Thank you,, i tried same step with cube programmer.. its workings.. parameter name only differ.. thank you.. you save me lot.. searched everywhere, this method worked for me..
Hi, I did all the steps, but in the end, instead of programming with ST Link Utility and ST-link V2, I used STM32 Flash Loader and USB to TTL, and apparently the file was transferred, but it didn't work. Does the HEX file only need to be transferred via ST-Link for it to work?
nice video thanks, just a head's up before trying this just remove the cover from the St-link v2 and look the ship if it is a STMF103c8T6 it should work with regular method like the official one. In the case of GD..or other replica this method would work as well was arduino 2.xx it has a compatible generic board list of F1, f2, f3 and f4 stm32 based boards.
Nizar, sorry for russian language, but.... СПАСИБО БОЛЬШОЕ!!!❤ Очень помог!!! У меня определялась плата, все вроде хорошо. Я целый час потратил времени, и знаешь что? У меня код не загружался из-за ПЕРЕМЫЧЕК (jumpers BOOT)!)) Всё заработало, время 0:40, 10.05.2023 У себя на канале даже видео выложил) Thank you, Nizar!!!
I've just replaced the fake STM chip in the ST-Link with the original, and it works fine, but supposedly if you change the Shared option in Cube Programmer from Disabled to Enabled it should also work on the fake STM chip in the ST-Link.
sir ı have encounter a program while ım trying to debuging my code can u help me to fix that problem please Error in final launch sequence: Failed to start GDB server Failed to start GDB server Error in initializing ST-LINK device. Reason: (18) Could not verify ST device! Abort connection.
Thank you,, i tried same step with cube programmer.. its workings.. parameter name only differ.. thank you.. you save me lot.. searched everywhere, this method worked for me..
Thank you so much, i has struggled for this for 2 days until i met you.
you did a great thing for me i am new to stm32f103c8t6 and dont know how to load the code but you saved my life you are a great person
Thank you sir
My problem is solved with your help after 3 days of effort.
thank you for solve this problem. you save my life . god bless you
thank you bro, you were very helpfull
thank you very much searched everywhere, this method worked for me
YOU ARE THE MAN!!!
Tank you very much for help.
Thank you for the video. But what if I would like to debug the program? Is there any alternative for that too?
Thanks! For a second I thought I was going to have to use stm32duino.
Hi, I did all the steps, but in the end, instead of programming with ST Link Utility and ST-link V2, I used STM32 Flash Loader and USB to TTL, and apparently the file was transferred, but it didn't work. Does the HEX file only need to be transferred via ST-Link for it to work?
Thanks 👍👍👍🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
nice video thanks, just a head's up before trying this just remove the cover from the St-link v2 and look the ship if it is a STMF103c8T6 it should work with regular method like the official one. In the case of GD..or other replica this method would work as well was arduino 2.xx it has a compatible generic board list of F1, f2, f3 and f4 stm32 based boards.
thank you very much
thank you bro its working
What If i want to print the message "Hello World" on the SWV ITM Data console? How do I do that if the same error occurs?
Nizar, thak you a lot!!!!!
It works, bro thanks
oh so nice trick. thanks bro.
Perfect thank you
Nizar, sorry for russian language, but.... СПАСИБО БОЛЬШОЕ!!!❤
Очень помог!!!
У меня определялась плата, все вроде хорошо. Я целый час потратил времени, и знаешь что? У меня код не загружался из-за ПЕРЕМЫЧЕК (jumpers BOOT)!)) Всё заработало, время 0:40, 10.05.2023
У себя на канале даже видео выложил)
Thank you, Nizar!!!
You are a fucking genious. Shareout from Russia
hello I want to read and save hex file from any stm32 or stm8 is it possible?
I've just replaced the fake STM chip in the ST-Link with the original, and it works fine, but supposedly if you change the Shared option in Cube Programmer from Disabled to Enabled it should also work on the fake STM chip in the ST-Link.
i got a message when i click on connect button. it said "No--St-link detected" ... Can u help me please?
tq
спасибо. работает....но не то пальто....CUBE IDE -хотелось бы победить , что бы решение в 1 кнопку.
I encounter the error " The elf loader Sector Erase function fails". Could you show me how to fix it, please? You're the best.
Thank you very much. Is it possible to explain the way to download the code and prevent it from stealing
I am sorry. RUclips auto subtitle translated ST-Link as stealing
@@NizarMohideen I am sorry . I want you to explain how to protect the code from copying or theft
kızlar daşşağını yesin . helal , çözdüm işimi
sir ı have encounter a program while ım trying to debuging my code can u help me to fix that problem please
Error in final launch sequence:
Failed to start GDB server
Failed to start GDB server
Error in initializing ST-LINK device.
Reason: (18) Could not verify ST device! Abort connection.