👉 amzn.to/3Eis4bv 👈 link to the Balancefrom Bike Trainer 👉 amzn.to/44ELgLu 👈 link to WTB Slick Tire I recently bought, assemebled and tested the Balanceform Bike Trainer. I have to say it’s probably the best budget tire-on bike trainer on the market right now. Setup was straight forward, I did find that the instructions were a little lacking, but heck that’s why I’m here to help out. After setting up the bike I knew the aggressive mountain bike tire would be loud. So, I purchased a smooth tire to lower the noise levels down to a point where I could listen to music or watch a video.
This was by far the best video demonstration for assembly/setup of the balancefrom bike trainer. It showed close up details in the video which I didn't see on any of the other videos. thank you for your help!!!
I bought my stand second hand with no instructions… watched 3 other videos and this is the only one that left me feeling confident I’d placed the tension bolt correctly. Thank you.
Best set up video! I’m not very bicycle savvy so the instruction sheet that was included wasn’t very helpful. With your video I was able to set up super fast and properly. Thank you!
Great video, I think any trainer that will use a roller on a tire is going to be louder than those that use a cassette. But the setup on those is a little more complicated, so it's either easy setup and loud, or more complex setup and quiet.
Thanks, cause I'm getting one tomorrow. The sound is super loud with the knobby tire, but I think also the cardboard underneath might be a contributor to the high sound. The tire sounds like it's touching the cardboard, I'd check to see if that'll considerably lower the sound with whoever tire. Although the smoother tire is far better, but if the cardboard is touching the sound could come down to nothing.👍
I have the super dumb version of this trainer, without the resistance adjustment cable thing. I actually found it on the street in good condition on recycling day so it's definitely worth the money and gets the job done, but still pretty noisy even with road tire slicks. You can still adjust the resistance though, just not when you're on the bike. I actually just upgraded to a direct drive model with electronic resistance, the Wahoo Core, which should be a massive upgrade from this. I'm looking to get more serious about training and this just wasn't good enough for me anymore, especially with the noise as we have neighbors. But for anyone not looking to spend too much on a trainer who wants to ride indoors several times a week during winter and where noise isn't going to be a problem, and maybe looking to get into indoor riding before committing to a much more expensive unit, it's pretty decent.
@@diymountainbike Yeah these things are amazing. Been riding on it for several weeks now and love it. Now I need to find someone to donate the wheel-on dumb trainer to! 😆
Have a Minoura mag turbo similar design unable to fit Roscoe 8. The front bottom cross bar. There is a version with out the cross bar just two legs on front of trainer. Little less stability but more clearance. Works ok with 700cc road bike.
I just want to ride my bike but I’ve moved to where it’s has lots of hills. I’m 66 yrs old. Don’t want the noise. lol. I just raised the tire off the roller completely. Probably not what I’m supposed to do but I have no noise.
Cool video - thanks! Just wondering, is it ok not to tighten the rollers so it doesn't touch the wheels? For me I just want to turn my bicycle into an indoor stationary bike, for some light exercises, not so much a workout so I don't really need high tension.
Got a clone of this trainer and my bike tire is dragging on the black bracket under the resistance wheel. Has anyone else run into this/have a solution?
I've been using this for my EBIKE, I had to do some modification for my axle to fit...replaced the axle cups with threaded pins .working perfectly. However it will not work on my other EBIKE because the motor wire comes in through the ends of the axle.
@@diymountainbike thank you. I have 20 so that's why it wasn't working. I ended up taking some very strong tape, those sand paper blocks, shoe laces, and ribbon to make my own contraption so it hits the wheel
Great question, it's up to you. The gears will affect the resistance. Higher gears make it tougher to pedal. I use the gear to set a rough resistance and the trainer knob to fine tune.🚴🚴🚴
👉 amzn.to/3Eis4bv 👈 link to the Balancefrom Bike Trainer
👉 amzn.to/44ELgLu 👈 link to WTB Slick Tire
I recently bought, assemebled and tested the Balanceform Bike Trainer. I have to say it’s probably the best budget tire-on bike trainer on the market right now. Setup was straight forward, I did find that the instructions were a little lacking, but heck that’s why I’m here to help out.
After setting up the bike I knew the aggressive mountain bike tire would be loud. So, I purchased a smooth tire to lower the noise levels down to a point where I could listen to music or watch a video.
This was by far the best video demonstration for assembly/setup of the balancefrom bike trainer. It showed close up details in the video which I didn't see on any of the other videos. thank you for your help!!!
Glad it was helpful!
This video is super thorough, from assembly, noise decibels, to suggestion of cable management. Marvelous !
Glad it was helpful! 🚴🚴🚴
Good to know that quick release axle is for bikes that already have one. I thought “what a pain to undo my axle every time” 😎
Yes that is a nice feature.🚴🚴
I bought my stand second hand with no instructions… watched 3 other videos and this is the only one that left me feeling confident I’d placed the tension bolt correctly. Thank you.
Your note made my day ! Thanks 🚴♂️🚴♂️🚴♂️
Best set up video! I’m not very bicycle savvy so the instruction sheet that was included wasn’t very helpful. With your video I was able to set up super fast and properly. Thank you!
Awesome, thank you! 🚲🚴🚲🚴
Great video, I think any trainer that will use a roller on a tire is going to be louder than those that use a cassette. But the setup on those is a little more complicated, so it's either easy setup and loud, or more complex setup and quiet.
Totally agree! 🚲🚲🚲
Thanks, cause I'm getting one tomorrow. The sound is super loud with the knobby tire, but I think also the cardboard underneath might be a contributor to the high sound. The tire sounds like it's touching the cardboard, I'd check to see if that'll considerably lower the sound with whoever tire. Although the smoother tire is far better, but if the cardboard is touching the sound could come down to nothing.👍
Thanks for the comment, I'll check on the cardboard.
Thanks, that's a pretty detailed video I really got my questions answered, just ordered such a trainer!
Glad it was helpful!
I have the super dumb version of this trainer, without the resistance adjustment cable thing. I actually found it on the street in good condition on recycling day so it's definitely worth the money and gets the job done, but still pretty noisy even with road tire slicks. You can still adjust the resistance though, just not when you're on the bike.
I actually just upgraded to a direct drive model with electronic resistance, the Wahoo Core, which should be a massive upgrade from this. I'm looking to get more serious about training and this just wasn't good enough for me anymore, especially with the noise as we have neighbors.
But for anyone not looking to spend too much on a trainer who wants to ride indoors several times a week during winter and where noise isn't going to be a problem, and maybe looking to get into indoor riding before committing to a much more expensive unit, it's pretty decent.
I've got a direct drive Saris H3, I really like it as well. Nearly silent.
@@diymountainbike Yeah these things are amazing. Been riding on it for several weeks now and love it. Now I need to find someone to donate the wheel-on dumb trainer to! 😆
Have a Minoura mag turbo similar design unable to fit Roscoe 8. The front bottom cross bar. There is a version with out the cross bar just two legs on front of trainer. Little less stability but more clearance. Works ok with 700cc road bike.
The clearance on some trainers can be tight for 29 in. Especially if you have a larger tire
That noise will definitely annoy the crap out of me lol. Great video
Lol I think my Neighbor would be well chuffed with the sound of a Motorcycle coming through the ceiling, i will need body Armor 😂
It was so loud, almost like a jet plane. 🚴♂️🚴♂️
@@diymountainbike I did what you suggested. Hardly hear anything with the new tire..thanks for the tips!
Thank you so much!!! Awesome video!!!!
Glad it Helped! 👍👍🚴♂️🚴♂️
I just want to ride my bike but I’ve moved to where it’s has lots of hills. I’m 66 yrs old. Don’t want the noise. lol. I just raised the tire off the roller completely. Probably not what I’m supposed to do but I have no noise.
I think that's a great idea. You should check out an ebike. Great for hills 🚴🚴
Big help,thank you!
Glad it helped!
Thank you for this!
My pleasure!
great review!
Thanks!
awesome video!!!
Thanks!! I appreciate it!
Great information.
Glad it was helpful!
Cool video - thanks! Just wondering, is it ok not to tighten the rollers so it doesn't touch the wheels? For me I just want to turn my bicycle into an indoor stationary bike, for some light exercises, not so much a workout so I don't really need high tension.
Yes, you can do that. Happy pedalling 🚴🚴
It is safe to use on the bike that has rear wheel with nut and bolt instead of quick release axle?
Yes it is. Happy riding 🚴🚴
Got a clone of this trainer and my bike tire is dragging on the black bracket under the resistance wheel. Has anyone else run into this/have a solution?
I haven't heard of that before. 🚴♂️
hey man great videos, maybe add some sound proofing for the room, aswell mic positioning closer too your head, otherwise awesome videos thank you!
Does that trainer only support certain tire sizes? Or can you get different sized trainers?
It's best for 26 and 27.5 MTB tires and 700c road. A small 29 inch tire will just barely work, but I don't suggest this trainer for a 29er.
I've been using this for my EBIKE, I had to do some modification for my axle to fit...replaced the axle cups with threaded pins .working perfectly. However it will not work on my other EBIKE because the motor wire comes in through the ends of the axle.
I've got a few ebikes and understand what your talking about.
My wheel is off of the magnetic part in the back. Help
Most of these bike trainers work best with 26 inch wheels.
@@diymountainbike thank you. I have 20 so that's why it wasn't working. I ended up taking some very strong tape, those sand paper blocks, shoe laces, and ribbon to make my own contraption so it hits the wheel
Quick question! Can you connect it to zwift?
No, this trainer doesn't connect to any apps.
Brown Jason Garcia Steven Thomas Frank
💯 percent 👍🚴🚴🚴
Have you tested the noise with different tyre pressures?
I didn't test changing the pressure. Changing the tire made a huge difference. The noise seems to be generated from the tread on the tire.
Sounds noisy this would drive my neighbor below me nuts ! Any products out there Quieter than having a Motorcycle in your Apartment?
A direct drive trainer is quietest. They can cost a lot more though.
Gonzalez Mary Wilson Thomas Harris Donald
Sammy Jean Paul
Seriously I love bike trainers but hate the noise.
You put a trainer tire on, it's quiet then ;)
Just done a test on mine it was 35 decibels
I use mine a lot. 🚴♂️
Will NOT work with 29" wheels.............
I was using a 29er. The geometry of the bike might be different though.
What gear should your bike be in?
Great question, it's up to you. The gears will affect the resistance. Higher gears make it tougher to pedal. I use the gear to set a rough resistance and the trainer knob to fine tune.🚴🚴🚴