Hi Katrina. I wanted to reach out to say thank you. I have learned so much from watching and following your videos. Purchased the metallic Puff from Amazon. I have completed two puff shirts based on what you suggested. They came out Great! I am an amateur. I was very fearful but learned what to do by watching. 😊Again thank you
Katrina, you are such a great entertainer🥰 Love watching your videos. Love the fact you are not affraid to show us the mistakes you’re making. All of us Entrepreneurs do. Love all what you’re making and learning a lot from you. Wishing you were my neighbor, live would be full of laughter and funny times😂 Thank you for everything. Huggs from overseas, the Netherlands! 0:06
I've tried both the Siser gold and silver puff vinyl and I like it. Has a similar issue with the image ( a name) having a slight dent in it. Overall, I like how it turned out. Press, peel the carrier sheet then press a 2nd time. 😊
Katrina I love watching you and I really do learn a lot from you. I think if you had included a tutorial on how you created the design using the Juliet would have been a game changer. With me being new to Leonardo software it would have been a great addition.
Question for y'all : how dangerous is dtf printing in ones home?? like how well does that ventilation work really to remove toxic fumes ? Does anyone have info on this?
Have you used the Htvront heat press with puff? That's the only press I have and I am failing at all kinds of puff. I have watch so many videos with very little positive results and none consistent.
Are you new to the channel? I have used that heat press in many videos. It works great. It depends on what you’re doing. If you need it for heavy pressure you will need to put a hard plate in it
Thanks for the response I have been watching a lot of your videos. I love them very helpful. I'm new to puff but have used my heat press for over a year I like it a lot, just not having success with puff. I have searched your videos for puff on the Htvront but haven't found one. @@katrinasgracefulcreations3711
This was a great tutorial and your shirt turned out beautifully. Can we use the Cricut Maker series to cut this HTV? Everybody always uses the Siser cutting machine.
I never use a Teflon sheet on the metallic puff! Try it without it and let it cool for a few mins. I LOVE metallic puff.
I think this was it too. I feel like the Teflon can make it a little too cool sometimes. AMAZING design though! Love it!
I was about to say that your on top of it. thanks
Hi Katrina. I wanted to reach out to say thank you. I have learned so much from watching and following your videos. Purchased the metallic Puff from Amazon. I have completed two puff shirts based on what you suggested. They came out Great! I am an amateur. I was very fearful but learned what to do by watching. 😊Again thank you
You are so welcome! Glad everything came out great ❤️🙏🏽🙌🏽
Love it!! Everyone on it that it's all sold out! Can't wait to get my hands on these babies!!! Thank you as always!
Katrina, you are such a great entertainer🥰 Love watching your videos. Love the fact you are not affraid to show us the mistakes you’re making. All of us Entrepreneurs do. Love all what you’re making and learning a lot from you. Wishing you were my neighbor, live would be full of laughter and funny times😂 Thank you for everything. Huggs from overseas, the Netherlands! 0:06
You are so welcome. Thank you for watching. I always try to entertain while teaching. Makes working much more fun
I've tried both the Siser gold and silver puff vinyl and I like it. Has a similar issue with the image ( a name) having a slight dent in it. Overall, I like how it turned out. Press, peel the carrier sheet then press a 2nd time. 😊
Metallic gold as been a great seller for me excited
Queen, it’s definitely🔥 and I can’t wait to see all the Interesting things you’regoing to-make! 👏
Thank you Yes more coming once I master it.
Great look. ❤ The Teflon sheet takes away some of the temp. Try again without it. If you want try parchment paper 😊
Katrina I love watching you and I really do learn a lot from you. I think if you had included a tutorial on how you created the design using the Juliet would have been a game changer. With me being new to Leonardo software it would have been a great addition.
I actually recorded it and forgot it out be accident. So i will do a separate video. I didn't want to make the video too long
Awesome design!!! ❤❤❤
Great video tutorial!!!
It turned out beautifully. Love it. You always have the best tutorials.
Thank you so much
I want to try the red!! It’s gorgeous!!
That is nice! It worked out pretty for me!!
Puff isn't really for intricate cuts but it came out great
THANKS FOR THIS VERY DETAILED VIDEO. WHERE DID YOU PURCHASE YOUR RULER?
Do you do anything special when washing puff to keep the great results?
I love that you show your mistakes.
Fire baby, fire. I know you're going to make something with the silver metallic...can't wait ti see it. ❤
Yes definitely and i will cut it on the cricut
Nice!!!!! I would add two bling studs
Great idea 💡
Thank you for sharing! Love the heel shoe. ❤
Thank you so much
I love your videos!! This is so beautiful 😍
It still turned out cute
Question for y'all : how dangerous is dtf printing in ones home?? like how well does that ventilation work really to remove toxic fumes ? Does anyone have info on this?
Have you used the Htvront heat press with puff? That's the only press I have and I am failing at all kinds of puff. I have watch so many videos with very little positive results and none consistent.
Are you new to the channel? I have used that heat press in many videos. It works great. It depends on what you’re doing. If you need it for heavy pressure you will need to put a hard plate in it
Thanks for the response I have been watching a lot of your videos. I love them very helpful. I'm new to puff but have used my heat press for over a year I like it a lot, just not having success with puff. I have searched your videos for puff on the Htvront but haven't found one. @@katrinasgracefulcreations3711
So nervous to try this!! But it sure is beautiful!!
No need to be nervous. gotta try new things. it's worth it
Love it.. shoe looks 3D
@@nean1286 it is that’s the whole point of the puff HtV. 🙌🏽
Aaaahahhahahahhaah I am so excited for you!!! Lol I love new stuff too and can relate...lol fantastic
This was a great tutorial and your shirt turned out beautifully. Can we use the Cricut Maker series to cut this HTV? Everybody always uses the Siser cutting machine.
Not everyone. you can definitely use a cricut or cameo. it gives the cut settings for that one as well. I will do a video on the cricut too
I saw this material pressed by someone else. They stated heavy pressure 8 seconds. So I’m confused and don’t want to mess up. This puff is not cheap
@katrinasgracefulcreations3711 Thank you, and I look forward to seeing it soon.
I use the Cricut maker and it cuts well
What program do you use w\Juliet please???
What kind of T-shirt printing machines do you use for home use? Because most of them are expensive?
Look at my videos on what you need to start a business. i show all the equipment
Hi, Katrina my question is.... Is Digital Heat FX printers is it a good investment?
I don’t have that I wouldn’t known
Mine wasn’t metallic after heat pressing it twice. It ended looking matte rather than shiny
I use the cardstock
Good video thanks looks good 😊
Love it!!!
#REPLAY
How ever did I miss your video???!
1:03
Maybe a little more pressure on t first press for t puff
I think it was a cold peel
Beautiful
Maybe that’s why it’s sticking?
🔥🔥🔥🔥
Loveee Metalic
Me too
Could it have been the teflon sheet
i think it was a cold peel some said others covered it with a teflon
Hello
300 degrees
Need more pressure i guess
Is it a cold peel?
Yeah I saw it was sticking on someone eles's after i i the video an they sai it was a cold peel. the dumb paper said HOT!
Waste of time for this failure hidden commercial for Sister
@katrinasgracefulcreations3711 I want to try it but I only have a cricut heat press will that work for this particular puff