FT8 Intro & Tutorial
HTML-код
- Опубликовано: 4 авг 2018
- This is a tutorial/intro on WSJT-X & the mode FT8.
FT8 is a fantastic newer digital mode that can be used with low power and in poor conditions. An excellent way to collect DXCC entities with less than optimal antenna system.
WSJT-X Download: physics.princeton.edu/pulsar/...
NetTime (Time Sync): www.timesynctool.com/
PSK Reporter (Digital Mode Reception Reporting): www.pskreporter.info/pskmap.html
~-~~-~~~-~~-~
Please watch: "Things To Get at Your Local #Hamfest"
• Things To Get at Your ...
~-~~-~~~-~~-~ 
Наука
Each video that I've seen on these has given me additional insights into how this works (thanks for mentioning ALC by the way... and how the messages sequence automatically). I managed to make a few FT8 contacts last night... took me a minute to figure out why nobody was answering until I figured out that I had the computer sound-card output going through the laptop speakers instead of the USB... but I noticed the transmitter wasn't putting out any power. I *had* already dealt with the network time issue, so I was pretty sure I was OK there. I think it may be important to remember if you are using a USB radio that if you take the computer away from the radio and put it back, make sure that the settings are still linked to USB devices and haven't "reverted".
Also thanks for mentioning how you view the mileage to the remote station... I had been looking for it in the confirmation box (where it isn't - but that might be a good enhancement to the software).
Good job! 73, KM6KV
Great info! Thank you for sharing with the group!
Good video. I'm getting set up to give this a try. You answered some questions i had. Thanks, Nb3P
Glad it helped Jim!
Thank you "macanudo" for your great explanation! 73 and good DX!
This is a really good video! Havn't been radio-active in years, but always had a 2weak spot for digital modes - starting to get the itch again with all the new modes (and advances in radios). thanks for your efforts! 73
You’ll love it! And if you miss the keyboard to keyboard aspect, check out js8call
@@AE4VJ It sure looks like fun! Just have to figure out a reasonable antenna for the attic ( HOA :( ) and break the news to the wife ;)
Good luck with that!
@@AE4VJ Fan dipole in the attic is hearing reasonably well. This is a lot of fun -- thanks again for the encouraging video.
Excellent to hear Shawn! Glad you’re enjoying it!
Excellent video. Thanks a million for the info.
Mark Campbell glad it helped! Need to do an update with v2.0
Thanks for this video, my wife (AE4YL) and I are trying to figure out FT8, and your video helped a lot! de AC4FS
That’s awesome! Thank you so much for the feedback! I’m glad I was able to help you guys out
That was helpful. I’m trying it for the first time. 73’s AC6CA
Great! Let us know how it works out
Thank you so much for this video. I have a Yaesu FT-950 with SCU-17 but I was still able to follow along with your setup :) 73 M3ENF
+TammieM3ENF extremely!! That’s awesome! Thank you so much for sharing and I look forward to seeing you in the long on FT8.
I am using the ft-450D with the scu-17 and the setup is working but the sculptor-17 the lights for PTT never light up I find it strange but in the end its working I guess thats what's important
Nice video, thank you. I'm using a compound callsign W5/ON6NP if I add this in the setting it will not bring the grid locator in the auto generate messages?
Very useful. Thanks
Thanks for watching and the comment!
Hold down the shift key, then click on the graph where you want the transmitt.
Great video....
Thanks Ray!
Cool share...very 73 MABUHAY!
Thanks!
hold shift while holding mouse on place you want to change transmit frequency
Great video. What level do you set Windows volume to? Should you adjust the level in Windows or the power on WSJT-X?
+Chris Argueta KI6AMK you may have to use both until a full release is issued. That is a known bug in current RC version.
I would get it close with windows and that way you have some adjustment in wsjt-x
Finally dipping my toe into the digital waters. A good mode for contacts and checking band conditions. I haven't had good luck with 35w but bumping up to 50w and the world is open. I know my antenna is not the best. 6BTV...
Excellent Thanks sorted-M0FXB
shift + left mouse btn moves the transmit
Great vid, thanks. How did you get the Country column to appear on the left window pane? I just installed the software last night and it doesn’t display that data.
I don’t remember having to turn that on. I need to update my software and see if that changed. So I’ll take a look and see if I can find that option
Thank you, very helpful...still new to digital modes...been away from HAM radio for a bit (3 decades...) agree with you btw, if it is conveyed by RF energy on ham bands...its HAM radio...😁...FT8 looks cool...can't wait to try it out...73s...de...AC3FB...
+Mark Flatt thanks for taking a look, Mark! FT8 is awesome and it’s pretty much the majority (90%) of my log for the past year. Have fun and hope to see you in the log!
@@AE4VJ definitely...need to upgrade my toys...I am mostly a QRP guy...I love going outside with my 819...but I am looking at a 991a instead and a laptop to take with me...my XYL goes with me on my hikes so maybe I can get her involved too...I will follow what you post...you were informative an helpful to an OG who feels overwhelmed in this digital age of HAM radio...
Very nice tutorial I would definitely watch this again. So did I see it correctly where as long as you enabled TX and everytime I picked a station it would do the rest for me from top to the bottom?
All you have to do is double click on someone calling CQ. it will do the rest.
@@AE4VJ thank you for your prompt response. I'm trying to observe that but it seems that I always have to click on it one by one in order for it to happen.
Ex i double clicked on one station and then my qrid square will show and then I will wait for his response and after that like you said it suppose to go down in order but maybe I missing some command? Can you briefly tell me step by step pls. I really appreciate it.
Make sure the auto sequence box is checked. It is usually checked by default.
tnx for this viddy
Dentar Inc glad to! Hope it helped
There is a shortcut key to move both Tx/Rx together. Read the manual for wsjt its in there.
Yep, Ctrl-click
Very helpful video. A bit difficult to see some details on a phone screen. Did you operate duplex? I read that it's not good to operate simplex. How is duplex or simplex operation setup?
I try to find a clear tx spot and lock the tx. I have found that really helpful working a popular station. It’s easy to do find a clear spot after watching the waterfall for a bit and click the waterfall (I can remember if it’s a shift-click or ctrl-click). Then, there is a check box to lock the tx.
@@AE4VJ Thank you!
Great video Thank you. Quick question though, how do you adjust the size of the signals (what settings are you using) on the waterfall ? Mine are so small and extremely hard to read. Thanks, Jim K2WPA
Those should be in the waterfall settings. Do you see those? They are at the bottom of the waterfall window. If not, I’ll have to check where you turn those on.
@@AE4VJ the 4 sliders at the bottom ?
@@MrJimmy440 can you email me a screenshot of the problem you’re having? My email is good on qrz
@@AE4VJ doing so now.
Just getting into to this. How do I set this up to auto log with Ham Radio Deluxe? Using a Xeigu G90. -N9GI
Not familiar with that radio. If it’s not in the radio list, you may need to submit a support ticket
Trying to find why when trying to make contacts the other station changes hertz. Do I also need to change hertz as well or just keep trying to make contact with station calling CQ Thanks W8BXR
Just keep calling no need to change your transmit
@@AE4VJ Thanks will keep trying.
did getting to work just don't know what Iam doing have 54 in the log
73 KQ4CD
Ha! You’re not alone. Fake it until you make it
I consider it more ham radio than using repeaters.
That’s awesome and well put!!
Quick question: I have my radio plugged in through a line in port. Is there any way to get the audio from the radio to play in my headphones so I can listen to it?
Are you coming out of the external speaker jack into the line in of your pc?
What radio are you using?
@@AE4VJ I’m using a Tecsun PL-600. My Elmor told me that I could use an auxiliary cable to plug my radio into my computer. I was successful at doing so, but I’d like to be able to hear the code while I’m decoding it.
Ok. You can go into the sound properties and on the input you can check the listen to this device. Right click the speaker icon in the gas bar and click sounds. Click the recording tab. Click the device your receiver is plugged into and click properties. Click the listen tan and you will see that check box
Is there a way to automatically send spots to dxfun cluster?
Let me see if they have a way to do that. May be able to do it with HRDLog. Are you talking about sendings spots for each person you work?
😊👍
Excellent Video, I am just seeing what this FT8 is all about, I am a ssb phone operator and do like to hear a voice coming back to my call...But would like to trying anything radio no matter what it is....But and there is a but it is getting to be that ssb phone is dead and FT8 is booming, Is it because we don't want to talk anymore???.....Or is it just because it is simple to use and easy to rake up DXCC quickly.......But I am going to give it a try, If I get it working and as I said excellent video Thanks.
+dentron160 I believe it’s mostly because of the low sunspot number as we are approaching the bottom of the cycle. FT8 is a lot more robust than sideband or even CW and being able to make contacts under poor conditions is, in part, what is driving the FT8 boom. With FT4 coming to a full release soon, the digital modes will be that much stronger. With electronic logging and LoTW, the instant gratification of a confirmed QSO makes it that much more attractive!
Thank you for you very kind words! They are much appreciated! Once you get wsjt-x going, check out the JTALERT video.
I am trying to figure out why on both my radios the radio transmits 500 hz lower than the tx freq
For example, on 20 mtrs my rig transmits 14.0735 but receives on 14.074 (ic7610)
Do you have your xit on?
HI Thanks for video , how are you able to view the scope and meter at the same time on your 7600 . Thanks
Andrew Macrides hold the meter button for 1 sec until it beeps.
@@AE4VJ Thanks for reply , I have done this but I can only view one at a time it doesnt allow me to have the scope and the Meter underneath .I an running version 2 Firmware.
Push and hold the M.SCOPE button. It’s the main/sub button
@@AE4VJ Brill thanks
It's not ham radio, but it's something to do with your ham radio while waiting years for the bands to open up again. Tic toc, tic toc, tic toc.
I want to send CQ for a specific Country. I have tried creating a macro, or just enter in one of the 6 lines on the bottom right. When I do this I get this symbol "" with CQ_XXX in between the brackets. I can't seen to find any info in how do you do this correctly. I can see others who are doing it on my screen. I will give you the exact example.
Give me an example how to type in CQ P43 xxxx FN41 xxxx would be callsign Thanks, Ken
That’s great feedback. It’s probably time to update this video with some of that info.
@@AE4VJ I have been told the problem is the "43" only letters are allowed. For a test I removed the 43
and I dd not get the < > symbol but unfortunately "P" could represent more than one Country.
Had it working and now no idea. Radio FTDX-1200 with interface SCU-17. Go to general tab set it up.
Next tab radio FTDX-1200
Com 4 at 9600 data bits 8
Stop 1 handshake none.
On to audio usb audio codec
Both in and out.
Back to radio to test and nothing under the test cat.
It goes to red. Nothing leave it set awhile and check audio codec is not found.
Sorry for the long text what is wrong. STUMPED
KQ4CD Paul
That’s a good one. Does the audio work at least?
Wow I didn't know anyone still used HRD since they turned it into a data mining piece of malware....
What mode do you set the rig at?
USB
@@AE4VJ USB / Data
Too many assumptions. What do the different colours mean for example? Obviously not a beginners video.
nice noise gate
LeadFoot Laboratories first video...can hear clothes banging around in the dryer and the dog lol. This was using the mic in the camera. The others got a lot better :)
@@AE4VJ lol I was just poking fun. Thanks for the vid. Im trying to setup wsjtx with my ANAN200D and PowerSDR. Having some issues but we'll get it. There's no slection for it under rigs.
LeadFoot Laboratories there is an option for HPSDR
LeadFoot Laboratories Anna-100d.wikidot.com/100d-digi
I actually had to use the Kenwood TS2000 as my radio lol. So i got it controlling my radio now, but im having an issue transmitting the audio going into POWERSDR via VAC. I see signal on the VAC line when i transmit, i am decoding the RX via VAC, my wig just won't transmit any audio that is coming in from v a c. Thanks for all your help Ethan great. We're almost there
i don't really see the excitement for a 2 second contact....
Randy Miller once you start working things in poor band conditions, you’ll get it. More times than not, even if the band seems dead, you’ll find something on ft8 and that is pretty cool.
Hike up a remote mountain far from populated areas and try activating QRP VHF SOTA. 4 QSOs are required for the points. Would you rather Call 4 hours on 2-6m or get 10 QSOs in 30 min with FT8 ?
Another tool in the box!
I understand a little more but still don't understand 73
What’s seems to be giving you trouble?
It is no different than POTA. I made 2 contacts in Irkutsk Russia on 20 meters at 20w with a EFHW strung into a tree. I found that interesting.
Ok…???
@@AE4VJ Quick contact like FT8. I see no difference. There are people who think you need to talk for 10 hours about the weather to make a contact kill me.
🤣🤣🤣
I don't like FT-8 because you can't have a decent QSO with it. It is more like contesting and I don't like contesting. So I don't use it. You can't talk about antennas or radios so for me it is useless.
I understand. Maybe you would like JS8Call. It’s like psk over ft8 and does even more.
FT8 is like watching paint dry!
It can be...it’s nice to work people when the bands seem dead though
Too Robotic !!!
Computer radio at is finest. Throw away the microphone. Computer is your Elmer. I want software for artificial intelligence to operate my radio. Mine will be called "Denny" and it will do all the operating and will even send off for certificates. Telepathy will be the final mode.
Why can't people just speak plain bloody English and actually explain how to set it up? Bloody waffle waffle waffle absolutely useless information
Not exactly sure what you’re talking about. Would you mind explaining?