3D Printed D.I.Y. LCG RC CAR ELCG MK2 DE Assembly manual movie
HTML-код
- Опубликовано: 5 сен 2024
- youmagine.com/...
or
cults3d.com/en...
Here is the purchase link for 3D modeling files that can be self-created.
Please be aware:
In the assembly process of the gearbox mount at 5:28, replace the M3x10mm bolt with an M3x8mm bolt.
Using the 10mm bolt can cause interference between the bolt and the gear, preventing smooth rotation
Non 3d-printed parts list
Capra Axle (Please purchase either option 1 or option 5)
1. www.aliexpress...
2. www.aliexpress...
3.www.aliexpress...
4.www.aliexpress...
5.www.aliexpress...
Gearbox
1.
www.aliexpress...
Transfer case
1.
www.aliexpress...
Linkrod (Purchase both option 1 and option 2, and pay attention to the options for option 2)
1.eye to eye 145mm and 118mm rod (Scx10-324mm)
www.aliexpress...
2.eye to eye 75mm and 80mm rod (2pcs 55mm and 2 pcs 60mmPurchase)
www.aliexpress...
In addition to these, you will need shock absorbers and drive shafts. Please purchase and use universal products according to your preferences.
Shock absorbers
80mm~110mm
Drive shafts(approximate length)
53-60mm 1pcs
94-119mm 1pcs
119-159mm 1pcs
Please note: The links to the products above are for reference only. Availability and prices may change frequently.
Parts List
1. Motor
-Brushed motor or brushless motor 1pcs
2. Axle
-Capra Axle 1pcs
3. Gearbox
-Ultra Light LCG Metal Transmission Low Speed Gearbox 1pcs
4. Transfer case
-Aluminum Alloy Transfer Case 70mm Width 5mm D-Shaped Shaft 1pcs
5. Linkrod
- eye to eye 145mm 2pcs
- eye to eye 118mm 2pcs
- eye to eye 80mm 2pcs
- eye to eye 75mm 2pcs
6. Servo motor
-35kg servo 1pcs
7. Servo horn
- Ajrc 7075-t651 Metal 25t Steering Arm Servo Horn 1pcs
8. Drive shaft
- 53-60mm 1pcs
- 94-119mm 1pcs
- 119-159mm 1pcs
9. Shock
- 80~110mm 4pcs
10. Bolt
-M2x6 8pcs
-M2x8 1pcs
-M2x10 4pcs
-M3x6(Flat head) 2pcs
-M3x8 8pcs
-M3x10 12pcs
-M3x12 7pcs
-M3x15 14pcs
-M3x20 12pcs
-M3x25 15pcs
-M3x30 3pcs
11. Nut
-M3 6pcs
12. Washer
-M3 3pcs
마술사가 마술방법을 공개해서 마술에 대한 관심이 커졌듯,
덕분에,
덕후에서 일반인으로 관심의 경계가 넓어질 것 같네요.
미쳐 생각하지 못했던 부분인데 이해하기 쉽게 비유와 함께 설명해주시니 감사합니다^^
일반인(?) 친화적인 영역도 찾아보겠습니다~
돌아오셨군요~ 환영합니다!
내집에 내가 돌아온걸 환영해주시다니 정말 영광입니다ㅎㅎㅎ
항상 힘이 되고 건강한 말씀 해주셔서 감사합니다~~
열심히 할께요~~
As expected, you're a professional~~
Thank you for your kind words
홀린듯 시청했네요 🤩👍🏼 잘보고 갑니다 👏🏼👏🏼👏🏼
앗!!! 이 지루한 조립가이드영상을 보셨어요ㅎㄷㄷ 시청감사합니당^^ 좋은하루 되셔요~~
Would any 1/10 scale parts work with this chassis? Another great build and video. Great quality parts.
I used 1/10 scale parts. To ensure the durability of the parts, I'm printing at a higher temperature, even if the surface turns out a bit rough. Your kind words and support mean a lot to me
Wow, that's exactly the project i needed, it is awesome 🤯 right now i have wpl with many upgrades but dont perform well so instead of expendingmore money on it started to think about a different option and this is the best one, curious about does exist a way to get the parts list without the need of buying the file, i would like to check all parts required and them buy the files when have all them, I'm planning to buy a roll of nylon or petg cf for try it on my printer so thinking these materials would be great for this project
Thanks for visiting, my friend. The cost of 3D printing is affordable, but the cost for the drivetrain, including the axles, is not exactly cheap. I've done a lot of driving tests, and the durability of the chassis and body (3D printed) was really good. The climbing ability was also pretty decent. If you provide your email address, I can send you a list of the required parts and options. There’s a 10% discount promotion on YouMagine right now, so it would be a good idea to purchase it.
@@elvisrcchannel4590 thank you so much, i´m trying to comment the email for the part list but by not reason youtube delete my comment 😥
@@TheFpc20 I have posted the parts list you need to purchase in the 'Show More' section below the video. I hope you have a wonderful day!
@elvisrcchannel4590 awesome, thank you so much buddy, really really appreciate it🙏
엄청 가볍겠네요 LCG가 전체적으로 가벼워야 될텐데 이거는 최고의 옵션이 될것입니다 ❤
기성품에 비해 무거운편이긴 합니다^^ 대신 배걸림을 최소화 해서 상대적으로 주행성이 좋은면도 있습니다. 방문해주셔서 감사합니다~~
Hi, great project, what gearbox and transfer case do you use?
Thank you, my friend.
gearbox
ko.aliexpress.com/item/1005006969174178.html?spm=a2g0o.order_list.order_list_main.78.6af8140f73WgCM&gatewayAdapt=glo2kor
transfer case
ko.aliexpress.com/item/1005005947630237.html?spm=a2g0o.order_list.order_list_main.83.6af8140f73WgCM&gatewayAdapt=glo2kor
Was expecting more electric guitar 😂
Amazing work bro!! Is this petg?
I made everything out of PLA it's reasonably sturdy.
@@elvisrcchannel4590 i will be purchasing this on the weekend 🙂
@@vhrte49 Really😃 Thank you, my friend. I will support the build wherever possible. I wish you always be happy👍
So cool!!! Is the course 132 feet or 60 feet?
Thanks, my friend. I appreciate your interest
What brands axles you use ?
I bought axles from the brand RS-RC for the video, but the quality of the gears and bearings was really terrible. So I replaced the gears and bearings. The durability of the plastic axle housing was quite good, so I kept using the RS-RC rear axle housing. The durability of the front axle housing was also good, but I replaced it with a KYX metal housing.
What size pinion on the motor mate?
ko.aliexpress.com/item/1005006969174178.html?spm=a2g0o.order_list.order_list_main.89.7d671802Q6gqpo&gatewayAdapt=glo2kor4itemAdapt
"I used the gearbox from the link above. I used the pinion gear included in the package of this product. The detailed specifications can be found in the description section of the link.
@@elvisrcchannel4590 Thanks mate!
@@elvisrcchannel4590 Aah i have that on order. Didn't realise it came with pinion
@@vhrte49 If you encounter any difficulties during assembly, feel free to let me know anytime. I will respond sincerely and in detail.😄
@@elvisrcchannel4590 Thanks!
wish that was 1/24 or 1/18
I'll give it a try if I get the chance