@@loafandjug321 Lol. I’m the second Shafer and I’m a woman. Lol No, I haven’t run this kinda machine or any kind. Lol. Oh, wait does a vacuum count? 😊👍
@@loafandjug321 What are you talking about? I think I was admiring a machine! What does freedom and liberty have to do with taking down bushes and weeds? 🤔
Your equipment setup is spot on. A/C and an enclosed cab... why? Heat, humidity and BUGS; like those flies you encountered a few videos ago! Well done sir!
Looks good brother. It looks like it went faster than the first time you cut it. A second person on the U-55 with the XCT-5 would be handy for the corners, tree thinning and on the borders, if the customer wanted it and pay for it.
Thanks Jeff! Yeah it definitely went faster this time around LOL! Yeah it would be nice to get the U55 with the brush cutter over there but for stuff like this they just want to minimum done to keep the lot in compliance with local ordinances and that's it pretty much.
Still don't have that guard on the hydraulic motor. Did the servicing, replaced the rear idler, and put on a new track but didn't have two minutes more to put the cover guard back on the hydraulic motor. When you break a fitting out of the side of the thing and have to buy a new hydraulic motor you'll wish you'd had time to put it back on. I'm giving you a hard time but it does need it just in case. This is a cake walk compared to the way this lot was the first time you cut it. Looks good. Ventrac tractors are nice pieces of equipment with lots of optional attachments. I've wanted one for a long time. Have the vacationers showed up in droves down there in Horry county yet? Stay well. -Wil 👍
Could you show us the controls you use when using this mowers sometime and how you switch between high and low flow? If you run it on high flow, you could use a lower engine RPM and save more fuel and less ware and tear on the machine. You should consider getting one of those flashing orange beacons on the top of your skid steer and excavator so when you do have to have your machine on the road, people can see you better. Especially with everyone not paying attention anymore.
Hey Kevin, check out this vid, I put a little tutorial on the cab and controls in this vid so check it out! Thanks! ruclips.net/video/3PmEsyzs__o/видео.html
Just wondering why you don't turn around and cut another line at the end of the long straight cuts instead of backing up cutting nothing. Seems like you'd get more cut.
Yeah we have a lot of sandy loam. I don't offer it because most (if not all) of my clients don't care enough to pay for that, they just want the lots cut and that's it. Thanks James!
I agree with Scott. Why do you back all the way down a row instead of cutting nothing? I know sometimes you say you are making sure everything is cut and to chop sticks up finer. But, you can see there is nothing left on these rows.
Tou cant see it all in the vid I've ran one of these alot and when just going forward it just lays some over and when u back up it cuts it all real good plus when you back up you are mulching it it up real fine if he where to just run it like say a regular lawnmower the finish wouldn't be as fine cut and you'd hv stuff still layed over uncut him backing up insures the customer gets a perfect cut
I explain that at the end of the vid, I backed up all the way because I don't want to cut toward the road for safety reasons. The cutter could throw something and I don't want that going toward the road.
I have noticed that you do Not cut the grass etc when you are in reverse. Why don’t you keep your blade Down to cut as you go in reverse. Aren’t you wasting one ‘trip’ of mowing. And perhaps loosing time too. 🤠
I do not understand why you keep going back ward and forward in cutting when you could just keep going forward. Just seems like you are afraid to use the full potential of this powerful cutting machine. Terry
Pulling back with the front of the deck a bit down pulls the downed material back into the blades with the teeth on the bottom of the main plate and shreds it up a lot more. Makes the finished cut look a LOT better. Plus, it helps clear the material that starts to clog the deck after a bit. You'll notice that this mower has no discharge chute, it's grinding everything up inside. It's a brush cutter, not a mower. So by pulling backwards, you grind that material fine and eject it to leave room for the blades. :) Plus, the mower will eject objects to the front, especially the front-right since the blades are spinning from left to right as viewed from the operator's position, so you have to keep an eye on the direction you're facing. Otherwise, you could throw chunks and high speed into one of those neighboring houses or out into the street and injure someone or damage things.
I don't know anything about these machines. I'm just guessing what I am about to ask. Does this have any kind of hydro system return system and cooling system and recirculating system for continuous use of the fluid?
Yes the hydraulic lines are in-flow and out-flow and the smaller third line is a pressure relief line that returns excess hydraulic oil under pressure back to the hydraulic tank on the machine.
Interesting how many of those MTL cutters are on RUclips. I tried to buy one myself but the company took my dough then canceled my order just befit was time for it to ship. Kept part of my money and now don’t answer my calls. Guess you mush have better luck than I. Now I have a high quality Diamond Mower. I think MTL did me a big favor by canceling my order. There is no comparison in the quality.
is that a pallet for some kind of a fence or border on the neighbors property. thats wierd, people use pallets for way to many things and think its cool. i guess im cheap and if you don't have to pay for it, i like it.
LOL yeah it did sound like it didn't it LOL! I think it was the tracks going around the undercarriage tho, if I heard that sound in real life I'd be out of there LOL!
Lol.... I thought I was hearing things with my headphones on... 😳 I knew that sound from SOME wheres!! 😅 I was waiting to hear, "Get to the choppa".... LOL!! 🤣🤣
looks like you left a lot around the edges that should have been cut. even with the property line I am sure the neighbors would not care getting that stuff of the edge of there property. too me it looks like too me the job was just half done. you could have done a lot more around the edges for sure.
I try not to cut stuff on other people's property. I know they probably wouldn't mind but I try not to presume what other people want or don't want when cutting, you cut something you shouldn't and then someone gets mad and it's just not worth making that kind of mistake. But I understand the thinking.
MY FRIEND, HOW YOU WORK WRONG, FATHER OF HEAVEN !!!! GIVING REVERSE, WITHOUT CUTTING ANYTHING, IS THE END OF TIMES....WARD OF TIME AND FUEL WAST. HOW CAN ???? I SEE THIS IN ALL THE VIDEOS.... IN THIS FOR EXAMPLE, IT WOULD BE ENOUGH TO GO WALKING IN A STRAIGHT LINE, MAKING TURNS, CIRCLES, AT LAST, AND ALWAYS CUTTING. ....NOW THIS ONE GOES AND COMES, FORWARD AND BACKWARDS, FOR LOVE....ALL WRONG. RETHINK YOUR LIFE AND THE WAY YOU WORK. DON'T WASTE SO MUCH TIME, SAVE FUEL. ABS
why don't you use the full capassety of the cutting machine. so as I can here you use 1/3 off the full power of the mower . and than the use lus backwards driving without mowing, sorry that's complete use lus. I don this work more than 35 years and never like you do it. sorry but I don't understand it. greetings from Belgium
FALA GALERA.....MEU AMIGO, COMO VOCÊ TRABALHA ERRADO, PAI DO CÉU !!!! DAR MARCHA RÉ, SEM CORTAR NADA, É O FIM DOS TEMPOS....PERDA DE TEMPO E GASTO DE COMBUSTÍVEL. COMO PODE ???? VEJO ISTO EM TODOS OS VÍDEOS....NESTE POR EXEMPLO, BASTARIA IR ANDANDO EM LINHA RETA, FAZENDO VOLTAS, CÍRCULOS, ENFIM, E SEMPRE CORTANDO....E NO FINAL, FARIA ACERTOS, ARREMATES NOS CANTOS, QUE FICARAM SEM CORTA....AGORA, ESSE VAI E VEM, PRA FRENTE E PARA TRÁS, PELO AMOR....TUDO ERRADO. REPENSE SUA VIDA E SUA FORMA DE TRABALHAR. NÃO PERCA TANTO TEMPO, ECONOMIZE COMBUSTÍVEL. ABS
this is a very simple job, yet you are making it triple difficult. You are WASTING time backing all the way back with your blade in the air!! If you do this for a living, mowing like you are mowing here you are eating up any profit you might be making, if any...
With respect, I completely explained why I was backing all the way up at the end of the vid, you have to watch the vid to the end typically to get the context of why I do things the way I do. And the reason I back up is that if I were to turn around and cut toward the road that is a safety hazard where the cutter could throw something into the road and hit a car or something of the like. I am not wasting time, I am being safe, and there is a big difference. I would suggest watching the entire vid next time.
I feel disappointed of what you did..It's not clean enough..Why didn't you lift it up and going backward at least two times to clean the mess down there...And why did you have to lift up the front part when you went backward?..
You're wasting fuel going backwards and forwards, just go forwards all the time and do twice as much mowing instead of using your machine like a hoover.... Just saying....
Cutting forward but backward without cutting, that's an inefficient job, wasting time and fuel. You have to be focused, every movement of the machine has to be 100 per cent useful. Before take a jobs check first your blade are sharps.
I LOVE this machine! It destroys with NO PROBLEM!! Fast and clean and looking good! 💯👍
Yeah I love it too! Its been a good machine for sure! Thank you for watching and commenting!
Lmao, destroys 2 ft high weeds. You've obviously never ran a bush hog.
@@loafandjug321 Lol. I’m the second Shafer and I’m a woman. Lol No, I haven’t run this kinda machine or any kind. Lol. Oh, wait does a vacuum count? 😊👍
@@shafersshafers5231 You don’t understand because you don’t understand liberty. You don’t understand freedom.
@@loafandjug321 What are you talking about? I think I was admiring a machine! What does freedom and liberty have to do with taking down bushes and weeds? 🤔
Thanks friends for sharing
Sure thing, Thank you for watching and commenting!
Proper bush management is important in all aspects of life. Ok sorry couldn't resist. Great video as always!
I just enjoy watching this channel. It’s relaxing for me n stress less lol
Cool video, I can watch and do this all day long. It's alot of fun. Take care 👍🇺🇸
Awesome Gary! Glad you enjoyed the content! Thank you for watching and commenting!
That machine is so awesome. Great job.
Your equipment setup is spot on. A/C and an enclosed cab... why? Heat, humidity and BUGS; like those flies you encountered a few videos ago! Well done sir!
That looks way too much fun to be called your work. Keep them coming.😝👏👍
I agree Terry and it would and get the job completed sooner.
Great job! Helps to have the right tools!
I like the old fashioned way of weeding with adequate tools...!
How do you mean old fashioned? Doing it with a scythe or sickle? The hard way you mean?
Thing is he does it that way because of his own safety like snakes and other insects and animals
LOL I like the new fashioned way, which is sitting in a air conditioned machine away from the heat and bugs!
I mean: no fancy mowing devices
Some of those places looked like they needed the mulcher; pretty thick!
i watched you? 1st time u mowed this yard... now? u have new subscriber!! ^5
Good job
that lil XCT? is a Beast! Nice machine
Hi there another great video mate keep them coming
Will do Andy, glad you enjoyed watching! Thanks!
Looks Great!
Thanks Gary!
Another job down and looking forward to the next....
Looks good brother. It looks like it went faster than the first time you cut it. A second person on the U-55 with the XCT-5 would be handy for the corners, tree thinning and on the borders, if the customer wanted it and pay for it.
Thanks Jeff! Yeah it definitely went faster this time around LOL! Yeah it would be nice to get the U55 with the brush cutter over there but for stuff like this they just want to minimum done to keep the lot in compliance with local ordinances and that's it pretty much.
SOMEONE WAS SO NICE TO DROP OFF A BALD TIRE FOR YOU IN THE HIGH BRUSH
Niceeee job
Thanks, Davin!
Thank you for watching!
When you put your cover back on, try mounting it on rubber to absorb the vibration and welds should hold up better.
I'll see if I can find some! Thanks Bradford!
Still don't have that guard on the hydraulic motor. Did the servicing, replaced the rear idler, and put on a new track but didn't have two minutes more to put the cover guard back on the hydraulic motor. When you break a fitting out of the side of the thing and have to buy a new hydraulic motor you'll wish you'd had time to put it back on. I'm giving you a hard time but it does need it just in case. This is a cake walk compared to the way this lot was the first time you cut it. Looks good. Ventrac tractors are nice pieces of equipment with lots of optional attachments. I've wanted one for a long time. Have the vacationers showed up in droves down there in Horry county yet? Stay well. -Wil 👍
Thanks William! I know I am playing with fire with that cover and I agree I need to get it back on! And yes, the vacationers are here in force LOL!
Muy buenos tus vídeos saludos abrazo grande desde Argentina 😊👍
Thanks Eduardo!
Mantap kawan makasih sudah berba
My brush mower has bi-directional blades so I can run it in both directions in order to spit debris out either side.
Could you show us the controls you use when using this mowers sometime and how you switch between high and low flow? If you run it on high flow, you could use a lower engine RPM and save more fuel and less ware and tear on the machine. You should consider getting one of those flashing orange beacons on the top of your skid steer and excavator so when you do have to have your machine on the road, people can see you better. Especially with everyone not paying attention anymore.
Hey Kevin, check out this vid, I put a little tutorial on the cab and controls in this vid so check it out! Thanks! ruclips.net/video/3PmEsyzs__o/видео.html
Just wondering why you don't turn around and cut another line at the end of the long straight cuts instead of backing up cutting nothing. Seems like you'd get more cut.
He cuts like that so he doesn’t throw debris out on the street or sidewalk, for safety of passerby’s.
He's mulching it up really good when he does that
Yeah I explained that at the end of the vid, but yeah Jeff hit it right on the head, I don't want to cut towards the street for safety reasons.
I was just about to ask this same question. Makes sense.
Some how I was unsubbed but back again😆 great watch.🥰👍
Air conditioner security cages…. Must be one of the nicer neighbors in MB? Looks good brother! 👍🏼
LOL this is definitely not one of the nicer neighborhoods in MB LOL! Glad you enjoyed watching brother!
Most of the soil around your area is sandy loam, right? Do you ever offer to box blade with a ripper, so you can get the lots flattened out a bit?
Yeah we have a lot of sandy loam. I don't offer it because most (if not all) of my clients don't care enough to pay for that, they just want the lots cut and that's it. Thanks James!
I agree with Scott. Why do you back all the way down a row instead of cutting nothing? I know sometimes you say you are making sure everything is cut and to chop sticks up finer. But, you can see there is nothing left on these rows.
Tou cant see it all in the vid I've ran one of these alot and when just going forward it just lays some over and when u back up it cuts it all real good plus when you back up you are mulching it it up real fine if he where to just run it like say a regular lawnmower the finish wouldn't be as fine cut and you'd hv stuff still layed over uncut him backing up insures the customer gets a perfect cut
I explain that at the end of the vid, I backed up all the way because I don't want to cut toward the road for safety reasons. The cutter could throw something and I don't want that going toward the road.
I have noticed that you do Not cut the grass etc when you are in reverse. Why don’t you keep your blade Down to cut as you go in reverse. Aren’t you wasting one ‘trip’ of mowing. And perhaps loosing time too. 🤠
In the fall take another 5 feet off that corner jungle and eventually it will be gone, bringing the neighborhood value up each job....
If I lived next to that property , I would want him to cut to the overgrown down next to my yard. Even if he had to come on my property. 👍
I would definitely do it but I didn't have permission from the neighbors tho
Hopefully Ventrac will reach out once you get more subscribers for a test loan.
That would be nice Carl! Maybe they will!
That Is not a c lug on the left side . Question what ya charge to do that lot ?
Confused, what is an 11,000 OMG lot?
I'm curious as to why they don't have you bulldoze the lot and then maintain it.
Can you switch it to high speed from the cab while mowing?
Great question! Yes I can Danielle! Thank you for watching and commenting!
22-23 gallons a minute? How do you carry enough fuel with you. Maybe I am not understanding how that works.
I do not understand why you keep going back ward and forward in cutting when you could just keep going forward. Just seems like you are afraid to use the full potential of this powerful cutting machine. Terry
Pulling back with the front of the deck a bit down pulls the downed material back into the blades with the teeth on the bottom of the main plate and shreds it up a lot more. Makes the finished cut look a LOT better. Plus, it helps clear the material that starts to clog the deck after a bit. You'll notice that this mower has no discharge chute, it's grinding everything up inside. It's a brush cutter, not a mower. So by pulling backwards, you grind that material fine and eject it to leave room for the blades. :)
Plus, the mower will eject objects to the front, especially the front-right since the blades are spinning from left to right as viewed from the operator's position, so you have to keep an eye on the direction you're facing. Otherwise, you could throw chunks and high speed into one of those neighboring houses or out into the street and injure someone or damage things.
I bet that's what your wife says about you. She's not satisfied because your to afraid to use your full potential.
Thank you for that information. I didn't know all that. Thank you for helping me learn. 👍
Do you do this lot just for fun or is there a client who calls you back once a year to do this?
✌ 👍
I don't know anything about these machines. I'm just guessing what I am about to ask. Does this have any kind of hydro system return system and cooling system and recirculating system for continuous use of the fluid?
Yes the hydraulic lines are in-flow and out-flow and the smaller third line is a pressure relief line that returns excess hydraulic oil under pressure back to the hydraulic tank on the machine.
Interesting how many of those MTL cutters are on RUclips. I tried to buy one myself but the company took my dough then canceled my order just befit was time for it to ship. Kept part of my money and now don’t answer my calls. Guess you mush have better luck than I. Now I have a high quality Diamond Mower. I think MTL did me a big favor by canceling my order. There is no comparison in the quality.
Oh one more thing do you use cameras on a project?
Well I use GoPro's to film this so I suppose so...
I don't understand why you waste going back without mowing! I'd turn around and mow back!
What is the normal fee for a job like this?
Isn’t this the same as using a tractor and bush hog? Really wanting to know the difference.
This is slower than using a tractor. I can bush hog 2 acres with a Ford 3930 in less tine than this video..
Le huye al monte, y se va al pastito
how do you make any money to over come your 50 percent wasted movement???
Why not turn around rather than backing all the way back?
Reckon how many times you reversed doing that lot? 😈
Watch out for snakes
Always Melissa! Thank you for watching and commenting!
is that a pallet for some kind of a fence or border on the neighbors property. thats wierd, people use pallets for way to many things and think its cool. i guess im cheap and if you don't have to pay for it, i like it.
LOL I have no clue what that was Jace!
Is it just me, or did I hear the Predator sound at 14:03 to 14:09 ? 🤔🤔
I swear I heard it... 😅
You heard it lol we should name that cutter "predator lol
LOL yeah it did sound like it didn't it LOL! I think it was the tracks going around the undercarriage tho, if I heard that sound in real life I'd be out of there LOL!
@@idigit4967 haha right and hey you operate that thing so smoothly great work my friend
Lol.... I thought I was hearing things with my headphones on... 😳 I knew that sound from SOME wheres!! 😅
I was waiting to hear, "Get to the choppa".... LOL!! 🤣🤣
looks like you left a lot around the edges that should have been cut. even with the property line I am sure the neighbors would not care getting that stuff of the edge of there property. too me it looks like too me the job was just half done. you could have done a lot more around the edges for sure.
I try not to cut stuff on other people's property. I know they probably wouldn't mind but I try not to presume what other people want or don't want when cutting, you cut something you shouldn't and then someone gets mad and it's just not worth making that kind of mistake. But I understand the thinking.
А почему не сделать перевод на русский язык ваши коменты.
Ok but alittle repetitive on short stuff,would like to see more 12 to 16 ft
MY FRIEND, HOW YOU WORK WRONG, FATHER OF HEAVEN !!!! GIVING REVERSE, WITHOUT CUTTING ANYTHING, IS THE END OF TIMES....WARD OF TIME AND FUEL WAST. HOW CAN ????
I SEE THIS IN ALL THE VIDEOS.... IN THIS FOR EXAMPLE, IT WOULD BE ENOUGH TO GO WALKING IN A STRAIGHT LINE, MAKING TURNS, CIRCLES, AT LAST, AND ALWAYS CUTTING. ....NOW THIS ONE GOES AND COMES, FORWARD AND BACKWARDS, FOR LOVE....ALL WRONG. RETHINK YOUR LIFE AND THE WAY YOU WORK. DON'T WASTE SO MUCH TIME, SAVE FUEL. ABS
why don't you use the full capassety of the cutting machine. so as I can here you use 1/3 off the full power of the mower . and than the use lus backwards driving without mowing, sorry that's complete use lus. I don this work more than 35 years and never like you do it. sorry but I don't understand it. greetings from Belgium
FALA GALERA.....MEU AMIGO, COMO VOCÊ TRABALHA ERRADO, PAI DO CÉU !!!! DAR MARCHA RÉ, SEM CORTAR NADA, É O FIM DOS TEMPOS....PERDA DE TEMPO E GASTO DE COMBUSTÍVEL. COMO PODE ????
VEJO ISTO EM TODOS OS VÍDEOS....NESTE POR EXEMPLO, BASTARIA IR ANDANDO EM LINHA RETA, FAZENDO VOLTAS, CÍRCULOS, ENFIM, E SEMPRE CORTANDO....E NO FINAL, FARIA ACERTOS, ARREMATES NOS CANTOS, QUE FICARAM SEM CORTA....AGORA, ESSE VAI E VEM, PRA FRENTE E PARA TRÁS, PELO AMOR....TUDO ERRADO. REPENSE SUA VIDA E SUA FORMA DE TRABALHAR. NÃO PERCA TANTO TEMPO, ECONOMIZE COMBUSTÍVEL. ABS
(LOL)i hope? there?wasnt sum homeless person sayin? DAMM!!? fkin crap!! there goes my house :lol:
Why don't you turn your mower around so you can do another strip of weeds ? Your wasting time going in reverse and gas .
this is a very simple job, yet you are making it triple difficult. You are WASTING time backing all the way back with your blade in the air!! If you do this for a living, mowing like you are mowing here you are eating up any profit you might be making, if any...
With respect, I completely explained why I was backing all the way up at the end of the vid, you have to watch the vid to the end typically to get the context of why I do things the way I do. And the reason I back up is that if I were to turn around and cut toward the road that is a safety hazard where the cutter could throw something into the road and hit a car or something of the like. I am not wasting time, I am being safe, and there is a big difference. I would suggest watching the entire vid next time.
Why don’t you turn around
Why do you back
I explained that at the end, its because I don't want to cut towards to road for safety reasons.
I feel disappointed of what you did..It's not clean enough..Why didn't you lift it up and going backward at least two times to clean the mess down there...And why did you have to lift up the front part when you went backward?..
I'm sorry you felt disappointed, I'll try to do better next time but the owner was happy so I think it's ok myself.
You're wasting fuel going backwards and forwards, just go forwards all the time and do twice as much mowing instead of using your machine like a hoover.... Just saying....
Cutting forward but backward without cutting, that's an inefficient job, wasting time and fuel. You have to be focused, every movement of the machine has to be 100 per cent useful. Before take a jobs check first your blade are sharps.
Why cant you do it real finish this is just half way its not nice at all
ഗ
. a
Esto no vale para nada
Boring....