Full Restoration - Scrap Motorcycle to Fully Electric Future Bike
HTML-код
- Опубликовано: 29 июл 2022
- What about making an Electric Motorcycle from Restoring and modifying a Scrap one ? This Project took more than a Half year. We Restored the Motorcycle First and then, Modified it. We worked very hard in this project. The main Motive for making a Scrap Motorcycle to a Electric Bike is to go forward towards the Future. We Removed the Engine and inserted the Battery in the Fuel tank Now, We have a Lot of space in the Engine Section. Yet we didn't use the engine space but we can use this space for a trunk or we can install a secondary battery there.
The main Features of this Bike are as Follows :
o It has a Top Speed of more than 80km/h
o Time to Full Charge is around 6 hours with a domestic charger but with commercial charger, the time will reduced.
o It has a Range of 100km Distance on a single Charge (Not Tested Yet)
o It also has a Reverse System
o It has 3 Modes : Slow, Normal & Fast
o No Noise
o No pollution
o No Maintenance
Specs:
o 72V 1500 watt Hub Motor
o 72V 20A LiPo4 Lithium Ion Battery
o 72V 2A Domestic Charger
o Rear Disc Brake
o Electronic Brake
o Main Switch Breaker
Also Watch our Other Videos:
Full Restoration 60 years Old 1962 Vespa Scooter
• Full Restoration 60 ye...
Full Restoration 40 Years Old ruined Classic Motorcycle
• Full Restoration 40 Ye...
Turning a Vintage Motorcycle into an Incredible Cafe Racer | Full Restoration
• Turning a Junk Motorcy...
I did my Best in this Video. So, If U like this Video, Please Give a Thumbs Up and Give us Suggestions and FeedBacks in the Comment Box.
Do Subscribe to Encourage Us :
ruclips.net/user/livewithcre... 
Хобби
![PADDINGTON IN PERU - Official Trailer [4K] - Paddington Bear is back!](http://i.ytimg.com/vi/lKgitu25ZAg/mqdefault.jpg)
good work , but a few concerns . The front downtube engine mount removal is dangerous. The original engine is designed to be a load bearing part of the frame . You reinforced the upper backbone but should support the front fork tube to the frame center .
Yes the engine is a "stressed member" i believe normal term is. This is why I chose carefully for my electric project - it has a full cradle frame with 2 downtubes which makes it easy to build a rack or shelf onto.
at the 21:03, you can see how the frame of the electric motorcycle flexes/ bends when braking. eliminating the engine support and the engine itself removed from the resistance structure the frame that made it rigid and not to bend. if you climb on it, in time it will turn into a banana... Not really safe...
*Exceeded my expectations, fast,sturdy, dependable, **Latest.Bike** . Great for city commute, Bike speaks for itself!!!Adam in customer service is great.*
Interesting. With all the free space where the engine used to be, you could mount a second battery pack and a storage container.
Nice Suggestion. ❤
Yes, definitely a nice storage, like a cool bag or something. In terms of battery, 100km sounds enough for daily use.
Second battery? Second front engine?
1111
1
sometimes I have reservations about such restorations
This man could even restore the titanic :)
Audio quality has improved a lot! Much better than your old videos! Love it!
Manna pry ga kia bike bnaya hy 👌👌
That's the most structurally solid motorcycle that I've seen
🤣
Brilliant piece of workmanship.
Thanks a lot
見事です賞賛に値する
you could make a small storage area in the engine block cavity
😱😱😱👍👍👍🙏🙏🙏👏👏👏Praise from Taiwan.
hi hallo sir intresting video sir
His shoe caught my eye… what the…. never seen that design before!
nice! looks like black tea bonfire
❤❤ good job
NICE VIDEO!
This is honda CG125, pakistani's fav bike
amazing person you are, just a super. *pro* work of towards the futuristic EV's, you have covered everything, thanks. JPN.
Impresionante trabajo, felicitaciones. Saludos desde Colombia.
Wao good idea
use LED lamps to save energy and plan for regenerative braking to increase the range. Rest all good, looks like you have more space beneath your legs !!!
Amazing bro
বাংলাদেশ থেকে দেখতেছি ❤️❤️🇧🇩
Great idea! Great work! Cheers!😀⚒️🛠️👍🔥
Shoes 👟 awesome
Love to watch your videos ❤
Fanstastic work 👏👌 thanks my friend👍👍👍
Nice work good
🐼 Big Panda Bear Hugs from a 68 yr old grandma in Texas, USA 🐼 ❤ 🎀 👍 🧚♂ 🐈 🧚 🍀 💐 🌸
good work
bike ka chasis kat dya aur oper se wazni battery b rakh di salam hy apki engineering ko
I wonder if there's a possibility for regenerative braking? That could extend the range a bit.
Better than honda engineer
Love it sure the motorbike thanks you
Great idea! Great work!
Too much of hard work and smart electric play, awesome combination ❤️👍
Looks Beautiful !
Thanks for a great video. It has given me inspiration to continue with my Honda h100 which was not half as bad as your Honda.
love it!! but i prefer putting cell in the middle of body to fill the empty.....
Công việc xuất sắc! Thực sự sự chăm chút cho những chi tiết nhỏ nhất là quá tuyệt vời! : D
Và luôn cẩn thận né tránh những phản ánh XD
Beautiful job.
excellent job done!!
Bravo 👌! but it would better to chose at least 3kw hub motor because after some time your electromotor will loose power and output will drop , you will feel it specially at roads with slope . 😊
Loved watching this! Well done. ;^)
Very nice
Love it!
love it nice job well done
Without an engine, 125 Looks funny. But I appreciate your step towards the future. Carry on bro..
Epic project
Very good 👍👍👍
Inspiring!
Комментарий в поддержку канала и ролика, а также труда мастера.
Really appreciate..
Seems like it's scooter hub as it is 12" hub.
Did you added holes for spokes ?
If yes any changes please
good wark
better than a new motorcycle!!
Wow amazing
Really apreciate your work. I just wondering You can put some storage under the 'fuel tank' so it can fill the 'empty space' where the engine used to place.
Great job !, but loved the painted on 'rust' espec on the alloy & plastics !
I don't think its fake. I didn't see painted rust. Can you give a timestamp. Could be a mild fake but thats unknown.
Nice idia ❤️
Parabéns ficou linda
Great. Nowadays most of the companies use engine space for batteries and place fuel tank having no use of it. You can use more batteries in the empty space of engine. Means double batteries and double milage. If it goes with single batteries for maximum 80KM/charge than it will be more than 160KM/charge. Or we can use one battery at once and then use 2nd one as a reserve. In both cases, we have a lot of space for anything we wish to install. Great great idea❤️❤️
Ammazing
Cg 125 stock engine makes lovely sound♥️👌🏻
Super super job brother 👍
A GENIUS
Nice
dobra przeróbka hehe :D
MashaAllah
Naas kar deya bhai tune bike ka engine nikal kar
Everything is just great
vip work man....
Keep up the Good work Jib***n
Great job
Круто
Aap ko mila hai 10 me 9number
Very interesting. problem I see is visual balance is lost with out front down tube. Replace with shielded parcel shelf to carry bags or boxes. Very nice video.
Supar
Please place a second battery where engine was placed before.... Overall tremendous work😘❤️❤️❤️
Can you upload complete guide about electric bike parts where we purchase that
good look good style, good like, good by the way front wheel better be black too, at the center. lets call this motorcycle werewolf)
👍👍👍👍👍
Interesting
Woww👍👍🙏🙏
Secondo me bisogna mettere qualche sostegno al posto del motore che aveva anche una funzione strutturale. Comunque bel lavoro
Well done... professional approach...but I think 1500 watt motor is under power. Isn't...
इंजन से रिक्त हुई जगह में स्टोरेज के लिए बॉक्स बनाकर लगाओ।🇮🇳🙏
A second battery at the engine bay would definetly help bring down the weight and center of gravity.
I used to have 1964 Honda CB 160 in PNG and my mate had SL 120. If only we had known would happen after all the years had passed.
well done
exports to others country.
I would have extended the front engine mount tube down to the foot peg mount, then added a storrage bag in the area that the engine was, so you can put your helmet there when not in use, or put groceries in it, a chain to lock the bike up, etc. Plus, you lost frame support when you removed it, so that would have kept the frame integrity.
Great build, you also may want to wait until ALL, of your modifications are completed before you paint, that way you wont have to paint certain items twice, as you did.
I want something like this, classic Honda meets modrn e-bike. I would preferaby go with a mid-drive motor to fill up that empty space as well as also allow for pedaling.
superbe...
عمل جيد
As you're able to see, there's a large area where the engine was located. You cut off the down tube. Do you know what that means? The headset isn't supported, which additionally means that it's not as strong as it was when the tube was there. There should be one there, to differ that headset tube.
love the work, but you made too many cuts in the frame do you think it will hold up?
awesome
3D print a stylish case below the tank, where the engine once was, and fill it with batteries, extending the range.
For those of you wondering, he is a Pakistani and this is a Pakistani bike. It's one of the most famous bikes in Pakistan, CG 125.