Fake ST-Link V2 clone repair (with subtiltes)
HTML-код
- Опубликовано: 6 авг 2024
- Please note: There is no audio, but subtitles are available.
Recently, the market has been flooded with fake ST-Link V2 clones... fake clones, who would expect that?!? They are based on Geehy/Apexmic APM32F103CBT6 chip. They work fine with the old STM32 ST-LINK Utility, and partially with the ST-Link firmware upgrade tool, but not with STM32 Cube Programmer. 
Наука
MUCHAS GRACIAS POR TUS APORTES LA VERDAD HABIA COMPRADO 3 Y TODOS CLONES ASI QUE TRAJE EL IC ORIGINAL Y LO PROGRAMARE ESPERO QUE TODO SALGA BIEN
No hace falta, es un problema de software no de hardware. ST mete unos códigos anticopia en sus programadores oficiales. La solución del video, grabando un firmware antiguo es correcta, pero no es necesario reemplazar el chip. Yo tengo unos cuantos Stlink, unos funcionando con APM32 y otros con CKS32 y funcionan como originales.
There was no need to replace the APM chip (the Geehy version is a good one adding more peripherals like a nice FPU). It just was a software issue, not a hardware one. ST Micro includes some anticlone features within their programmer fw's. However the cheap clone is still useful. If you want to be able to use the clone as it is, just turn the shared option to "enabled" and then hit on the refresh button next to the serial number. After that the stlink will connect to the device.
I had to delete most of my comment because YT removes it if I try to comment a solution.
Nice to know that, yet I have no chance to verify that, as I no longer have any ST-Link with APM chip inside.
@@mariobv947 Comments usually disappear when you put a link in them or use swear words.
@@TzOk I know that but i removed everything that looks like a link and still disapeared. I will try again though.
@@mariobv947 Bro i have the same issue, I don't understand what u mean by "shared option" can u elaborate.
I got a batch of these, would not work with STM32CubeProgrammer. However on Linux I was able to apt-get install the following applications which did then work with the ST-Link V2 clone.
stlink-gui - OpenSource ST-Link tools replacement.
stlink-tools - OpenSource ST-Link tools replacement.
On Windows they also work with the older ST-LINK Utility.
What is the difference between using STM32 ST-LINK Utility and STM32 Cube Programmer?
Cube is integrated with the STM Cube IDE...and is way more convenient to use and better looking too.
I have this problem when i try to connect
UR connection mode is defined with the HWrst reset mode
I think you are trying with CubeIDE. Please enable share option and then refresh.
@@mdshohelrana638 In fact i solved it using STM32 ST-LINK Utility instead of Cube :) But thanks for helping!
@@GatoRockYou You are welcome!
hello I have this st-link clone which chip you changed to work
I replaced with STM32F103CBT6. Please note that a STM32F103CBT6 MCU costs more than a ST-LINK/v2 clone dongle.
Could you please share the link of stlink.hex file
One of many: github.com/open-plc-com/firmwares/tree/master/STM32F103C8T6/ST-Link
Another one: www.eevblog.com/forum/microcontrollers/original-st-link-v2-firmware/
And forum topic: www.eevblog.com/forum/microcontrollers/original-st-link-v2-firmware/
Thank you so much for sharing the links.
I have flashed the STLinkV2.J16.S4.bin without updating the bootloader, and then upgraded from Cube.
e.pavlin.si/wp-content/uploads/2016/02/STLinkV2.J16.S4.bin_.zip
In 5 words or less, what just happened? ;)
old chip fake new authentic
in non-idiocracy language basically the first chip was a clone and he used a hot air station to remove the clone then he got an authentic version of the clone and he used the same hot air station to put the authentic one where the original clone was
hi guy please can send me file stlink.hex please