STM32 with ST-LINK & Arduino IDE programming Step-by-Step
HTML-код
- Опубликовано: 5 сен 2024
- Learn how to program the STM32 board (STM32F103C6T6 or STM32F103C8T6) with an ST-LINK in the Arduino IDE. This is a quick but detailed step-by-step tutorial.
ST-LINK [1.48$, free delivery over 10$, in 02/2024]:
s.click.aliexp...
STM32 [from 1.37$]:
s.click.aliexp...
-- NEW ! --
Discover my newsletter to receive a quality electronic component at the lowest price selected each week.
mailchi.mp/b85...
----
Folder to DOWNLOAD:
drive.google.c...
If you have any problems, don't hesitate to post a comment!
Hi ! I've recently created a newsletter where you can discover quality electronic components at the lowest prices.
mailchi.mp/b85488fec2b3/hwbvaocscz
After spending a whole day look'n at different RUclipsrs, But this channel was the easiest and quickest. Thanks a million!
Hello everything else works fine for me except in the arduino ide i have the ports option under tools disabled so it says no st link detected. Can you guide me on how to proceed.
In fact, I don't see any port appearing when I connect the stlink. Just pretend it's normal, and the download should normally work.
Be careful too, the connections are a bit fragile.
Hello I'm already in the arduino programming stage but the port is not detected can you help me
It is normal for the port not to be detected, and upload should work if you are not connected to another port.
If you're sure it's not working, I suggest you try these 3 things:
- Check for faulty connections/wires
- Try connecting to another computer
- Download the latest stlink drivers from the st website.
@@ucexperiments i managed to program but to display the value on the serial monitor port it must be read first, do you have any suggestions for this problem
With a stlink, it seems to me that this is very complicated, if not impossible.
With a USB cable, however, the port should be detected. I encourage you to try this and watch my other video.