By the way, I was trying to order it to Amazon.com but I am not seeing this. Can you tell me the brand name of this or the complete name so I may try to search again to Amazon.com. Thank you
@@aliffdarfriz9107 It's not that easy. Some UV tempered glass screen protectors require heat right on the display to take them off. This happens when you buy cheap UV screen protectors. Get a really good one like Whitestone Dome, otherwise, avoid UV screen protectors.
I ruined my phone trying to install liquid loca uv glue screen protector. It's like penetrating oil n filled-up speaker hole with glue! Though I used tape to prevent glue from getting in, but didn't work. When I tried to clean that glue off, it ruined some original black screen lining. What a mess! Then I exchanged my phone with another one. One of the biggest mistakes of my life!
That's because you forgot to do two things: 1. After you finish installing the tempered glass screen protector go into phone settings and turn on sensitivity to max high. 2. And then go rescan your finger print scanner again so it works properly.
what happen if that glue. flow into my volume and power button because my power button and volume button loose and nearly remove. is that cause by the glue or my note 10 + is defective ??? its been only 4 days
Hello, Does this uv liquid stuff any damage to the display of the Smartphone? What if i take of the protector later? Do i get any markings on the display ? Im a little worried. Hope you understand what i mean. Thank you
@@levisama656 اذا كان الجهاز بدون حماية الشاشة، البصمة تعمل بشكل ممتاز مع تأخير بسيط لايشكل تأثير... لكن اذا كان الجهاز مع حماية الشاشة البصمة بتكون سيئة جداً.
That's because you forgot to do two things: 1. After you finish installing the tempered glass screen protector go into phone settings and turn on sensitivity to max high. 2. And then go rescan your finger print scanner again so it works properly.
Wow this is put on very sloppy! First of all you HAVE to cover up the power connect button at the bottom of the phone with the second piece of tape that comes with it. I laughed when I seen the guy just let the glue drop all over the face of the phone and didn't even use the sticker to clean off the lint and dust on the phone. Again...poorly put on Stick with Whitestone dome for your phone....
Power & Volume Buttons on the far left side of phone screen side you mean ? Just tape it up so the glue doesn't ooze into those gaps causing them to stick and harden correct ? How about the S-Pen can i still use it after installing the UV Liquid Glass Screen is it still responsive ?
That's because you forgot to do two things: 1. After you finish installing the tempered glass screen protector go into phone settings and turn on sensitivity to max high. 2. And then go rescan your finger print scanner again so it works properly.
The one Samsung provides sucks. It gets scratched up and tears easily because it isn't even designed to be used as an everyday screen protector. It's just applied for some protection during the manufacturing and packaging process.
Are you serious? I have a $1200 phone as I'm sure you do too if you have the 10+. The so called screen protector that came with it, that I saw when I had my Whitestone Done put on, was a joke. I thought for the price of these phones the screen protector would be more than a very thin piece of plastic. I was so relieved that I put on a real screen protector.
Thank you for this video....so helpful. Love it😊 by the way what is the title of the song in the background ? Thank you
Hall & Ludwiig - New Beginning
@@AndroidTrickz Thank you for your prompt response🙂👍
By the way, I was trying to order it to Amazon.com but I am not seeing this. Can you tell me the brand name of this or the complete name so I may try to search again to Amazon.com. Thank you
What is that blue thing for? What cable does it come with?
This can be removed easily or not..moreover on removal does it affect the screen?
You can very easily remove this without leaving any resedue on screen.
It will damage the screen
@@rodolfotsang4327 it wont damage the screen as its loca glue. Dont misguide him
It's very easy 2 revome its glue like a water it's not a gum
its identical to removing any other glass screen protector from any phone no difference at all i tried it myself 0 residue !
Great job bhai...
Whitestone Glass dome is the best for your phone. Cones with all necessary things to install successful and not mess up your phone.
Whitestone dome glass screen protector is so much better and comes with everything you need to install flawlessly.
Thank you instructions
Hello whats the name of the glass?cause it fits wellon all those edges
What is the blue thing for? What cable does it connect???
How do we take out the tempered glass and the glue after applying
Take out the glass with fingernail & clean the glue residue with alcohol sanitizer wipe
@@aliffdarfriz9107 It's not that easy. Some UV tempered glass screen protectors require heat right on the display to take them off. This happens when you buy cheap UV screen protectors. Get a really good one like Whitestone Dome, otherwise, avoid UV screen protectors.
fingerprint sensors works fine okey or not with it?
The fingerprint it's work normal?
Hola, ¿sabrias decirme si el protector afecta a la cámara selfie del Note 10 Plus? un saludo y gracias por el video.
Has it any front camera issue because this protector has no cut out for front camera????????
I ruined my phone trying to install liquid loca uv glue screen protector. It's like penetrating oil n filled-up speaker hole with glue! Though I used tape to prevent glue from getting in, but didn't work. When I tried to clean that glue off, it ruined some original black screen lining. What a mess! Then I exchanged my phone with another one. One of the biggest mistakes of my life!
U r right.. this type of screen protector is shit and crap
Location ? I'm ordeer
Where is ur shop sir
Ruqaiya sajid Amazon link in the description, You can place the order online
The call speaker is not damaged by the liquid?
Where is your shop, want shop address
You have a amazon link in the description to order the glass they are using, Hope that helps
If only the fingerprint scanner worked after.
It does you have to remove all and rescan each one and itll work fine
@@tdbone35 mine doesn't!
I'm going to buy another one and see!
@@tdbone35 what do u mean when u say remove all
@@richards.4409 Did you get it to work? I've been through so many screen protectors I'm so annoyed.
That's because you forgot to do two things:
1. After you finish installing the tempered glass screen protector go into phone settings and turn on sensitivity to max high.
2. And then go rescan your finger print scanner again so it works properly.
what happen if that glue. flow into my volume and power button
because my power button and volume button loose and nearly remove. is that cause by the glue or my note 10 + is defective ??? its been only 4 days
John Ray Franco Just soak the extra glue to the cloth you get with the glass, Remember just soak dont wipe 😊
D oí xd no o no zsk 😁😁😁😁😁😁😁😁😁😁😁😁😁😁🤘🤘🤘😁🎂😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😬😬🎂🎂🎂🎂🎂🎂
Cover those holes with tape before doing this.
Me installed in s9 plus perfectly work touch is amazing
Hello,
Does this uv liquid stuff any damage to the display of the Smartphone? What if i take of the protector later? Do i get any markings on the display ? Im a little worried.
Hope you understand what i mean.
Thank you
Yes probably
I advise u not to install this type of screen protector... go for simple glass or tpu protector
Don't do it! Don't! The Glue goes inside your Phone and destroys the Volume/Power Button.
Thanks for the warning. I won't put mine on :( wish samsung just used a side fingerprint sensor so i could use a normal screen protector
You can soak the extra glue to the micro fibre cloth, It proved to be a life saver for my earpiece and power/volume buttons
Im not doing this
@Dan Don your Mother is fat😂
Price
₹69,999/-
حطيت حمايه للشاشه نفس اللي بل صورة و البصمه ماعد تشتغل ب نسبه 80 %
انت قدام خيارين
الشاشه بدون حمايه
بدون بصمه
جهازي نوت ١٠ بلس 😑😐
صراحة بصمة النوت 10 فاشلة
@@firasfmj صح هادا الي يقهرني
@@levisama656
اذا كان الجهاز بدون حماية الشاشة، البصمة تعمل بشكل ممتاز مع تأخير بسيط لايشكل تأثير...
لكن اذا كان الجهاز مع حماية الشاشة البصمة بتكون سيئة جداً.
هل توجد نفس الحمايه في جده
هل توجد نفس الحمايه في جده
Awesome thanks
Can this be removed easily the full glue protector
Muito show o seu trabalho
Oi
Nice
For some reason my fingerprint scanner didn't work with a glass screen protector
I've found out if you press the area where the FPScanner is you'll get better results
Try to remap your finger prints again after the installation, Hope that helps you. It worked for me
Had the same problem so i removed it .
That's because you forgot to do two things:
1. After you finish installing the tempered glass screen protector go into phone settings and turn on sensitivity to max high.
2. And then go rescan your finger print scanner again so it works properly.
Tony Tran I did that exactly and didn’t work at all, so I gave up after spending $100 on dome glass and now have nothing on it
Mere phone me yahi glass lagaya hai lekin finger print Kam nahi karta hai
How hard is it to take these off
what price only one peace
Muy bueno para proteger la pantalla
CADE OS BR????
Why note 20 ultra not working
if the screen covers the selfie cam thats a no go
It doesnt affect the camera at all.
@@tdbone35 yeah it does . 2 of my friends has it and we end up using my phone for selfies you will no it it in a low light as restaurant, pub, bar
اخطر اغلفة على الهاتف
Song name??
Muito bacana
I hope Samsung stop doing edge screen, it is hard to install the glasa on phone🙏🏻🙏🏻🙏🏻
Vivo nex 3 screen protector sir
hii
Wow this is put on very sloppy! First of all you HAVE to cover up the power connect button at the bottom of the phone with the second piece of tape that comes with it. I laughed when I seen the guy just let the glue drop all over the face of the phone and didn't even use the sticker to clean off the lint and dust on the phone. Again...poorly put on Stick with Whitestone dome for your phone....
Power & Volume Buttons on the far left side of phone screen side you mean ?
Just tape it up so the glue doesn't ooze into those gaps causing them to stick and harden correct ?
How about the S-Pen can i still use it after installing the UV Liquid Glass Screen is it still responsive ?
Great!!!
Fingerprint doesnt work most of the time .
That's because you forgot to do two things:
1. After you finish installing the tempered glass screen protector go into phone settings and turn on sensitivity to max high.
2. And then go rescan your finger print scanner again so it works properly.
adds please
This is pointless. Just buy a compatible glass protector or leave the one on that samsung provided.
The one Samsung provides sucks. It gets scratched up and tears easily because it isn't even designed to be used as an everyday screen protector. It's just applied for some protection during the manufacturing and packaging process.
@@liquidxlucidity7976 wrong. It clearly says it can be left on. I dont have a single scratch on mine and I've had my phone for over a month now.
@idq23 you are talking bullshit that protecter is to prevent scratches during manufacturing
Are you serious? I have a $1200 phone as I'm sure you do too if you have the 10+. The so called screen protector that came with it, that I saw when I had my Whitestone Done put on, was a joke. I thought for the price of these phones the screen protector would be more than a very thin piece of plastic. I was so relieved that I put on a real screen protector.
Круто