I've been fighting the same issue for a couple weeks now. Finally figured out that there was a short in the ignition switch. It would start the mower but the PTO wouldn't come on. Wiggled the key around and the PTO would click on and off. $14 switch at our local mower parts store.
Take the mower deck belt cover off an make sure the belt is not broken. Get the wiring diagram and start testing the circuit with a volt meter. It sounds like you aren't getting 12V to the PTO.
mine doing same thing as of today. every belt system has a tensioner pulley , and evey one of those has a spring on it somehow. likely just a separate spring, which has probably broken and fell off of the pulley. it almost has to be that, like You the chutch is engaging but with the spring gone it cannot get tight to the belt, so the blades cannot turn.
Maybe I am missing something but I suspect you have to activate the seat switch and deactivate the parking brake to turn on the belt PTO shaft. Have you checked your safety switches?
When Pto clutch froze it threw the belt tension spring off. It was just hanging there. My son found it when I gave up, reattached the spring and I’ve cut over 6 hours since !
Hi Jerry! We had the same problem, different mower. We had a emergency off for blades in case your butt comes off the seat. Our wires needed some work, and poof all good! Maybe same problem? Hope its a easy fix either way.
Clutch or switch even if new don’t mean it’s a good part…. Check with ohm meter continuity both switch and clutch …. Check wires maybe blew connection loose.. mine will engage clutch with engine off so I can hear click and know it’s working. Definitely new belt…. Nothing bound under mower in blades. String wire etc
Thanks Jake, my mechanical abilities when it comes to electrical is not good at all. I’ve never understood how to use ohm meters and testers. I’m going to next week remove the blades and check all that out, but the blades do spin freely. I forgot to and wish I would have included in the video that when the mower is off and key on the pto clutch does click. So I’m thinking it’s getting power. Thanks for the input, I’ll work on it next week when schools back in and maybe do a follow up video of every thing I have checked
@@fortyninemore if it’s engaging then only other thing is belt…. But also just because it’s new don’t mean it’s good….maybe bad (new) Chinese clutch….👍. Good luck
@@fortyninemoresounds electrical then. All your safety circuits need to be functioning properly to allow the blades to be turned on. Both drive bad safeties, seat, parking brake, reverse pto kill switch if it has one
I had same problem with my husquavarna. All it was the connection was loose and almost completely unplugged. Plugged it back in and wa-la it worked. Visual check of everything will find the problem.
Развлечения
I've been fighting the same issue for a couple weeks now. Finally figured out that there was a short in the ignition switch. It would start the mower but the PTO wouldn't come on. Wiggled the key around and the PTO would click on and off. $14 switch at our local mower parts store.
Great you got it fixed!
Hope you get it sorted.
Working on it 👍
Hi Jerry well i dont know about lawymowers lol but I know you can figure it out have a great day stay safe
Thanks 👍
Take the mower deck belt cover off an make sure the belt is not broken. Get the wiring diagram and start testing the circuit with a volt meter. It sounds like you aren't getting 12V to the PTO.
Thanks, I will check all the belt pulley and the belt. Equipment electrical is not my strong point
mine doing same thing as of today.
every belt system has a tensioner pulley ,
and evey one of those has a spring on it somehow.
likely just a separate spring, which has probably broken and fell off of the pulley. it almost has to be that, like You the chutch is engaging but with the spring gone it cannot get tight to the belt,
so the blades cannot turn.
Check all the springs, that was our problem, runs great now
Maybe I am missing something but I suspect you have to activate the seat switch and deactivate the parking brake to turn on the belt PTO shaft. Have you checked your safety switches?
All were fine, belt tension spring fell off, all fixed! Thanks
What did you find out? My lawnmower is doing the exact same thing and I have the same model. I just get a clicking noise when I engage the blades.
Same issue. Belts came loose and fixed that. Now it clicks like the clutch did engage but still not turning the blades.
When Pto clutch froze it threw the belt tension spring off. It was just hanging there. My son found it when I gave up, reattached the spring and I’ve cut over 6 hours since !
Check belt tension spring
Hi Jerry! We had the same problem, different mower. We had a emergency off for blades in case your butt comes off the seat. Our wires needed some work, and poof all good! Maybe same problem? Hope its a easy fix either way.
I’ve checked all the wires, I’m stumped
@@fortyninemore Ah ok, ya our safety switch and wire under the seat was our problem. Good luck!
Maybe it’s the switch not the wires. You can unplug and short the wires to bypass the switch.
@@69ztang Yep we had a bad switch. Bought a new one poof no issues. Was hoping the same for Jerry. Easy fix.
if it has an electric pto, the drive belt should always be under tension.
Drive belt is tight it’s not connected to the pto clutch
Clutch or switch even if new don’t mean it’s a good part…. Check with ohm meter continuity both switch and clutch …. Check wires maybe blew connection loose.. mine will engage clutch with engine off so I can hear click and know it’s working. Definitely new belt…. Nothing bound under mower in blades. String wire etc
Thanks Jake, my mechanical abilities when it comes to electrical is not good at all. I’ve never understood how to use ohm meters and testers. I’m going to next week remove the blades and check all that out, but the blades do spin freely. I forgot to and wish I would have included in the video that when the mower is off and key on the pto clutch does click. So I’m thinking it’s getting power. Thanks for the input, I’ll work on it next week when schools back in and maybe do a follow up video of every thing I have checked
@@fortyninemore if it’s engaging then only other thing is belt…. But also just because it’s new don’t mean it’s good….maybe bad (new) Chinese clutch….👍. Good luck
@@NoneyaTexasontheback20 thanks my friend
Hope you get it started it. Let me share this with my boyfriend to see if he knows what’s wrong with it.
Please do, still have not figured it out
dont know but interested in finding out what you find out
I’ll let y’all know
Sending my support
Thanks my friend
check for bad routing of the drive belt or a spring left off from changing out the pto.
Drive belt nice and tight, deck belt loose. The Pto will click but not spin
@@fortyninemoresounds electrical then. All your safety circuits need to be functioning properly to allow the blades to be turned on. Both drive bad safeties, seat, parking brake, reverse pto kill switch if it has one
@@fortyninemorealso, the blades shouldn’t turn on unless you have both drive bars closed.
@@DamYankeeOutdoorsthanks, fixed. Pto clutch was locked up and when it did it popped the belt spring. Son found it and repaired this morning
U need to pull ur handles in to hit the safety switch’s to engage ur pto
Pto clicks, mower will not start if handles are right
Yea I believe so
Could your spindles be both seized?
All spin freely
having the same issue with the same mower trying to find out the problem myself
Check all springs, tension spring was off on mine
Wish I could help ya ,man ✌🍀
👍
I had same problem with my husquavarna. All it was the connection was loose and almost completely unplugged. Plugged it back in and wa-la it worked. Visual check of everything will find the problem.
👍
Plugging along on #11 of 17
😃
I wish I could help bro,,,,,,, 😡😡😡😡😡that kind of stuff makes me mad
👍
@@fortyninemore 🙏🙏
Wiring.
Ended up being a belt spring
I ask my husband
Ty
Can you show what you fixed?
What spring did you adjust/reinstall?
Help!!!
I’ll try to get back out there in next couple days, and let you know
New sub here to support from southwestlivingwith Val channel. 😊
Welcome to the farm
least helpful video I have seen in a while
Not about help🤣 for you