It reminds me of that too. A glamorous gathering, where the women are dressed in black with rhinestones and silk lace and sequins lol. And the men are in tuxedos. LOL Thanks Dawn🥰♥️
I reordered a set of these coaster molds from Amazon, identical order, but the second batch were deeper than the first. I have to use the right ones together, and limits me to four the same when I pour. I like how these turned out. Elegant.
Isn’t that crazy they come that way? Go figure. I got my second set and they were the same as the first so now I have four for my set👍 Thank you Margaret😊
Those are so beautiful. I can never get mine to bloom like that. I know I'm new at resin but I don't know why mine never look anything like that. Help!
Letting your resin set for about five minutes before you put your colors in helps it not spread so much. And then you don’t have to hit it much at all with the heat gun. Just a little tiny bit. That might help because that was my big problem in the beginning. Thank you Cecilia
Those are stunning Sherri! Love the glitter! Gonna get down to 20 degrees here tonight 🙄 Had a little dusting of snow again last night and it’s not November yet! Stay safe sweet lady 🥰
Hi Sherri! First time on your channel! I do love these! They came out totally awesome! Thank you for your great tutorial! Wow! Yes they are gorgeous! I subscribed! Looking forward to watch more of your videos! Yaaayyy! 🌟❇❇❇❇❇😊😍🐇💖💕
I use acetone or 91% rubbing alcohol. Dump out as much resin as you can then shake the alcohol in the bottle real real good and soak the tips in some alcohol👍 Thank you ☺️
Yes, I should have mentioned that. I usually tape off the bottom. And put a topcoat. I have an extra heat resistant and scratch resistant resin to protect it. Otherwise the marker would just come off when washed after a few times. And if I’m not going to pour an extra coat of protection I will simply dip my finger in a little bit of resin and go around the sides very lightly to protect the marker. Thank you Carol👍
@@sherrislife2046 thank you. Do you mind sharing what heat resistance resin you use? I usually make tumblers so I am familiar with resin, just starting to get into molds and coasters. Love your work BTW.
Hi Sherri. I'm sorrry I have another question for you. What do you use to sand any mistakes. I tried using that wet sandpaper, but it takes forever. I also have a dremel and I used that and it works good at getting the sanding done but it then leaves white where you sanded. I have learned one thing...don't make mistakes LOL. What do you use?
It all depends upon how bad it is. I will use flint polish and then buff the heck out of it. But if it’s a real bad one I will cover the bottom with some tape or something and pour a topcoat of resin on them. Then I just Peel off the tape on the bottom and that’s it. Many times a topcoat will correct everything. Thank you
These are gorgeous 😍. You've definitely nailed the flower technique😀. The black background with the glitter was a very good choice ( in my opinion ), really makes the flowers pop. Well done 😀. Those moulds are for agate type coasters, so I wonder if two are meant to be thicker maybe, just because in real life they wouldn't be the same exact thickness? Just a thought. I have several sets of similar moulds and a couple of mine are also slightly thicker. Could just be bad design also as cheaper moulds 😅. Going to email you later with some pics. You can be honest, I won't be offended.
Great video Sherri, I think I may do those colours for a set for my brother. I like the 3d effect and pattern for the floral look. Can I ask a couple of questions please? 1.You had you white resin in little bottle ( I have some) but how do you clean them out, or do you just chuck them. Cleaning out tubs etc is such a messy job! 2. Do you know how to stop the centre diamonte, or any other embellishment, from shifting after you've put them to one side to cure? Any advice would be helpful, thank you.
I think they would be awesome for your brother. Great colors. Having the place where you let them cure be completely level is very very important of course. My problem is always carrying it over to that level area than they shift on me. I will fix it and then somehow they always go back LOL but just not moving around a lot and 100% level area will keep them from moving. It’s not that hard to clean up the bottles as long as you drain out as much resin as possible as fast as possible. And as long as you use 91% alcohol and shake real good. I just fill the bottle up halfway and shake and then I dumped it out and fill it back up again halfway and shake. That usually does it. I soak the caps in a cup of alcohol and stir for a few minutes. The 50% alcohol doesn’t clean it that well and I have let it sit just too long before so I have chucked a few bottles. I usually dump the rest of the resin out into something like another mold to just make something out of it. But do it quick.. Unless you’re good with a piping bag. I’m just not good with those things. Thank you 👍
@@sherrislife2046 thanks Sherri, I'm married to a joiner/builder so I got him to double check the levels of my worktop I use so thats sorted after a few mistakes. I've got some of that Alcohol but not sure what strength it is but ill ask my brother as he gave me some. Ive been a bit scared of using it TBH. But ill have another go.. ive got 2 MDF stacking shelves either from HOCHANDA or CREATE AND craft and they are working out fine for drying projects . Ill try what you say about items moving around, fingers crossed. So on with the plot and hope I get all my projects done in time for Christmas.
Casting resin is thinner. It’s meant for molds. This flower coaster is done with pro marine tabletop resin. It’s a thick resin. I normally would use casting resin for my coasters but to do this 3-D flower you need to use the thicker resin. It spreads too much if you use casting resin. So just for this technique I use the thick resin. But any other time I will use casting resin. Thank you 😊
@@sherrislife2046 oooh thanks a lot for this explanation, I didn’t even know that there are different kinds of resin 🤭 I really appreciate you took time to answer me 🥰
Oh well the paste is what does it. That paste is what makes it flare. So no powder will not work. Castin craft or any type of white pigment paste. And remember very very little.
@@dalialovesdoggies4361 www.amazon.com/Environmental-Technology-1-Ounce-Casting-Pigment/dp/B001685QIG/ref=mp_s_a_1_1?crid=2XUPIVK6WBBWD&keywords=castin+craft+white&qid=1678739381&sprefix=castin+cra%2Caps%2C166&sr=8-1 Like one or two drops You can add it to other colors of mica powder if you want, but only a little bit
@@dalialovesdoggies4361 That makes it flare like flower petals With these coasters I used four drops to my resin, and then the colored alcohol ink. I didn’t show mixing it, but I explained a little starting at 3:48 seconds of this video
I actually bought that Flitz polish and it works. Just needs a little elbow grease and you are so right they do disappear. Thank you very much Nickolas👍
Oh, if there is EVER an issue with any with Amazon, call or chat with them and they'll make it right. They refunded me for a resin purchase I had an allergic reaction to!
@@sherrislife2046 Thank You Sherri. As soon as I get my money from the bank (long story short...someone compromised my debit card #. They didn't get my card, just my number) I will put a donation in. One thing I don't understand is when I order something online, I always use my paypal. So I just don't understand how that happened. I feel so damn violated. So you know now I have to get a new card and all that crap... Anyway, Sherri you did a resin pour a bit ago and you used that beautiful liquid gold leaf and you used liquitex white acrylic ink. I waited so I could order those items so I could copy you exact LOL and now I'm ready but I can't find that video. Can you help me? Hopefully you remember the one I am talking about... Thanks Sherri!!!
@@sandrarodgers5015 First I’m going to attach the links to any of the videos that I use the liquid leaf on. Hopefully this will help. ruclips.net/video/ykJPOaKQhOQ/видео.html ruclips.net/video/rnCc1GtdlX4/видео.html ruclips.net/video/3QDC_7gmuVc/видео.html I will keep looking for more. Remember how they had all those gas tank scammers around for a while? Well I used a gas tank that one of those scammers we’re in and they drained my entire checking account. I have had to change my card so many times. Just to be honest with you I think it’s sometimes a good idea to change our cards every once in a while anyway. The bank took care of everything that the scammer took so I was very thankful of that. But I just completely know how violated you feel. No hurry for anything I am just fine. I hope you are doing good also.
@@sherrislife2046 Hi Sherri. I found the coasters that you did using the gold leaf, liquid gold and the white acrylic ink. They are so beautiful. I am going to do those tomorrow and hope they turn out as nice as yous did. Anyway, I had to wait to get resin shipped to me. Sometimes it takes a little time. Thanks for all and take care!! Thanks Sherri! Sandy
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
absolutely adore these, details are awesome, and the colors are wonderful.
Thank you very much😊
These are some of the best I've seen, you did a great job.
Wow, thank you very much👍
That's very elegant Sherry I like that
Thank you ☺️
I love the glitter background They’re so beautiful
Thank you so much 😊
Using a glitter background is always a plus. 👍🤩
Wow wow and wow, stunning.
Thank you so much 😊
Wow so very pretty girl I love them 💙💜💙
Thank you 😊
They’re absolutely beautiful
Those are really pretty.
Thank you 😊
I think they’re just beautiful!
absolutely fabulous , a viewer from south wales uk
They remind me of white and silver poinsettias. Very elegant, love them.
Thank you ♥️
These are absolutely phenomenal. The shimmer of the petals is gorgeous. And the glitter is a perfect color and beautiful as it peaks through petals. 💜
Thank you ♥️
New subscriber, beautiful floral coasters.
Oh those are SO pretty! I have to try your technique.
I think they are beautiful.
Thank you 😊
They are very beautiful
Thank you Tina😊
I agree, I think these are absolutely beautiful I I really appreciate you taking the time to walk through each step on how these were created.
Thank you 😊
These are gorgeous!!
Very pretty Sherri.👍👍
Thank you 😊
@@sherrislife2046 tried watching your new vid but it won't play?
@@littlelulu4107
What new video? My appreciation painting video? Hmm 🤔
It seems to be working. Maybe pull out and then go back in.👍
Gold around the edges where you put the silver pen marker would make the dark edges pop.
Oh yes, that is so true.
Great coasters
Thank you 😊
Turned out nice regardless the issues you claim were a problem
They make me think of a wedding or some big event where everyone is all dressed up and glamorous. They really are beautiful!!
Thank you Sherri.
It reminds me of that too.
A glamorous gathering, where the women are dressed in black with rhinestones and silk lace and sequins lol. And the men are in tuxedos. LOL
Thanks Dawn🥰♥️
wow, those are amazing.
Thee stunning 🤩
Gorgeous, stunning, elegant! I could go on and on! I LOVE these colors!
Thank you ☺️
You are the youtube Queen of coasters. Thankyou 👍❤️
Aww, thanks Bonnie🥰
Gorgeous 😍
Thank you 😊
You have been on a roll Sherri! Those coasters are gorgeous.
Thank you ♥️
At the 10 minute mark they looked like chocolate cup cakes
with sprinkles on top. LOL!
They came out great!
James 😁
Lol
Yes they sure did LOL
Good enough to eat LOL
Thank You James
Beautifully done...
Impressive 😍
Thank you 😊
Wow really gorgeous Sherri 💖👏🥰
Thank you 🥰
That is beautiful! I love the color!💜
Thank you 😊
OMG OMG OMG. I absolutely LOVE these😍😍😍😍. Going to try this tomorrow 😃. ❤️❤️❤️❤️❤️❤️❤️❤️
I really loved the set also. Thank you Renee🥰
Love the gaps with the glitter. They look beautiful.
Thank you ♥️
Gorgeous
Thank you ♥️
So pretty Sherri love these! So elegant🤗
Thanks Lori😊
I love the background. The colors are beautiful.
Thank you ♥️
Love it.
Thank you 😊
Absolutely stunning!!
Thank you ☺️
Very pretty
Gorgeous 😁
Thank you 😊
I love it Sherri, so pretty xx
Thank you 😊
Winner winner chicken dinner !! 😍😍😍
Thank you 😊
Love these
💕lovely💕 from the UK💕
Thank you 😊
Beautiful layers that came through. I love your center buttons!
Soo beautiful, I really love these ones , awesome job
Thank you ♥️
My pleasure !
Love these!!!!!
Thank you ☺️
I absolutely love them❤️❤️
Thank you very much 💜
Love them 😍
Thank you ☺️
I'm new today and am totally in love💘 with these. Your color choice was PERFECT!! Classy, elegant ect... can't wait to watch more of your video's.
Thank you for being here.
It’s nice to meet you also.😊👍
Hi, I watch n watch this video. I love your work! I will get my nerve up soon n try to follow your tutorial. 🌹😊🙏🏻
Thank you 😊
Beautifies. Love the car and design ❤️
Thank you 💜
I reordered a set of these coaster molds from Amazon, identical order, but the second batch were deeper than the first. I have to use the right ones together, and limits me to four the same when I pour. I like how these turned out. Elegant.
Isn’t that crazy they come that way? Go figure. I got my second set and they were the same as the first so now I have four for my set👍
Thank you Margaret😊
So beautiful ... Are the coaster 5 inches deep
No, only about 1/3 deep. They are about 4 or 5 round.
Thank you
Those are so beautiful. I can never get mine to bloom like that. I know I'm new at resin but I don't know why mine never look anything like that. Help!
Letting your resin set for about five minutes before you put your colors in helps it not spread so much. And then you don’t have to hit it much at all with the heat gun. Just a little tiny bit.
That might help because that was my big problem in the beginning.
Thank you Cecilia
Beautiful!
Thanks so much Janese🥰
Those are stunning Sherri! Love the glitter! Gonna get down to 20 degrees here tonight 🙄 Had a little dusting of snow again last night and it’s not November yet! Stay safe sweet lady 🥰
Brr🥶 lol
Thanks Becky♥️
Hi Sherri! First time on your channel! I do love these! They came out totally awesome! Thank you for your great tutorial! Wow! Yes they are gorgeous! I subscribed! Looking forward to watch more of your videos! Yaaayyy! 🌟❇❇❇❇❇😊😍🐇💖💕
Thank you so much for watching.
It’s totally my pleasure.
Thank you 😊
Really gorgeous coasters. Want to have a go at them. How do you clean the little plastic bottles after use???
I use acetone or 91% rubbing alcohol. Dump out as much resin as you can then shake the alcohol in the bottle real real good and soak the tips in some alcohol👍
Thank you ☺️
Thank you for your reply. Will do as you say. Cant wait to try your technique. Have a nice day.
When you put the silver marker around the edges, do you have to seal it with anything?
Yes, I should have mentioned that. I usually tape off the bottom. And put a topcoat. I have an extra heat resistant and scratch resistant resin to protect it. Otherwise the marker would just come off when washed after a few times.
And if I’m not going to pour an extra coat of protection I will simply dip my finger in a little bit of resin and go around the sides very lightly to protect the marker.
Thank you Carol👍
@@sherrislife2046 thank you. Do you mind sharing what heat resistance resin you use? I usually make tumblers so I am familiar with resin, just starting to get into molds and coasters. Love your work BTW.
Perfection
Thank you ♥️
Hi Sherri. I'm sorrry I have another question for you. What do you use to sand any mistakes. I tried using that wet sandpaper, but it takes forever. I also have a dremel and I used that and it works good at getting the sanding done but it then leaves white where you sanded. I have learned one thing...don't make mistakes LOL. What do you use?
It all depends upon how bad it is.
I will use flint polish and then buff the heck out of it. But if it’s a real bad one I will cover the bottom with some tape or something and pour a topcoat of resin on them. Then I just Peel off the tape on the bottom and that’s it. Many times a topcoat will correct everything.
Thank you
Hi, what kind of marker did you use for the outside? They are so beautiful!!
It’s one of those Krylon leafing markers.. I will attach a link. Thank you very much😊
www.amazon.com/Krylon-9902-Leafing-Pen-Silver/dp/B00FM6072S
These are gorgeous 😍. You've definitely nailed the flower technique😀. The black background with the glitter was a very good choice ( in my opinion ), really makes the flowers pop. Well done 😀. Those moulds are for agate type coasters, so I wonder if two are meant to be thicker maybe, just because in real life they wouldn't be the same exact thickness? Just a thought. I have several sets of similar moulds and a couple of mine are also slightly thicker. Could just be bad design also as cheaper moulds 😅.
Going to email you later with some pics. You can be honest, I won't be offended.
When I ordered them I didn’t notice that. If I did I wouldn’t have ordered this set. But I think you are right about that.
Thank you Tazmin♥️
Sherri, these are beautiful! How long do you let them cure before adding the back glitter resin?
Great video Sherri, I think I may do those colours for a set for my brother. I like the 3d effect and pattern for the floral look.
Can I ask a couple of questions please?
1.You had you white resin in little bottle ( I have some) but how do you clean them out, or do you just chuck them. Cleaning out tubs etc is such a messy job!
2. Do you know how to stop the centre diamonte, or any other embellishment, from shifting after you've put them to one side to cure?
Any advice would be helpful, thank you.
I think they would be awesome for your brother. Great colors.
Having the place where you let them cure be completely level is very very important of course. My problem is always carrying it over to that level area than they shift on me.
I will fix it and then somehow they always go back LOL but just not moving around a lot and 100% level area will keep them from moving.
It’s not that hard to clean up the bottles as long as you drain out as much resin as possible as fast as possible. And as long as you use 91% alcohol and shake real good. I just fill the bottle up halfway and shake and then I dumped it out and fill it back up again halfway and shake. That usually does it. I soak the caps in a cup of alcohol and stir for a few minutes.
The 50% alcohol doesn’t clean it that well and I have let it sit just too long before so I have chucked a few bottles. I usually dump the rest of the resin out into something like another mold to just make something out of it. But do it quick..
Unless you’re good with a piping bag. I’m just not good with those things.
Thank you 👍
@@sherrislife2046 thanks Sherri, I'm married to a joiner/builder so I got him to double check the levels of my worktop I use so thats sorted after a few mistakes. I've got some of that Alcohol but not sure what strength it is but ill ask my brother as he gave me some. Ive been a bit scared of using it TBH. But ill have another go.. ive got 2 MDF stacking shelves either from HOCHANDA or CREATE AND craft and they are working out fine for drying projects . Ill try what you say about items moving around, fingers crossed. So on with the plot and hope I get all my projects done in time for Christmas.
METALIC SILVER and PEARL WHITE are alcohol inks or paste please?
Alcohol inks 👍
@@sherrislife2046 many thanks dear
@@dalialovesdoggies4361
You are very welcome. I hope I could help.
The y are really awsome, I’m just a beginner what is castin resin for please
Casting resin is thinner.
It’s meant for molds. This flower coaster is done with pro marine tabletop resin. It’s a thick resin.
I normally would use casting resin for my coasters but to do this 3-D flower you need to use the thicker resin. It spreads too much if you use casting resin.
So just for this technique I use the thick resin. But any other time I will use casting resin.
Thank you 😊
@@sherrislife2046 oooh thanks a lot for this explanation, I didn’t even know that there are different kinds of resin 🤭 I really appreciate you took time to answer me 🥰
How long please did u wait between resin layers
About 7 hours Once it starts to get thick and solid then you can do another layer. It doesn’t have to be completely hardened.
@@sherrislife2046 many many thanks
@@dalialovesdoggies4361
You are very welcome 😊
I so thank you dear
Hi Sherri, can you please tell me where you got your molds? Not the amazon ones but before them. I think you said Eco solutions?
They remind me of white and silver pointtse
Oh, yes
Thanks Wendy😊
I would like to see the some flower coaster but with a blue background.
HELP😂🤣😅😁CAN I USE white pearl powder pigment instead of the white ink?
Oh well the paste is what does it.
That paste is what makes it flare.
So no powder will not work.
Castin craft or any type of white pigment paste. And remember very very little.
@@sherrislife2046 What is casting craft please
@@dalialovesdoggies4361
www.amazon.com/Environmental-Technology-1-Ounce-Casting-Pigment/dp/B001685QIG/ref=mp_s_a_1_1?crid=2XUPIVK6WBBWD&keywords=castin+craft+white&qid=1678739381&sprefix=castin+cra%2Caps%2C166&sr=8-1
Like one or two drops
You can add it to other colors of mica powder if you want, but only a little bit
@@sherrislife2046 Thank you dear. But what is the " job" of the "casting pigment" white drops?
@@dalialovesdoggies4361
That makes it flare like flower petals
With these coasters I used four drops to my resin, and then the colored alcohol ink.
I didn’t show mixing it, but I explained a little starting at 3:48 seconds of this video
A little wax then buff you won't see the scuff
I actually bought that Flitz polish and it works. Just needs a little elbow grease and you are so right they do disappear. Thank you very much Nickolas👍
Oh, if there is EVER an issue with any with Amazon, call or chat with them and they'll make it right. They refunded me for a resin purchase I had an allergic reaction to!
Hi Sherri. So I can donate to the address above and you will get the money???
In the description of everyone of my videos is a link to my PayPal. I use that for all donations. Thank you very much Sandra 🥰☺️ ❤️
@@sherrislife2046 Thank You Sherri. As soon as I get my money from the bank (long story short...someone compromised my debit card #. They didn't get my card, just my number) I will put a donation in. One thing I don't understand is when I order something online, I always use my paypal. So I just don't understand how that happened. I feel so damn violated. So you know now I have to get a new card and all that crap...
Anyway, Sherri you did a resin pour a bit ago and you used that beautiful liquid gold leaf and you used liquitex white acrylic ink. I waited so I could order those items so I could copy you exact LOL and now I'm ready but I can't find that video. Can you help me? Hopefully you remember the one I am talking about... Thanks Sherri!!!
@@sandrarodgers5015
First I’m going to attach the links to any of the videos that I use the liquid leaf on.
Hopefully this will help.
ruclips.net/video/ykJPOaKQhOQ/видео.html
ruclips.net/video/rnCc1GtdlX4/видео.html
ruclips.net/video/3QDC_7gmuVc/видео.html
I will keep looking for more. Remember how they had all those gas tank scammers around for a while? Well I used a gas tank that one of those scammers we’re in and they drained my entire checking account. I have had to change my card so many times.
Just to be honest with you I think it’s sometimes a good idea to change our cards every once in a while anyway.
The bank took care of everything that the scammer took so I was very thankful of that. But I just completely know how violated you feel. No hurry for anything I am just fine. I hope you are doing good also.
@@sherrislife2046 Hi Sherri. I found the coasters that you did using the gold leaf, liquid gold and the white acrylic ink. They are so beautiful. I am going to do those tomorrow and hope they turn out as nice as yous did. Anyway, I had to wait to get resin shipped to me. Sometimes it takes a little time. Thanks for all and take care!! Thanks Sherri! Sandy
Lol.. I got the same set from amazon
Right on 👍
Did you realize they were different sizes before you ordered them? LOL
I still think you’re beautiful
Just like Likfe nothing is perfect
Wow so beautiful and very creative! 💞🥰❤️ Come by and say hello if you get a chance, we'd love to share what we've been up to 😊❤️
I love your videos. Just what I’ve been looking for. I just watched the outer space one and it was so awesome. Thank you👍
@@sherrislife2046 Aw that's so sweet of you, I'm so glad you enjoy our videos! God bless!
They’re absolutely beautiful
Thank you 😊
Love these!!!