As a gold and silversmith I am so thoroughly impressed with your methodical and meticulous work. I aspire to gain the level of patience and attention you display in this as well as your older videos.
This is amazing! Thanks so much! Quick question, when you’re pushing the bezel/setting the stone is that a pneumatic tool you’re using to do so? Thanks so much!
This video teaches me the right way to set a surqe bazzel. Thanks for this video.and I am happy to say that i have such a great teacher like you. In the end thanks alot ❤❤❤ And 1 request if you don't mind that kindly plz upload more video i glad to learn from it..... Your student: Abdullah khalid
@@noormemon3534 i cant express how i appreciate your words. Some may say - hey bro, its just a RUclips-Channel, come down, you even don‘t know this person. BUT this craft is a place where i can flourish in which i can express myself and so a lot of others like you i think. After so many years i want to share what i learned by so many skilled people and that i figured out myself. Once fallen on a fertile soil it will grow.
Hello, What is that paint stuff that you put on the ring prior to the beginning of the video? You took it off with a solution and a Q-tip. I suppose that makes it easier to see where you are removing metal?
The so called „occlusion“ spray coats the metal with a thin film. When i insert the stone you see exactly where the stone has contact. Thats the only (safe) way to make sure there is a regular and even contact with the metal. I removed it because i don‘t want the green spray trapped between the stone and the metal, especially with whitegold that gets a rhodium coating it has to be very clean. Also ultrasonic cant remove 100% of trapped powder.
@@paulbarfield4033 🙏 - Make sure you do not get in contact with your tools and sandpaper! When you do the brightcut polish the contact point of the graver where it could meet the stone - so it will slide on the stone instead of scratching it. And always - no force against the stone!!
This technique is truly Amazing with awesome work....But in my country(cambodia) i'm setting this stone it cost only 2$ per stone 🙏🏻❤️😢 but if the stone are expensive it's cost 10$ per setting .... if i break it .... my life ...,,,,,,D😢😢😢
Its a carbide ball bur. Most of the time i use carbide tools. There are some downsides, and much more expensive, but the edge stays so much longer, and i can work much quicker. All the best ❤️
Just found you great vid ,is the occlusion medium you use water based or some other carrier? If you have trouble removeing it with ultra sonic cleaner ,obtain a baby food jar ,put solvent and un mounted piece with jar lid secured ,and put in ultrasonic cleaner, cheers John👍🇦🇺🐈⬛😎
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
As a gold and silversmith I am so thoroughly impressed with your methodical and meticulous work.
I aspire to gain the level of patience and attention you display in this as well as your older videos.
I really appreciate your kind words!
Thank you very much ❤️
What an incredibly useful resource for newbies to jewelry and stone setting like myself! Thanks so much for posting!
You are so welcome! ❤
What a stunning ability and perfect execution of the becel setting !!! A real master class , thanks for sharing and salutes from Colombia !! 🙏😎👍🇨🇴
It has elapsed such a long time since i watch a new video from you. Always an inspiration to follow.
Beautifully done! You got some new tools. Patience and precision wonderfully displayed.
Thank you very much! Yeah 😎
@@thediamondsetter6158sorry I got you mixed up with diamond mounter channel. You’re excellent at setting stones him not as good.
Thanks for another great video...especially showing how you made the bright cut engraver...hope to try this technique.
Have fun! Hope it helps ☀️🙏🔥
What an hypnotic thrill to watch! Thank you!
Can we point out the camera work that made sharing this possible? I mean damn, big crowd service with that
Thank you! I’ve been looking for this ❤
🙏
Sir your work was flawless!! My best regards and thank you for sharing
Beautiful video Thankyou
Using the airbrush to identify high points is very clever. I've never seen that before.
Yeah, what does he spray?
אומן פשוט מדהים
This is really helpful for my autism
Fascinating to watch
Cool home-made cutting tool!
Thak You for sharing your way. Excellent video.
你是一位很好的老师，希望你能教授一些珠宝知识
This is amazing! Thanks so much! Quick question, when you’re pushing the bezel/setting the stone is that a pneumatic tool you’re using to do so? Thanks so much!
THX so much 🙏!
Yes its a pneumatic System from JURA - TOOLS. Best tools out there 🔥
My respects Master
This video teaches me the right way to set a surqe bazzel. Thanks for this video.and I am happy to say that i have such a great teacher like you. In the end thanks alot ❤❤❤
And 1 request if you don't mind that kindly plz upload more video i glad to learn from it.....
Your student:
Abdullah khalid
Thank you very much for your kind words! 🙏
In 1975 I worked. At Haton Garden. Last 50 years in California. Love. The. Focus. You have. Thank you, Guru.
@@noormemon3534 i cant express how i appreciate your words. Some may say - hey bro, its just a RUclips-Channel, come down, you even don‘t know this person. BUT this craft is a place where i can flourish in which i can express myself and so a lot of others like you i think. After so many years i want to share what i learned by so many skilled people and that i figured out myself. Once fallen on a fertile soil it will grow.
You sprayed it with a green coloured powder to find where the stone touched metal?
Yes
Perfect
Thank you so much
Hello, What is that paint stuff that you put on the ring prior to the beginning of the video? You took it off with a solution and a Q-tip. I suppose that makes it easier to see where you are removing metal?
It's probably Seat Check Disclosure Powder. Really helps you see where the stone is touching.
The so called „occlusion“ spray coats the metal with a thin film. When i insert the stone you see exactly where the stone has contact. Thats the only (safe) way to make sure there is a regular and even contact with the metal.
I removed it because i don‘t want the green spray trapped between the stone and the metal, especially with whitegold that gets a rhodium coating it has to be very clean. Also ultrasonic cant remove 100% of trapped powder.
Lovely work, one question how do you not scratch the stone?
@@paulbarfield4033 🙏 - Make sure you do not get in contact with your tools and sandpaper! When you do the brightcut polish the contact point of the graver where it could meet the stone - so it will slide on the stone instead of scratching it. And always - no force against the stone!!
@@thediamondsetter6158thank you so much for the reply 👍
This technique is truly Amazing with awesome work....But in my country(cambodia) i'm setting this stone it cost only 2$ per stone 🙏🏻❤️😢 but if the stone are expensive it's cost 10$ per setting .... if i break it .... my life ...,,,,,,D😢😢😢
Wow! Amazing! Herzlichen Dank! What‘s the tool at minute 55?
Its a carbide ball bur. Most of the time i use carbide tools. There are some downsides, and much more expensive, but the edge stays so much longer, and i can work much quicker.
All the best ❤️
What is the green stuff that you spread in to the ring
Super🎉🎉🎉🎉🎉
like your video
what is the blue spray?
Not exactly sure but I imagine it’s to see where he needs to grind more material to get a good fit
Just found you great vid ,is the occlusion medium you use water based or some other carrier?
If you have trouble removeing it with ultra sonic cleaner ,obtain a baby food jar ,put solvent and un mounted piece with jar lid secured ,and put in ultrasonic cleaner, cheers John👍🇦🇺🐈⬛😎
Очень круто 👍🏻👍🏻👍🏻