Hi everyone, we see there is a lot of discussion regarding the top to bottom washing of this truck. When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
It's better to just rinse from top to bottom first, then apply soap, and then rinse from top to bottom again. You waste less water, time, and money doing it this way
I think the chemical of the soap needs a time to react on the surface so thats why he starts from the bottom to the top. Then rinse from the bottom first so that the soap get enough time at the top to react effectively.
As a semi pro, I get the bottom to top thing and also get that so much has been cut out but the back of the unit and back of the 5th wheel pin block on trailer had been missed on Snow foam and first initial rinse, meaning irrelevant of futher work it was never cleaned properly to start with and is one reason I now clean my own truck rather than pay for a "professional" amateur to mess it up. I can take an extra 2 hours knowing I don't miss a square inch on my truck at 1/3rd of the price to my boss.
@@IronWarrior95 Incorrect Washing from bottom to top would only cause the person to rinse the bottom AGAIN after all the dirt from the top settles at the bottom. Top to bottom is the most logical and most efficient.
Dust in a pressure washing bay ? That is the one place on the entire planet you can categorically guarantee there will not be any dust. Put your dunce cap back on
Talo S it’s going alright bro! Barely been a month so my body’s still getting used to it👌🏾we wash about 4 trailers and 4 trucks a day maybe more so it just gets tiring but so far I like it bro
rinsing bottom up is the correct way, this way you don't loose the cleaning product. By the time he reaches the top there is still detergent to work with, if you work from the top by the time you get to the bottom the detergent is all rinsed off and so you have no cleaning agent to work with. obviously a final rinse takes place from the top down and you can see this in the video. Seems there are a lot of people who should be educated by the video rather than criticising it!!
Hi Jerry, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
@@NertaOfficial this is not true when you wash from bottom to top the soap you rinse with water falls down to the part youve already rinsed The dirt will come down no matter what due to gravity But if you wash from top to bottom it comes down in one act leaving a cleaner finish. I have detailed Trucks, cars, vans, commercial vehicles and etc.
Yeah it is it ensures more comes off but pretreatment first also helps break the dirt up either way if it was me if pre rinse soap go from the top to the bottom and repeat one more time then one final rinse
Sorry guys, great respect to you for the cracking job you do, But during the 19 years I was valeting it was always top to bottom so the dirty water did not do its job again Keep up the great work 👍👌
Scandinavian roads have higher diluted salt on the roads, so going down up makes sure the pressure has gone over the whole vehicle😉 And up down at the end
It's terrible that 90% of the people are idiots who don't understand any shit, that touchless cleaning is different and that top to bottom wouldn't make any sense and won't make the process efficient. But it doesn't matter how hard you try.. they are like "flat-earthers" and won't even try to understand it.. it's just wasting time when trying to explain them!
@@IronWarrior95 If you think discussing different ways of washing vehicles with strangers on RUclips is "terrible" or comparing them to "flat earthers" because they don't agree with an angry little person (you) is possibly getting things slightly out of proportion fella ? Maybe time to reevaluate your life (or get one) .
Be aware , this video is on A speed run. The average time to wash A vehicle this size is about (45m - 1hr) , not counting cleaning wheel frames or checking tire gauges.
As a former supervisor and trainer at Blue Beacon, a couple of things to note: His spray distance when washing is a little far, especially when washing the tires. He's not hitting his front and rear angles well. It's best to physically be next to the truck so those angles are much tighter. When washing the top of the trailer, he's not lifting his arm. This causes an improper wash angle on the top (the bottom edge of the spray is much closer than the top). Lifting your arm helps that spray to be nice and even. Of course, the wash bottom-to-top is cringey as well. Soap application was very good besides the issues with the angles. Soap product seems to work very well.
Did everyone see how clean the truck was when he was finished? There is a very good reason after letting it soak that he starts from the bottom and works his way up. I don’t feel like explaining it. LOL trust me he knows what he’s doing.
Most truckers wash bottom up due to how thick the build up gets when going top to bottom. At least in my area when we clean the fleet it’s MUCH easier to pressure wash bottom to top, than top to bottom.
hello ive just started washing a small fleet of Amaonia tankers how and what chemicals should i use also whats the DOT standard for cleanliness for said tankers?thanks
I find it funny how commenters that like to believe are professional 40+ years of detailing vehicles and more on tankers. They still even have the audacity to comment on the official uploader and school them on detailing.
Hi, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
More like it wastes the soap and you need more time and water top to bottom because it's less effective and misses the point. The concept of touchless cleaning is bottom to top. Period.
Step 1 is rinsing the entire truck. Then step 2 is spraying the soap lair. Step 3 is rinsing it all again. Last step and definitely not least is work from top to bottom.
Oh dear me, this comment section is toxic. Okay, pay attention to fully capitalized words as they're important. I'll only make one attempt at this, here goes: When you do a regular wash, as in with a bucket and sponge/wash mitt, you would do top to bottom. Yes that is correct. BUT! A touchless wash, is done bottom to top. Let me explain why and do try to understand this before you start typing. What a car soap does generally is to LIFT dirt off the surface and ENCAPSULATE as much as it can. The soap is also designed to easily ATTACH itself to water. So when you spray that snow foam onto the vehicle's surface... the soap will try to lift the dirt and encapsulate it (grab onto it). So what happens when you wash top to bottom? As you rinse from the top: dirt, soap, and water will start FLOWING down. This flowing water will then grab the soap down with it. Does this pull the dirt the soap was holding on to? NO. Why? The pull of the water on the soap is stronger than the soap's grab on the dirt. And the dirt is stuck to the vehicle surface STRONGER than the soap's PULL. This is where the pressure washer comes in handy. The strength of water will knock the dirt that has been loosen up by the soap and thus clearing it off the vehicle's surface. You want the soap to still be there lifting and encapsulating the dirt when you knock it with the pressured water. Because a flowing water WILL NOT do the trick. Hence, bottom to top.
I work at blue beacon (a truck wash) and this just hurt the watch. He pretty much just washed it backwards than how you are supposed to. All that dirt is just falling back down to where he cleaned already
Você começa aplicando o produto por baixo. Depois começa retira também por baixo, assim tem melhor aproveitamento do produto. Aqui no Brasil somos acostumado a lavar ao contrário, porém por conta dos produtos aplicados o melhor é começar por baixo.
Hi, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Noooo noo nooo washing a truck is very tiring and hurts your arms and legs if you're not going to be washing trucks for a while there's no really point to learn a way to wash your truck
I'm not here to debate to start from top or bottom but more like why don't they have the roll around stairs like you see at home depot that have safe side railings and feet that lock down to make it stable so you can actually get the top.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Hi everyone, we see there is a lot of discussion regarding the top to bottom washing of this truck.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Hello, do you have a representative in Brazil? I would like to purchased some products.
If you say so...
It's better to just rinse from top to bottom first, then apply soap, and then rinse from top to bottom again.
You waste less water, time, and money doing it this way
👌👌👌
I think the chemical of the soap needs a time to react on the surface so thats why he starts from the bottom to the top. Then rinse from the bottom first so that the soap get enough time at the top to react effectively.
5% comment: others
95% comments: he should start from top to bottom
95% is the fans from the muppshow.
Stian Myrdal Laursen we washed my grandfathers truck top to bottom and he had four and my uncles so Ik a thing or two about washing trucks
u r rite? not professional the worker. but product is amazing.
It's better to start from the top ,because u use
Less water and less hand move ment
Bhanu Agrawal also he din”t do the roof too
we pros start from the top.
Is it weird to see them start from the bottom and go up.
Seriously why from the bottom and doesn’t clean the wheels right
@@termainethompson3601 that's what she said 😏😅
Was about to comment the same.
from the top will be not clean and waste water , dirty water going down more dirty
I could do that all day and never get bored.
Go to blue beacon and get payed to do it
As a semi pro, I get the bottom to top thing and also get that so much has been cut out but the back of the unit and back of the 5th wheel pin block on trailer had been missed on Snow foam and first initial rinse, meaning irrelevant of futher work it was never cleaned properly to start with and is one reason I now clean my own truck rather than pay for a "professional" amateur to mess it up. I can take an extra 2 hours knowing I don't miss a square inch on my truck at 1/3rd of the price to my boss.
Why he does not start from top?👀
This way the lower parts get extra time to soak. Then rinse from top to bottom. Grtz
aplicação de sabão é de baixo para cima e a retirada do sabão é de cima para baixo, se gasta menos tempo e água .
Qual é o produto ?
I was thinking the same.
ruclips.net/video/F2ua4ZEHQc8/видео.html that’s why. 😉
Seeing all the dirt being washed from top to bottom is more satisfying. Saves time. 😎
With contactless washing you are supposed rinse into fresh soap because you effectively use the high pressure water as the sponge
actually it was bottom to top.
No it doesn't and it is less effective and needs more time and water and wasted the soap mostly
@@IronWarrior95
Incorrect
Washing from bottom to top would only cause the person to rinse the bottom AGAIN after all the dirt from the top settles at the bottom.
Top to bottom is the most logical and most efficient.
So therapeutic watching the cleaning process
Please help me with some money I'm in crisis ineed it this is my account 350810000000000933365213
Great job! Suggesting that you wear a mask to filter out fine dust particles.
In Russia mask wears you.
There's no dust when you use a pressure washer.
It’s in a wash bay, why tf would there be dust
@@blake1995 you can inhale water particles. It is correct to wear mask in those environment
Dust in a pressure washing bay ?
That is the one place on the entire planet you can categorically guarantee there will not be any dust.
Put your dunce cap back on
I love watching trucks get cleaning and love watching oil changes too so satisfying.
This is part of my job, very satisfying
I start tomorrow semi truck washing. Never done it so I hope my boss shoes me the easy way
@@mclovin9283 how’s it going I want to start too
Talo S it’s going alright bro! Barely been a month so my body’s still getting used to it👌🏾we wash about 4 trailers and 4 trucks a day maybe more so it just gets tiring but so far I like it bro
@@mclovin9283 get me on the knowledge bro.
@@mclovin9283 been washing semis for about a year and i still love it lol
rinsing bottom up is the correct way, this way you don't loose the cleaning product. By the time he reaches the top there is still detergent to work with, if you work from the top by the time you get to the bottom the detergent is all rinsed off and so you have no cleaning agent to work with. obviously a final rinse takes place from the top down and you can see this in the video. Seems there are a lot of people who should be educated by the video rather than criticising it!!
It drives me nuts that he starts rinsing from the bottom
Hi Jerry, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
@@NertaOfficial
this is not true when you wash from bottom to top the soap you rinse with water falls down to the part youve already rinsed
The dirt will come down no matter what due to gravity
But if you wash from top to bottom it comes down in one act leaving a cleaner finish.
I have detailed Trucks, cars, vans, commercial vehicles and etc.
Idiot
@@timocolove2175 NOOB
@@YourName-jm7lz MEGA-NOOB
Adam Baxdiqca Rahatlayir Temizlik Gozel Birseydir 😊😊__26.01.2024
I don't care if it's top to bottom or right to left. It's very satisfying to watch.. 😁
it irks me when they dont start from the top
Why is this oddly satisfying???
Job well done 👍
WAH🤗🤩 THIS MAN doing very good 👍 job.Not some people doing not to clean well because doing job not from heart 💖✌️💪🌞🧚
Might be a dumb question, but isn’t it better to rinse the dirt off, then soap it?
Yeah it is it ensures more comes off but pretreatment first also helps break the dirt up either way if it was me if pre rinse soap go from the top to the bottom and repeat one more time then one final rinse
Soap breaks up the dirt better than water.
Same as car wash 🙂
If he did it from top to bottom this vehicle would you cleaned quicker and youd save more water by doing so.
@Stian Myrdal Laursen no because I'm dont have one🤣 your name doesnt sound English.. sounds Welsh but that's by the by😊😊
How can I download this video? It's so satisfying to watch
Sorry guys, great respect to you for the cracking job you do,
But during the 19 years I was valeting it was always top to bottom so the dirty water did not do its job again
Keep up the great work 👍👌
Scandinavian roads have higher diluted salt on the roads, so going down up makes sure the pressure has gone over the whole vehicle😉
And up down at the end
This looks very satisfying to do.
I was halfway through typing my own comment but then saw everyone else has put the same lol 😂😂
There was something very soothing and satisfying about that vid
It’s real simple start with your foam at the bottom and work your way up, and rinse from the top down.
90% of the people are obviously not smart enough to understand that...
No, this isn't soap, it's a traffic film remover, bottom to top makes full use of the product and doesn't just wash it away.
Não é uma crítica, mas uma sugestão, na hora de jogar agua melhor seria começar de cima para baixo...
Llevo años lavando vehiculos y creo q le daria clases para que le quedaran mil veces mejor 😊
Please wash from top. Save water... 💗
Nossa, deu um trabalho enorme, parabéns à todos.
pq ele é burro... quem já se viu lavar de baixo pra cima ????
I can watch such videos all the day😊
Please help me with some money I'm in crisis ineed it this is my account 350810000000000933365213
He's actually doing it correctly from bottom to top getting maximum water on the truck.
It's terrible that 90% of the people are idiots who don't understand any shit, that touchless cleaning is different and that top to bottom wouldn't make any sense and won't make the process efficient. But it doesn't matter how hard you try.. they are like "flat-earthers" and won't even try to understand it.. it's just wasting time when trying to explain them!
@@IronWarrior95
If you think discussing different ways of washing vehicles with strangers on RUclips is "terrible" or comparing them to "flat earthers" because they don't agree with an angry little person (you) is possibly getting things slightly out of proportion fella ?
Maybe time to reevaluate your life (or get one) .
@@IronWarrior95 waste of time and water.
@@IronWarrior95 man’s really comparing people that think cleaning from the top down is correct to flat earthers.
I suppose on the Moon where there's less gravity the bottom to top might work better......
Be aware , this video is on A speed run. The average time to wash A vehicle this size is about (45m - 1hr) , not counting cleaning wheel frames or checking tire gauges.
Rinse off the dirt first before applying the foamy soap after u put the soap then work in all the areas den rinse off the soap again
That's what I was thinking too
@MTH Power Wash LLC timely? 🙄
Solche Videos beruhigen mich voll 👍
👇
Well since we are all stick inside or atleast at home because of Corona virus here I am at 5:48 am watching power washing videos.
Wow this is nerta so nice dirty truck is tanker is so clean 😍😍😘🤩🤩😱😇💖💖
Call me crazy I would LOVE this job again *edit did small car to full rig inside and out loved seeing it go from Beast to Beanty*
HUGE ANIME BREASTS
so satisfying to watch
As a former supervisor and trainer at Blue Beacon, a couple of things to note:
His spray distance when washing is a little far, especially when washing the tires.
He's not hitting his front and rear angles well. It's best to physically be next to the truck so those angles are much tighter.
When washing the top of the trailer, he's not lifting his arm. This causes an improper wash angle on the top (the bottom edge of the spray is much closer than the top). Lifting your arm helps that spray to be nice and even.
Of course, the wash bottom-to-top is cringey as well.
Soap application was very good besides the issues with the angles.
Soap product seems to work very well.
Ola tudo bem ! Vc sabe que tipo de produto e usada pra esse tipi de veiculo bem sujo ?
Shut up
Dude, top to bottom, TOP TO BOTTOM ALWAYS.
Please brother help me with some money I'm in crisis ineed it this is my account 350810000000000933365213
Hi Nerta .. what foam or Cleaner Liquid you use ?
When u clean with water start from high of the vehicule. You reduce consamation of water.thank's for sharing
That's really nice 👍..
Seems this method consumes more water🌊💧 than regular wash???
Let's end the battle 😁
Start from the middle 😂😂😂
I’m sure that wash took a lot of quarters.
😂😂😂
How many liters of water did it take to clean such a truck?
Did everyone see how clean the truck was when he was finished? There is a very good reason after letting it soak that he starts from the bottom and works his way up. I don’t feel like explaining it. LOL trust me he knows what he’s doing.
he don't know shit! if he did then why does he have to go back to the same spot to rinse off the dirt he allowed to drip on. no explanation needed.
@@rhvreramon its hard to argue with stupid ignorant like you
@Nerta official how much pressure do I need to rinse the vehicle by using your touchless product?
Odd to say, cleaning the truck made the world feel a better place to live in 😀😀
💯 right
Quedo pipi cucu👌
Pregunta: ¿El enjuague no debería ser desde arriba hacía abajo?.
Sería lo correcto! Enjuagas más rápido, ahorras agua y tiempo
Best pressure washing video I've ever seen would love to see an even longer one
Very very Satisfying......
Most truckers wash bottom up due to how thick the build up gets when going top to bottom. At least in my area when we clean the fleet it’s MUCH easier to pressure wash bottom to top, than top to bottom.
I don't care how you look at that still makes any sense at all top to bottom is the best way to go
@@thomasreyes2857 if there is not that much build up, yes. 90% of the time that is best.
hello ive just started washing a small fleet of Amaonia tankers how and what chemicals should i use also whats the DOT standard for cleanliness for said tankers?thanks
Só uma dúvida pq n lavar primeiro de cima p/ baixo ?
He should’ve rinsed first then apply the foam and rinse once more 👌
satisfying video i ever seen
I find it funny how commenters that like to believe are professional 40+ years of detailing vehicles and more on tankers. They still even have the audacity to comment on the official uploader and school them on detailing.
and after 50 billion years gravity still works the same. Top to bottom.
Is the accompanying soundtrack available on 45rpm or 33 rpm vinyl LP ?
It be chill 🙄 !!
Regardless of where you start washing, always rinse top down, and yes I wash my own truck every week
- Å fan! 👍
He probably start from his feet to his head when takes a shower
Hi, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
🤣🤣🤣
Feel free to shut the fuck up ignorant bitch. Also, starting from feet to head is correct way when taking a shower. I hope you shut the fuck up😁
@@Sy_h fuck you fucking bitch I can whatever I want how about you feel free to shut the fuck up
@@JorgeGarcia-wq2lu 😂
Yes.it saves lot of water & soap by cleaning from top to bottom.
More like it wastes the soap and you need more time and water top to bottom because it's less effective and misses the point. The concept of touchless cleaning is bottom to top. Period.
А у нас тачки сверху вниз моют😉люблю смотреть как работают другие,а за мной только начальник смотрит🤭
Step 1 is rinsing the entire truck. Then step 2 is spraying the soap lair. Step 3 is rinsing it all again. Last step and definitely not least is work from top to bottom.
Exelente profissional. Caprichoso intende de lavação. Parabéns 👍👍😘
Amazing process sir
im satisfied when im cleaning my car
I can i work here as a truck cleaner. Amazing job i love it too much.
Sar ma tank Wasing karta ho kamikal ka kahi mari jaror at to bata estim bas kastic bas
Mara ko 10 sal axpirians ha mo no 9012227647 sampark kar ya ga
@@zaidsaifigodsongs5849 thanks i really appreciated your kindness
Award winning performance
It's more satisfying to watch if he start washing from the top
Se começar a lavar de cima pra baixo, gasta menos água e fica mais limpo
A nice technique to wash our own vechile
Oh dear me, this comment section is toxic. Okay, pay attention to fully capitalized words as they're important. I'll only make one attempt at this, here goes:
When you do a regular wash, as in with a bucket and sponge/wash mitt, you would do top to bottom. Yes that is correct. BUT! A touchless wash, is done bottom to top. Let me explain why and do try to understand this before you start typing.
What a car soap does generally is to LIFT dirt off the surface and ENCAPSULATE as much as it can. The soap is also designed to easily ATTACH itself to water. So when you spray that snow foam onto the vehicle's surface... the soap will try to lift the dirt and encapsulate it (grab onto it). So what happens when you wash top to bottom? As you rinse from the top: dirt, soap, and water will start FLOWING down. This flowing water will then grab the soap down with it. Does this pull the dirt the soap was holding on to? NO. Why? The pull of the water on the soap is stronger than the soap's grab on the dirt. And the dirt is stuck to the vehicle surface STRONGER than the soap's PULL. This is where the pressure washer comes in handy. The strength of water will knock the dirt that has been loosen up by the soap and thus clearing it off the vehicle's surface. You want the soap to still be there lifting and encapsulating the dirt when you knock it with the pressured water. Because a flowing water WILL NOT do the trick. Hence, bottom to top.
Wrong
@@adamdavis2788 gravity denier.
Que ? Produtos voce usa pra lavar ??
0:58～下側からやってるんですね（汗）
個人的に上から下の方が効率良さそうに思います=3
hi
Will this stain or bleach my polished aluminum or strip my wax ??
Como sempre, excelente aplicação!!
I work at blue beacon (a truck wash) and this just hurt the watch. He pretty much just washed it backwards than how you are supposed to. All that dirt is just falling back down to where he cleaned already
It's good if he start from the top
It's better he didn't! 😌
Rinse should start from top to bottom
No with touchless washing it’s the opposite
Just imagine doing the two bucket method on these trucks 🤣🤣🤣
That's common in mexico you wouldn't believe how well they wash huge trucks
You should wash it from top to bottom..it the right step
That tanker stills more clean then my own phone.
now that is one clean Truck
Y
Taskskksksj
Jsjjzjzjjjajajjajsmkajjsjsjjsjsjjsjmsjsjjsjsjjsjsjjsmsjjsjsjjjkaaskakskksksks
Quanto disperdício de água... deveria começar a enxaguar por cima.
Que produto será que é esse?
Nice transformation!
Nice but he proper cleaning is up going down dirt is all over
ruclips.net/video/F2ua4ZEHQc8/видео.html
@Stian Myrdal Laursen you should brush your teeth regularly
@Stian Myrdal Laursen what the f ' every day. I simple brush my teeth every meal and snack almoat 4 times a day to feel fresh and clean.
@@pooyuu9186 Do you pressure wash your teeth? Tehe.
@@willowdynamite9297 and ill give you 10 percent discount promise avail our promo house demolition i want to test my backhoe teeth
Better washing from top to bottom. It makes you save time and water
Eu nunca vi lavar um veículo de baixo pra cima é de cima pra baixo eu sei fazer uma lavagem no veículo de forma correta
Você começa aplicando o produto por baixo. Depois começa retira também por baixo, assim tem melhor aproveitamento do produto. Aqui no Brasil somos acostumado a lavar ao contrário, porém por conta dos produtos aplicados o melhor é começar por baixo.
@@Cristianderson_Rib ele tbm não lavou no meio dos chassi
@@LuanGANGAM mais eles sempre lavam. É que os vídeos nem sempre mostram tudo.. mais os produtos deles são ótimos e fazem muita diferença
Joia rapasiada, estou procurando algo para lavar alumínio e inox q de um acabamento brilhoso, alguem conhece algum produto. Não posso usar intercape.
Good work but I always wash top to bottom you can do however you want I don't care but what is an amazing tune in the background
Hi, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Почему снизу в верх смывает? Непроще сверху вниз?
Que estrés que no inicie la limpieza desde arriba😖
Kkkk podes creer me da cosa ver cuándo lo hacen así
Ftyhmkothrsefg. Trvnmvhfcbesryhv. ❤
Tefgcgjesfhfesc. Yujlfhksewuo,yhjm.
Ghngdddefhjrdc. Tghnfsvndesgnfwt.
Rfgdvgjdwezssfg. Yhfgyrgjruhkoesjm.
Orhmdesfgjmfvg. Gtethdgjteyhmuiok.
Makes me want to wash this truck!!
Noooo noo nooo washing a truck is very tiring and hurts your arms and legs if you're not going to be washing trucks for a while there's no really point to learn a way to wash your truck
Good jobs
Whats the average pressure of the lance ? Not specific for the foam, just to the rinse
I guess it does get clean - Using a 10,000psi hot water rinse.
Other contactless washing too they start from bottom to top. 👍
Wait...u mean that a pressure washer helps clean a truck?!! AMAZING!
He tryna get paid overtime 😂😂
I'm not here to debate to start from top or bottom but more like why don't they have the roll around stairs like you see at home depot that have safe side railings and feet that lock down to make it stable so you can actually get the top.