Great video, thanks for sharing. I have a ABA set of Marx Rock Island E7 plastic diesels with the same paint scheme. Marx didn't make any passenger cars for their E7's so making some is a great idea.
Great vidio, love the cars, had fun with 12 cars and put red strip on one side only so as she runs around , like 2 sets.Thanks for the morning coffee...
To do the Lionel Lines and name plate lettering, you could use a plexiglass plate and hard rubber ink roller (available at Michael's used for rubber stamping) with the appropriate color acrylic paint and roll over the raised lettering with a thin layer of paint (the plexiglass plate used to get the paint spread out thin and evenly).
That set of Lionel 2400 series cars was in good shape. I would have sold them and ordered a much worse set of cars to repaint. The painting and lettering looks good.
When spray painting: always start spraying off the model and don't interrupt the flow until you complete the stroke. Starting and stopping mid-stroke can cause droplets to form on your model. If the pressure in the can drops, put it in a pan of warm water for awhile. The heat will increase spray pressure for more uniform results.
I use oven cleaner to strip the old paint that contains nicks. And follow up pretty much the same as you show. I have not done any passenger car but quite a number of diesel engine shells. Heat stamped areas need sanding and filling if you want different graphics. Stick on individual transfers (white, red, black, gold, & silver) covers well if you want the same lettering/numbers. Yes Amazon has everything. I find these stick on’s nicer looking compared to water decals, not having clear edges that show against the paint. Very nice presentation.😊 I like the striping you did on the passenger cars better than Lionel did on the engines. I would be tempted to make engines match passenger cars. Nice.
Those letters definitely made it pop! In all honesty though those were a little on the rough side and they were painted originally anyway. If one were to want to put them back correctly it’s just a paint job away from being restored to original configuration. They look great!
Nice video. The shells on those cars looked to be in good shape. I have a set that I bought for 55 bucks, that is in real good shape and my two originals from my brother's set are in good shape, also, so I don't want to mess with them. I have a few that are roached-out and I would like to paint them in Tuscan Red, to run behind my 681 or 2025 Pennsy engines. Those lettering inserts are pretty cool, too. Are they a soft or hard material? Also, are they pliable enough as to make sure that you can manipulate them into the heat-stamp? Either way, those cars turned out real nice. As always, an excellent tutorial and video.
It require the heat stamped area be sanded to remove a bit of the rough lip to allow better adhesion. The size match up is near perfect using the letters from Amazon. I have yet to find the numbers (like 2023 Alco engine) in the same font as the Amazon letters. Handing requires awareness as not as durable as paint/heat stamp.
Awesome custom job, they look amazing. That white pinstriping really set it off, and the gold lettering was definitely the way to go. 💯
Excellent video!
Great video, thanks for sharing. I have a ABA set of Marx Rock Island E7 plastic diesels with the same paint scheme. Marx didn't make any passenger cars for their E7's so making some is a great idea.
Great vidio, love the cars, had fun with 12 cars and put red strip on one side only so as she runs around , like 2 sets.Thanks for the morning coffee...
You do fantastic work, they’re nice.
To do the Lionel Lines and name plate lettering, you could use a plexiglass plate and hard rubber ink roller (available at Michael's used for rubber stamping) with the appropriate color acrylic paint and roll over the raised lettering with a thin layer of paint (the plexiglass plate used to get the paint spread out thin and evenly).
That set of Lionel 2400 series cars was in good shape. I would have sold them and ordered a much worse set of cars to repaint. The painting and lettering looks good.
The cars seem to match the engines as something that Lionel would have offered if the thought of it. I do like the results.
When spray painting: always start spraying off the model and don't interrupt the flow until you complete the stroke. Starting and stopping mid-stroke can cause droplets to form on your model.
If the pressure in the can drops, put it in a pan of warm water for awhile. The heat will increase spray pressure for more uniform results.
I use oven cleaner to strip the old paint that contains nicks. And follow up pretty much the same as you show. I have not done any passenger car but quite a number of diesel engine shells. Heat stamped areas need sanding and filling if you want different graphics. Stick on individual transfers (white, red, black, gold, & silver) covers well if you want the same lettering/numbers. Yes Amazon has everything. I find these stick on’s nicer looking compared to water decals, not having clear edges that show against the paint. Very nice presentation.😊 I like the striping you did on the passenger cars better than Lionel did on the engines. I would be tempted to make engines match passenger cars. Nice.
Those letters definitely made it pop! In all honesty though those were a little on the rough side and they were painted originally anyway. If one were to want to put them back correctly it’s just a paint job away from being restored to original configuration. They look great!
Those passenger cars came out sharp! Very well done.
Keep having fun!
Great video, cars look amazing, gold lettering really added a nice touch, well done! I enjoy seeing your process on these projects, thanks
💯!!!
Gives a rich, fresh look to what is familiar. Going to bookmark if I ever decide to do something with my Lehigh Valley stock.
Nice job saving the junk
So the gold letters were just stuck on individually over the old heat stamp? Nice job getting them aligned straight
Nice video. The shells on those cars looked to be in good shape. I have a set that I bought for 55 bucks, that is in real good shape and my two originals from my brother's set are in good shape, also, so I don't want to mess with them. I have a few that are roached-out and I would like to paint them in Tuscan Red, to run behind my 681 or 2025 Pennsy engines. Those lettering inserts are pretty cool, too. Are they a soft or hard material? Also, are they pliable enough as to make sure that you can manipulate them into the heat-stamp? Either way, those cars turned out real nice. As always, an excellent tutorial and video.
It require the heat stamped area be sanded to remove a bit of the rough lip to allow better adhesion. The size match up is near perfect using the letters from Amazon. I have yet to find the numbers (like 2023 Alco engine) in the same font as the Amazon letters. Handing requires awareness as not as durable as paint/heat stamp.
Nice job
Do you have a link to Amazon for the letters. Thanks. I might try something like this when I get more courage
www.amazon.com/Stickers-Metallic-Decorative-Journaling-Scrapbook/dp/B09NMZBRBB/ref=sr_1_2?crid=2CICFDSDO100F&dib=eyJ2IjoiMSJ9.f2FvGJ1kVOv7BghKeXCQAl2uDgTNLc5OGrZNCrHXEqNtDbC7jRPUVkVqeq-gtyaN-e2XTw7AMmFu_-YRdWNGeM443Yk6r1oLLkF9Dv-nWaEM0TxuLp391cWdUu6628Gnnb7PcpF_fAe1G0t7KXJffV8oAGtMfaTpbbjGw_FqoRAEHB08cqA1eZZlCePvpXUiH4i_d6XvzjtEMU9VMx_b-CXR3LPzEsyxZGKSfnmCuRmSaS3wdeJL1IENE8GQjz3K9ggstmDKM8jVLrdTNjbDDg2yVTsgexgryQ99ZLXuLE8.S18ZwJjavx6aMJGf3ye3EabDZseKKOmIiVP6bYLxHMA&dib_tag=se&keywords=32+Sheets+Small+Letter+Stickers+Mini+Metallic+Number+Stickers+Self+Adhesive+Alphabet+Labels+for+Decorative+Diary+Journaling+Scrapbook+Arts+DIY+Crafts+Golden+Silver+3+mm%2C+4.5+mm%2C+7+mm&qid=1712341906&sprefix=32+sheets+small+letter+stickers+mini+metallic+number+stickers+self+adhesive+alphabet+labels+for+decorative+diary+journaling+scrapbook+arts+diy+crafts+golden+silver+3+mm%2C+4.5+mm%2C+7+mm%2Caps%2C119&sr=8-2
Where on amazon did you find the letters?
OOOO you want all my secrets... www.amazon.com/dp/B09NMZBRBB?psc=1&ref=ppx_yo2ov_dt_b_product_details
@@fau008 Thanks lol
Yikes!