outside and one to the in. It's rare that the door won't open from atleast one side (in/ out).
![Diggy Graves - Red Vineyard [Official Lyric Video]](http://i.ytimg.com/vi/8Ro085T0mnQ/mqdefault.jpg)
Hey everyone. I hope this video helps. If you need any help feel free to pop me a message in the comments or my insta and I will reply asap
Hey mate, I need to replace my Door Release Cable. Can I replace this without needing the T40 and removing door lock?
You will be able to do it without removing the lock. There just isn't very much space and is definitely a lot easier if you do remove it but you should be able to get in there anyway
@@BrakesWheelsAutomobiles Alright mate thanks for the help & reply. Look forward to watching more of your videos
No problem mate. Thanks for the support🙂
Helped me thanks Buddy,, I don’t have (don’t use instagram) but will be subbing here
Thank you for this buddy. Just fixed my lads handle following your video. Exactly same problem and car. Saved me a fortune. Thanks lad.
Just fixed this on the wifes corsa, only snag was when crimping the hook its so soft it snapped😂, fixed it with electrical connector. Thanks for the video.🎉
Hi mate exact same thing happened to me how did you do this please
I've just had to replace corsa D passenger door release cable due to the cable snapping where the hook is crimped to the cable. This video was really helpful. If you are just replacing the cable you don't need to push/disconnect the outer door hand rod and white plastic retainer to completely remove the lock. Just remove the three bolts holding the lock to the door and the electrical connecter. This should allow you to swing the lock out slightly inside the door panel and give you enough room to remove the broken cable and insert the new one. I suggest when inserting the new cable put the entire cable inside the door cavity so it's relativity straight which will make it easier to insert the cable end shaped like an L into the lock lever and then snap in. Re attach the electrical connector and lock using the 3 bolts and then the cable hook to the inner door handle as in the video.
You just saved me a trip to the garage when replacing my door cable! Thank you so much, great video and helped so much.
Not a problem. I'm glad I could help
Thanks hey was using it for almost a year with that problem it took me 30mins to solve the problem
Great video .very helpful . Got it sorted 👍
W video W Guy had the same problem with the wire clamping it down has helped it to stay in place subbed straight away
Appreciate that mate thankyou
Could mention what car model this is! I have an insignia rear n/s door won’t open from inside or outside. Help needed!!
Any idea what a garage would charge to do this on driver's side?
Thanks for that, helped a lot..
Hi there im looking for some advise please, my daughter has a 2011 vauxhall corsa D the issue she has is the passenger door wont lock via keyfob or key, the driver and boot doors work as they should,
When you press the door lock on the dashboard the driver and boot lock but not the passenger door, do you have any idea what might be at fault?
Thanks
Neil
Any advice on how to open the rear passenger door. Think I've the same problem. Looked at a lot of videos to no avail. All advice appreciated. 👍
I can't say iv ever looked at the back doors but I imagine it will be the exact same concept. Does it not open inside or out? As it's two different parts of the mechanism so usually one side will open up
Great video. Do you perhaps know how to open a Corsa D bonnet that is stuck?
I don't sorry. I think the only way to sort it is the latch on the front so maybe try forcing that with something
How did you crimp the wire onto the hook? Everyone I get a little bit of wire in it just comes loose?
Hey I just used a pair of pliers for mine
Nathan like your video
Great work thanks
No problem. Thanks for the comment
Thanks man🫡🫡🫡
What if it opens from inside but wont from outside and your locked out
It will be on the pully side of the mechanism on the other side
Let’s hope I can do it on my Vauxhaull
This video cals "Car door won't open! How to fix on most cars", and he fixing the door with opened it. WTF?!........
There is 2 different cables to the lock. One going to the outside and one to the in. It's rare that the door won't open from atleast one side (in/ out).
when crimping the hook just crumbled.
That's odd mate
Ditch the music
Sorry duck next time I will try to make sure that everything I make is better suited to your liking
Sorry duck next time I will try to make sure that everything I make is better suited to your liking
Music is very annoying on back
Take the music off